Hello I have put /tmp on the ramdisk as well, just forgot to mention it. The noatime option I'm not familiar with, I'll look at it when I get back to the office.
Thanks for the tips. On Tue, 5 Mar 2002, Iskender YIGITEL wrote: > Hi, You should also put /tmp on ramdisk. And mount the flash with noatime > option if you have not already done it. I think you have turned swapping > off. If not you'd better to turn swapping off while using a flashdisk. > I' m not sure about the reason but these are worth to check > anyway. > > > Best regards > Iskender Yigitel > > On Mon, 4 Mar 2002 [EMAIL PROTECTED] wrote: > > > Howdy- > > > > Hope you can help with this one. > > > > I can run tinylogin under a full install of RH 6.2 linux, and it works > > wonderfully on the serial port, console, etc. However, I am trying to > > customize a system for flash disk, so most of the system is read only. > > There are a few filesystems that are held in ramdisks and so are > > read-write, like /dev, /var/run, /var/log/, etc. When I run it under this > > system, the console is fine, but the serial connection is SLOWWWWW! It > > takes approximately 30-45 seconds for the login prompt to apear, another > > 20 seconds for root to appear after I type it on the keyboard. > > > > Any ideas? > > > > Thanks! > > > > -- To unsubscribe from this list, send a message to [EMAIL PROTECTED] with the command "unsubscribe linux-embedded" in the message body. For more information, see <http://waste.org/mail/linux-embedded>.
