I have a problem during install on a SCSI-system with one 18GB disk, after the partitioning is completed, the system reboots immediately, probably before mounting is attempted.
I have verified that the partitions are created.
At ther moment I have no other logging than faimond, which last line is TASKBEGIN partition
My software: fai 2.5.4 fai-kernels 1.6 i386 kernel 2.4.24 debian stable with updates
My setup is using PXE-boot, and the partitioning is defined as follows
disk_config sda
primary /fai-boot 16 rw,errors=remount-ro ; -j ext3 -c
primary / 512 rw,errors=remount-ro ; -j ext3 -c
logical swap 1024 logical /var 2024 rw ; -m 5 -j ext3
logical /usr 4096 rw ; -j ext3
logical /usr/local 4096 rw ; -j ext3
logical /tmp 512 rw,nosuid ; -j ext3 -m 1
logical /home 2096 rw,nosuid ; -j ext3 -m 0
logical /files/scratch 0- rw,nosuid ; -j ext3 -i 50000 -m 1
The last output on the monitor before reboot is:
Calling task_partition Partitioning local harddisks SCSI device sda: . . . . SCSI device sda . . .
Any suggestions ?
Regards Bjørn Kastnes