Hi David,
On Thu, Dec 12, 2013 at 10:15:58AM -0800, David Cohen wrote:
> On Thu, Dec 12, 2013 at 11:18:41AM +0200, Baruch Siach wrote:
> > GPIO32 is a standard optional extension to the Xtensa architecture core that
> > provides preconfigured output and input ports for intra SoC signaling. The
> > GPIO32 option is implemented as 32bit Tensilica Instruction Extension (TIE)
> > output state called EXPSTATE, and 32bit input wire called IMPWIRE. This
> > driver treats input and output states as two distinct devices.
> >
> > Signed-off-by: Baruch Siach <[email protected]>
> > ---
> > v3:
> > * Use BUG() in xtensa_impwire_set_value() to indicate that it should
> > never
> > be called (Linus Walleij)
> >
> > v2:
> > * Address the comments of Linus Walleij:
> > - Add a few comments
> > - Expand commit log message
> > - Use the BIT() macro for bit offsets
> > - Rewrite CPENABLE handling as static inlines
> > - Use device_initcall()
> >
> > * Depend on !SMP for reason explained in the comments (Marc Gauthier)
> >
> > * Use XCHAL_CP_ID_XTIOP to enable/disable GPIO32 only
> > ---
> > drivers/gpio/Kconfig | 8 +++
> > drivers/gpio/Makefile | 1 +
> > drivers/gpio/gpio-xtensa.c | 163
> > +++++++++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 172 insertions(+)
> > create mode 100644 drivers/gpio/gpio-xtensa.c
> >
> > diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> > index 0f04444..67f5ce6 100644
> > --- a/drivers/gpio/Kconfig
> > +++ b/drivers/gpio/Kconfig
> > @@ -281,6 +281,14 @@ config GPIO_XILINX
> > help
> > Say yes here to support the Xilinx FPGA GPIO device
> >
> > +config GPIO_XTENSA
> > + bool "Xtensa GPIO32 support"
> > + depends on XTENSA
> > + depends on !SMP
> > + help
> > + Say yes here to support the Xtensa internal GPIO32 IMPWIRE (input)
> > + and EXPSTATE (output) ports
> > +
> > config GPIO_VR41XX
> > tristate "NEC VR4100 series General-purpose I/O Uint support"
> > depends on CPU_VR41XX
> > diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> > index 7971e36..23b9c72 100644
> > --- a/drivers/gpio/Makefile
> > +++ b/drivers/gpio/Makefile
> > @@ -95,3 +95,4 @@ obj-$(CONFIG_GPIO_WM831X) += gpio-wm831x.o
> > obj-$(CONFIG_GPIO_WM8350) += gpio-wm8350.o
> > obj-$(CONFIG_GPIO_WM8994) += gpio-wm8994.o
> > obj-$(CONFIG_GPIO_XILINX) += gpio-xilinx.o
> > +obj-$(CONFIG_GPIO_XTENSA) += gpio-xtensa.o
> > diff --git a/drivers/gpio/gpio-xtensa.c b/drivers/gpio/gpio-xtensa.c
>
> [snip]
>
> > +static int __init xtensa_gpio_init(void)
> > +{
> > + struct platform_device *pdev;
> > +
> > + pdev = platform_device_register_simple("xtensa-gpio", 0, NULL, 0);
>
> Is it what you really want to do? It means this driver will probe
> regardless it really should or not.
If you have XCHAL_CP_ID_XTIOP defined in your xtensa variant tie.h header,
then this device is available. Otherwise, this driver doesn't even build. If
you don't want the kernel to manage the GPIO32 IO port, then just disable the
driver in the kernel configuration.
Does this sound reasonable enough?
baruch
> > + if (IS_ERR(pdev))
> > + return PTR_ERR(pdev);
> > +
> > + return platform_driver_register(&xtensa_gpio_driver);
> > +}
> > +device_initcall(xtensa_gpio_init);
> > +
> > +MODULE_AUTHOR("Baruch Siach <[email protected]>");
> > +MODULE_DESCRIPTION("Xtensa LX4 GPIO32 driver");
> > +MODULE_LICENSE("GPL");
--
http://baruch.siach.name/blog/ ~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- [email protected] - tel: +972.2.679.5364, http://www.tkos.co.il -
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
