The GPIO_CONTROL macro returns the control register offset when given a GPIO number.
Update the argument name in the macro to reflect that it takes in a GPIO number and not a bank. Signed-off-by: Markus Mayer <[email protected]> Reviewed-by: Tim Kryger <[email protected]> --- drivers/gpio/gpio-bcm-kona.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-bcm-kona.c b/drivers/gpio/gpio-bcm-kona.c index 233d088..93a5b01 100644 --- a/drivers/gpio/gpio-bcm-kona.c +++ b/drivers/gpio/gpio-bcm-kona.c @@ -28,6 +28,10 @@ #define GPIO_BANK(gpio) ((gpio) >> 5) #define GPIO_BIT(gpio) ((gpio) & (GPIO_PER_BANK - 1)) +/* There is a GPIO control register for each GPIO */ +#define GPIO_CONTROL(gpio) (0x00000100 + ((gpio) << 2)) + +/* The remaining registers are per GPIO bank */ #define GPIO_OUT_STATUS(bank) (0x00000000 + ((bank) << 2)) #define GPIO_IN_STATUS(bank) (0x00000020 + ((bank) << 2)) #define GPIO_OUT_SET(bank) (0x00000040 + ((bank) << 2)) @@ -35,7 +39,6 @@ #define GPIO_INT_STATUS(bank) (0x00000080 + ((bank) << 2)) #define GPIO_INT_MASK(bank) (0x000000a0 + ((bank) << 2)) #define GPIO_INT_MSKCLR(bank) (0x000000c0 + ((bank) << 2)) -#define GPIO_CONTROL(bank) (0x00000100 + ((bank) << 2)) #define GPIO_PWD_STATUS(bank) (0x00000500 + ((bank) << 2)) #define GPIO_GPPWR_OFFSET 0x00000520 -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
