On Wed, May 30, 2007 at 09:52:49AM -0700, [EMAIL PROTECTED] wrote: > On Wed, 30 May 2007, David Chinner wrote: > >with the barrier is on stable storage when I/o completion is > >signalled. The existing barrier implementation (where it works) > >provide these requirements. We need barriers to retain these > >semantics, otherwise we'll still have to do special stuff in > >the filesystems to get the semantics that we need. > > one of us is misunderstanding barriers here.
No, I thinkwe are both on the same level here - it's what barriers are used for that is not clear understood, I think. > you are understanding barriers to be the same as syncronous writes. (and > therefor the data is on persistant media before the call returns) No, I'm describing the high level behaviour that is expected by a filesystem. The reasons for this are below.... > I am understanding barriers to only indicate ordering requirements. things > before the barrier can be reordered freely, things after the barrier can > be reordered freely, but things cannot be reordered across the barrier. Ok, that's my understanding of how *device based barriers* can work, but there's more to it than that. As far as the filesystem is concerned the barrier write needs to *behave* exactly like a sync write because of the guarantees the filesystem has to provide userspace. Specifically - sync, sync writes and fsync. This is the big problem, right? If we use barriers for commit writes, the filesystem can return to userspace after a sync write or fsync() and an *ordered barrier device implementation* may not have written the blocks to persistent media. If we then pull the plug on the box, we've just lost data that sync or fsync said was successfully on disk. That's BAD. Right now a barrier write on the last block of the fsync/sync write is sufficient to prevent that because of the FUA on the barrier block write. A purely ordered barrier implementation does not provide this guarantee. This is the crux of my argument - from a filesystem perspective, there is a *major* difference between a barrier implemented to just guaranteeing ordering and a barrier implemented with a flush+FUA or flush+write+flush. IOWs, there are two parts to the problem: 1 - guaranteeing I/O ordering 2 - guaranteeing blocks are on persistent storage. Right now, a single barrier I/O is used to provide both of these guarantees. In most cases, all we really need to provide is 1); the need for 2) is a much rarer condition but still needs to be provided. > if I am understanding it correctly, the big win for barriers is that you > do NOT have to stop and wait until the data is on persistant media before > you can continue. Yes, if we define a barrier to only guarantee 1), then yes this would be a big win (esp. for XFS). But that requires all filesystems to handle sync writes differently, and sync_blockdev() needs to call blkdev_issue_flush() as well.... So, what do we do here? Do we define a barrier I/O to only provide ordering, or do we define it to also provide persistent storage writeback? Whatever we decide, it needs to be documented.... Cheers, Dave. -- Dave Chinner Principal Engineer SGI Australian Software Group - To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html