Hello Maxime,
On Sat, Dec 19, 2015 at 5:41 AM, Maxime Ripard <maxime.rip...@free-electrons.com> wrote: > Hi, > > On Fri, Dec 18, 2015 at 09:30:50PM +0800, Vishnu Patekar wrote: >> Allwinner A83T is new octa-core cortex-a7 SOC. >> This adds the basic dtsi, the clocks differs from >> earlier sun8i SOCs. >> >> Signed-off-by: Vishnu Patekar <vishnupatekar0...@gmail.com> >> --- >> arch/arm/boot/dts/sun8i-a83t.dtsi | 206 >> ++++++++++++++++++++++++++++++++++++++ >> 1 file changed, 206 insertions(+) >> create mode 100644 arch/arm/boot/dts/sun8i-a83t.dtsi >> >> diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi >> b/arch/arm/boot/dts/sun8i-a83t.dtsi >> new file mode 100644 >> index 0000000..e577c64 >> --- /dev/null >> +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi >> @@ -0,0 +1,206 @@ >> +/* >> + * Copyright 2015 Vishnu Patekar >> + * >> + * Vishnu Patekar <vishnupatekar0...@gmail.com> >> + * >> + * This file is dual-licensed: you can use it either under the terms >> + * of the GPL or the X11 license, at your option. Note that this dual >> + * licensing only applies to this file, and not this project as a >> + * whole. >> + * >> + * a) This file is free software; you can redistribute it and/or >> + * modify it under the terms of the GNU General Public License as >> + * published by the Free Software Foundation; either version 2 of the >> + * License, or (at your option) any later version. >> + * >> + * This file is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + * >> + * Or, alternatively, >> + * >> + * b) Permission is hereby granted, free of charge, to any person >> + * obtaining a copy of this software and associated documentation >> + * files (the "Software"), to deal in the Software without >> + * restriction, including without limitation the rights to use, >> + * copy, modify, merge, publish, distribute, sublicense, and/or >> + * sell copies of the Software, and to permit persons to whom the >> + * Software is furnished to do so, subject to the following >> + * conditions: >> + * >> + * The above copyright notice and this permission notice shall be >> + * included in all copies or substantial portions of the Software. >> + * >> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, >> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES >> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND >> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT >> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, >> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING >> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR >> + * OTHER DEALINGS IN THE SOFTWARE. >> + >> + */ >> + >> +#include "skeleton.dtsi" >> + >> +#include <dt-bindings/interrupt-controller/arm-gic.h> >> + >> +#include <dt-bindings/pinctrl/sun4i-a10.h> >> + >> +/ { >> + interrupt-parent = <&gic>; >> + >> + chosen { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges; >> + }; >> + >> + cpus { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + cpu@0 { >> + compatible = "arm,cortex-a7"; >> + device_type = "cpu"; >> + reg = <0>; >> + }; >> + >> + cpu@1 { >> + compatible = "arm,cortex-a7"; >> + device_type = "cpu"; >> + reg = <1>; >> + }; >> + >> + cpu@2 { >> + compatible = "arm,cortex-a7"; >> + device_type = "cpu"; >> + reg = <2>; >> + }; >> + >> + cpu@3 { >> + compatible = "arm,cortex-a7"; >> + device_type = "cpu"; >> + reg = <3>; >> + }; > > A \n here please > >> + cpu@100 { >> + compatible = "arm,cortex-a7"; >> + device_type = "cpu"; >> + reg = <0x100>; >> + }; >> + >> + cpu@101 { >> + compatible = "arm,cortex-a7"; >> + device_type = "cpu"; >> + reg = <0x101>; >> + }; > > Ditto. > >> + cpu@102 { >> + compatible = "arm,cortex-a7"; >> + device_type = "cpu"; >> + reg = <0x102>; >> + }; >> + >> + cpu@103 { >> + compatible = "arm,cortex-a7"; >> + device_type = "cpu"; >> + reg = <0x103>; >> + }; >> + }; >> + >> + memory { >> + reg = <0x40000000 0x80000000>; >> + }; > > Is mainline u-boot usable ? If so, you can remove that node entirely. Yes, it is usable now. :) > >> + >> + timer { >> + compatible = "arm,armv7-timer"; >> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | >> IRQ_TYPE_LEVEL_LOW)>, >> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | >> IRQ_TYPE_LEVEL_LOW)>, >> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | >> IRQ_TYPE_LEVEL_LOW)>, >> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | >> IRQ_TYPE_LEVEL_LOW)>; >> + }; >> + >> + clocks { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges; >> + >> + osc24M: osc24M_clk { >> + #clock-cells = <0>; >> + compatible = "fixed-clock"; >> + clock-frequency = <24000000>; >> + clock-output-names = "osc24M"; >> + }; >> + >> + osc32k: osc32k_clk { >> + #clock-cells = <0>; >> + compatible = "fixed-clock"; >> + clock-frequency = <32768>; >> + clock-output-names = "osc32k"; >> + }; > > Do you need to modify the clocks driver in your first commit then? I did not get what you are trying to say here, could you please elaborate? I'll correct mistakes, and re-send this patch, is it okie? > >> + }; >> + >> + soc { >> + compatible = "simple-bus"; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges; >> + >> + gic: interrupt-controller@01c81000 { >> + compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; >> + reg = <0x01c81000 0x1000>, >> + <0x01c82000 0x1000>, >> + <0x01c84000 0x2000>, >> + <0x01c86000 0x2000>; > > Please order the nodes by ascending physical addresses. > >> + interrupt-controller; >> + #interrupt-cells = <3>; >> + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | >> IRQ_TYPE_LEVEL_HIGH)>; >> + }; >> + >> + pio: pinctrl@01c20800 { >> + compatible = "allwinner,sun8i-a83t-pinctrl"; >> + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, >> + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, >> + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; >> + reg = <0x01c20800 0x400>; >> + clocks = <&osc24M>; >> + gpio-controller; >> + interrupt-controller; >> + #interrupt-cells = <3>; >> + #gpio-cells = <3>; >> + >> + mmc0_pins_a: mmc0@0 { >> + allwinner,pins = "PF0", "PF1", "PF2", >> + "PF3", "PF4", "PF5"; >> + allwinner,function = "mmc0"; >> + allwinner,drive = <SUN4I_PINCTRL_30_MA>; >> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; >> + }; >> + >> + uart0_pins_a: uart0@0 { >> + allwinner,pins = "PF2", "PF4"; >> + allwinner,function = "uart0"; >> + allwinner,drive = <SUN4I_PINCTRL_10_MA>; >> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; >> + }; >> + >> + uart0_pins_b: uart0@1 { >> + allwinner,pins = "PB9", "PB10"; >> + allwinner,function = "uart0"; >> + allwinner,drive = <SUN4I_PINCTRL_10_MA>; >> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; >> + }; >> + }; >> + >> + uart0: serial@01c28000 { >> + compatible = "snps,dw-apb-uart"; >> + reg = <0x01c28000 0x400>; >> + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; >> + reg-shift = <2>; >> + reg-io-width = <4>; >> + clocks = <&osc24M>; >> + status = "disabled"; >> + }; >> + }; >> +}; > > Thanks! > Maxime > > -- > Maxime Ripard, Free Electrons > Embedded Linux, Kernel and Android engineering > http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html