hi, i have a cluster with an internal ip address and several clustered public service ips. e.g.
> interface ip address > eth0 192.168.1.100/24 = internal management/cluster ip > eth0.12 a.b.c.d/24 = service ip to make the public ip reachable, i use: > /sbin/ip rule add from a.b.c.0/24 table 12 > /sbin/ip route add default dev eth0 via a.b.c.1 table 12 if i issue this by hand, it works perfectly fine. right now, i'm using something like this for the second part: > primitive dbiproute ocf:heartbeat:Route \ > params device="eth0.1112" gateway="93.189.24.193" table="12" > destination="default" \ > op monitor interval="10" what i'm thinking about: 1. issue "/sbin/ip rule add from a.b.c.0/24 table 12" upon reboot/firewall setup (my current solution); or 2. create ocf:heartbeat:Iprule - similar to ocf:heartbeat:Route; or 3. adapt ocf:heartbeat:Route to handle the rule. what would you guys do? cheers, raoul -- ____________________________________________________________________ DI (FH) Raoul Bhatia M.Sc. email. r.bha...@ipax.at Technischer Leiter IPAX - Aloy Bhatia Hava OG web. http://www.ipax.at Barawitzkagasse 10/2/2/11 email. off...@ipax.at 1190 Wien tel. +43 1 3670030 FN 277995t HG Wien fax. +43 1 3670030 15 ____________________________________________________________________ _______________________________________________________ Linux-HA-Dev: Linux-HA-Dev@lists.linux-ha.org http://lists.linux-ha.org/mailman/listinfo/linux-ha-dev Home Page: http://linux-ha.org/
