On 11/12/2015 11:33 AM, Felipe Balbi wrote:
Hi,
Grygorii Strashko <grygorii.stras...@ti.com> writes:
On 11/12/2015 08:09 PM, Felipe Balbi wrote:
Hi,
Grygorii Strashko <grygorii.stras...@ti.com> writes:
On 11/12/2015 07:50 PM, Felipe Balbi wrote:
According to TRM, debounce is measured in periods of
the functional clock of the GPIO IP. This means that
What TRM? link pls.
http://www.ti.com/lit/ug/spruhl7d/spruhl7d.pdf
28.4.1.24 GPIO_DEBOUNCINGTIME Register (offset = 154h) [reset = 0h]
The GPIO_DEBOUNCINGTIME register controls debouncing time (the value is
global for all ports). The debouncing cell is running with the
debouncing clock (32 kHz), this register represents the number of the
clock cycle(s) (31 s long) to be used.
Debouncing Value in 31 microsecond steps.
Debouncing Value = (DEBOUNCETIME + 1) * 31 microseconds.
DRA7xx:
"
8-bit values specifying the debouncing time. It is n-
periods of the muxed clock, which can come from either
a true 32k oscillator/pad of from the system clock. It
depends on which boot mode is selected. For more
information see Chapter 32, Initialization.
"
See
http://www.ti.com/lit/ug/spruhz6d/spruhz6d.pdf
27.4.3 General-Purpose Interface Clock Configuration
27.4.3.1 Clocking
This completely unclear. Sry, I think this patch can't be used as is,
first of all because of backward compatibility issues.
yeah, might be. No issues, I'll just go dig older TRMs and trying to
figure this one out. Meanwhile, let's let's keep it as is.
Just to be clear, being a common GPIO driver, it can't break
backward compatibility. So NAK for current patch.
If needed, please setup different debounce functions based
on GPIO IP numbers if it makes is efficient/accurate.
Regards,
Santosh
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html