On Apr 16, 2007 21:22 +1000, David Chinner wrote: > On Thu, Apr 12, 2007 at 05:05:50AM -0600, Andreas Dilger wrote: > > struct fiemap_extent { > > __u64 fe_start; /* starting offset in bytes */ > > __u64 fe_len; /* length in bytes */ > > } > > > > struct fiemap { > > struct fiemap_extent fm_start; /* offset, length of desired mapping */ > > __u32 fm_extent_count; /* number of extents in array */ > > __u32 fm_flags; /* flags (similar to XFS_IOC_GETBMAP) */ > > __u64 unused; > > struct fiemap_extent fm_extents[0]; > > } > > > > #define FIEMAP_LEN_MASK 0xff000000000000 > > #define FIEMAP_LEN_HOLE 0x01000000000000 > > #define FIEMAP_LEN_UNWRITTEN 0x02000000000000 > > I'm not sure I like stealing bits from the length to use a flags - > I'd prefer an explicit field per fiemap_extent for this.
Christoph expressed the same concern. I'm not dead set against having an extra 8 bytes per extent (32-bit flags, 32-bit reserved), though it may mean the need for 50% more ioctls if the file is large. Below is an aggregation of the comments in this thread: struct fiemap_extent { __u64 fe_start; /* starting offset in bytes */ __u64 fe_len; /* length in bytes */ __u32 fe_flags; /* FIEMAP_EXTENT_* flags for this extent */ __u32 fe_lun; /* logical storage device number in array */ } struct fiemap { __u64 fm_start; /* logical start offset of mapping (in/out) */ __u64 fm_len; /* logical length of mapping (in/out) */ __u32 fm_flags; /* FIEMAP_FLAG_* flags for request (in/out) */ __u32 fm_extent_count; /* number of extents in fm_extents (in/out) */ __u64 fm_unused; struct fiemap_extent fm_extents[0]; } /* flags for the fiemap request */ #define FIEMAP_FLAG_SYNC 0x00000001 /* flush delalloc data to disk*/ #define FIEMAP_FLAG_HSM_READ 0x00000002 /* retrieve data from HSM */ #define FIEMAP_FLAG_INCOMPAT 0xff000000 /* must understand these flags*/ /* flags for the returned extents */ #define FIEMAP_EXTENT_HOLE 0x00000001 /* no space allocated */ #define FIEMAP_EXTENT_UNWRITTEN 0x00000002 /* uninitialized space */ #define FIEMAP_EXTENT_UNKNOWN 0x00000004 /* in use, location unknown */ #define FIEMAP_EXTENT_ERROR 0x00000008 /* error mapping space */ #define FIEMAP_EXTENT_NO_DIRECT 0x00000010 /* no direct data access */ SUMMARY OF CHANGES ================== - use fm_* fields directly in request instead of making it a fiemap_extent (though they are layed out identically) - separate flags word for fm_flags: - FIEMAP_FLAG_SYNC = range should be synced to disk before returning mapping, may return FIEMAP_EXTENT_UNKNOWN for delalloc writes otherwise - FIEMAP_FLAG_HSM_READ = force retrieval + mapping from HSM if specified (this has the opposite meaning of XFS's BMV_IF_NO_DMAPI_READ flag) - FIEMAP_FLAG_XATTR = omitted for now, can address that in the future if there is agreement on whether that is desirable to have or if it is better to call ioctl(FIEMAP) on an XATTR fd. - FIEMAP_FLAG_INCOMPAT = if flags are set in this mask in request, kernel must understand them, or fail ioctl with e.g. EOPNOTSUPP, so that we don't request e.g. FIEMAP_FLAG_XATTR and kernel ignores it - __u64 fm_unused does not take up an extra space on all power-of-two buffer sizes (would otherwise be at end of buffer), and may be handy in the future. - add separate fe_flags word with flags from various suggestions: - FIEMAP_EXTENT_HOLE = extent has no space allocation - FIEMAP_EXTENT_UNWRITTEN = extent space allocation but contains no data - FIEMAP_EXTENT_UNKNOWN = extent contains data, but location is unknown (e.g. HSM, delalloc awaiting sync, etc) - FIEMAP_EXTENT_ERROR = error mapping extent. Should fe_lun == errno? - FIEMAP_EXTENT_NO_DIRECT = data cannot be directly accessed (e.g. data encrypted, compressed, etc), may want separate flags for these? - add new fe_lun word per extent for filesystems that manage multiple devices (e.g. OCFS, GFS, ZFS, Lustre). This would otherwise have been unused. > Given that xfs_bmap uses extra information from the filesystem > (geometry) to display extra (and frequently used) information > about the alignment of extents. ie: > > chook 681% xfs_bmap -vv fred > fred: > EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL FLAGS > 0: [0..151]: 288444888..288445039 8 (1696536..1696687) 152 00010 > FLAG Values: > 010000 Unwritten preallocated extent > 001000 Doesn't begin on stripe unit > 000100 Doesn't end on stripe unit > 000010 Doesn't begin on stripe width > 000001 Doesn't end on stripe width Can you clarify the terminology here? What is a "stripe unit" and what is a "stripe width"? Are there "N * stripe_unit = stripe_width" in e.g. a RAID 5 (N+1) array, or N-disk RAID 0? Maybe vice versa? I don't mind adding this, as long as it's clear that some filesystems don't have this kind of information. > This information could be easily passed up in the flags fields if the > filesystem has geometry information (there go 4 more flags ;). Got lots of flag bits now. > Also - what are the explicit sync semantics of this ioctl? The > XFS ioctl causes a fsync of the file first to convert delalloc > extents to real extents before returning the bmap. Is this functionality > going to be the same? If not, then we need a DELALLOC flag to indicate > extents that haven't been allocated yet. This might be handy to > have, anyway.... Have added a FIEMAP_FLAG_SYNC on the request to sync if applications care, and FIEMAP_EXTENT_UNKNOWN can handle unmapped extents for delalloc. > > The fm_extents array > > returned contains the packed list of allocation extents for the file, > > including entries for holes (which have fe_start == 0, and a flag). > > Internalling in XFS, we pass these around as: > > #define DELAYSTARTBLOCK ((xfs_fsblock_t)-1LL) > #define HOLESTARTBLOCK ((xfs_fsblock_t)-2LL) We could do this too, instead of having flags, but many of the proposed flags are orthogonal so we'd end up needing a lot of separate values here and it would just degenerate into the FIEMAP_LEN_MASK I previously suggested. > > required expanding the per-extent struct from 32 to 48 bytes per extent, > > not sure I follow your maths here? That was the case for XFS getbmap vs. getbmapx. For FIEMAP it increases the extent size from 16 to 24 bytes. > > Caller works something like: > > > > char buf[4096]; > > struct fiemap *fm = (struct fiemap *)buf; > > int count = (sizeof(buf) - sizeof(*fm)) / sizeof(fm_extent); > > > > fm->fm_start.fe_start = 0; /* start of file */ > > fm->fm_start.fe_len = -1; /* end of file */ > > fm->fm_extent_count = count; /* max extents in fm_extents[] array */ > > fm->fm_flags = 0; /* maybe "no DMAPI", etc like XFS */ > > > > fd = open(path, O_RDONLY); > > printf("logical\t\tphysical\t\tbytes\n"); > > > > /* The last entry will have less extents than the maximum */ > > while (fm->fm_extent_count == count) { > > fm_extent_count is an in/out parameter? Correct. > > > rc = ioctl(fd, FIEMAP, fm); > > if (rc) > > break; > > > > /* kernel filled in fm_extents[] array, set fm_extent_count > > * to be actual number of extents returned, leaves fm_start > > * alone (unlike XFS_IOC_GETBMAP). */ > > Ok, it is. > > > for (i = 0; i < fm->fm_extent_count; i++) { > > __u64 len = fm->fm_extents[i].fe_len & FIEMAP_LEN_MASK; > > __u64 fm_next = fm->fm_start.fe_start + len; > > int hole = fm->fm_extents[i].fe_len & FIEMAP_LEN_HOLE; > > int unwr = fm->fm_extents[i].fe_len & > > FIEMAP_LEN_UNWRITTEN; > > > > printf("%llu-%llu\t%llu-%llu\t%llu\t%s%s\n", > > fm->fm_start.fe_start, fm_next - 1, > > hole ? 0 : fm->fm_extents[i].fe_start, > > hole ? 0 : fm->fm_extents[i].fe_start + > > fm->fm_extents[i].fe_len - 1, > > len, hole ? "(hole) " : "", > > unwr ? "(unwritten) " : ""); > > > > /* get ready for printing next extent, or next ioctl */ > > fm->fm_start.fe_start = fm_next; > > Ok, so the only way you can determine where you are in the file > is by adding up the length of each extent. What happens if the file > is changing underneath you e.g. someone punches out a hole > in teh file, or truncates and extends it again between ioctl() > calls? Well, that is always true with data once it is out of the caller. > Also, what happens if you ask for an offset/len that doesn't map to > any extent boundaries - are you truncating the extents returned to > teh off/len passed in? The request offset will be returned as the start of the actual extent that it falls inside. And the returned extents will end with the extent that ends at or after the requested fm_start + fm_len. > xfs_bmap gets around this by finding out how many extents there are in the > file and allocating a buffer that big to hold all the extents so they > are gathered in a single atomic call (think sparse matrix files).... Yeah, except this might be persistent for a long time if it isn't fully read with a single ioctl and the app never continues reading but doesn't close the fd. > > I'm not wedded to an ioctl interface, but it seems consistent with FIBMAP. > > I'm quite open to suggestions at this point, both in terms of how usable > > the fiemap data structures are by the caller, and if we need to add anything > > to make them more flexible for the future. > > ioctl is fine by me. perhaps a version number in the structure header > would be handy so we can modify the interface easily in the future > without having to worry about breaking userspace.... Yeah, but premature optimization and such. Would rather have INCOMPAT flags instead of version numbers. > > In terms of implementing this in the kernel, there was originally code for > > this during the development of the ext3 extent patches and it was done via > > a callback in the extent tree iterator so it is very efficient. I believe > > it implements all that is needed to allow this interface to be mapped > > onto XFS_IOC_BMAP internally (or vice versa). > > I wouldn't map the ioctls - I'd just write another interface to > xfs_getbmap(). That way we could eventually get rid of the XFS_IOC_BMAP > interface. is there any code yet? Up to you, I was just suggesting "mapping" in the generic sense. The flags and values would all have to be changed anyways. Cheers, Andreas -- Andreas Dilger Principal Software Engineer Cluster File Systems, Inc. - To unsubscribe from this list: send the line "unsubscribe linux-ext4" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html