Pins that (1) can be configured as either GPIO or a single peripheral
function, and (2) that don't need configuration in an IPSRx register,
should still be listed in the pinmux_data[] array.
Else selecting the peripheral function fails with e.g.:
sh-pfc e6060000.pfc: cannot locate data/mark enum_id for mark 1281
(mark 1281 is MSIOF0_SCK_MARK).
Signed-off-by: Geert Uytterhoeven <[email protected]>
---
This depends on "pinctrl: sh-pfc: Add PINMUX_SINGLE()".
v2:
- Use PINMUX_SINGLE() instead of raw PINMUX_DATA().
---
drivers/pinctrl/sh-pfc/pfc-r8a7795.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
b/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
index 678c3801e999453c..e9dafe3d3320eb9f 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
@@ -580,6 +580,25 @@ enum {
static const u16 pinmux_data[] = {
PINMUX_DATA_GP_ALL(),
+ PINMUX_SINGLE(AVS1),
+ PINMUX_SINGLE(AVS2),
+ PINMUX_SINGLE(HDMI0_CEC),
+ PINMUX_SINGLE(HDMI1_CEC),
+ PINMUX_SINGLE(MSIOF0_RXD),
+ PINMUX_SINGLE(MSIOF0_SCK),
+ PINMUX_SINGLE(MSIOF0_TXD),
+ PINMUX_SINGLE(SD2_CMD),
+ PINMUX_SINGLE(SD3_CLK),
+ PINMUX_SINGLE(SD3_CMD),
+ PINMUX_SINGLE(SD3_DAT0),
+ PINMUX_SINGLE(SD3_DAT1),
+ PINMUX_SINGLE(SD3_DAT2),
+ PINMUX_SINGLE(SD3_DAT3),
+ PINMUX_SINGLE(SD3_DS),
+ PINMUX_SINGLE(SSI_SCK5),
+ PINMUX_SINGLE(SSI_SDATA5),
+ PINMUX_SINGLE(SSI_WS5),
+
/* IPSR0 */
PINMUX_IPSR_GPSR(IP0_3_0, AVB_MDC),
PINMUX_IPSR_MSEL(IP0_3_0, MSIOF2_SS2_C, SEL_MSIOF2_2),
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
