On 5/22/07, Tao Yu <[EMAIL PROTECTED]> wrote:
I am using heartbeat 2.0.8.
Two scenarios:
1. start heartbeat with no resource defined in cib.xml. Then try to add
an empty group by sending message
"add_grp
group_1"
The response message never comes back.
In this case, the cib.xml is like the following:
<cib>
<configuration>
<crm_config>
<cluster_property_set id="cib-bootstrap-options">
<attributes>
<nvpair
id="cib-bootstrap-options-default-resource-failure-stickiness"
name="default-resource-failure-stickiness" value="INFINITY"/>
<nvpair id="cib-bootstrap-options-default-resource-stickiness"
name="default-resource-stickiness" value="INFINITY"/>
<nvpair id="cib-bootstrap-options-last-lrm-refresh"
name="last-lrm-refresh" value="1179778632"/>
</attributes>
</cluster_property_set>
</crm_config>
<nodes/>
<resources/>
<constraints/>
</configuration>
</cib>
2. Start heartbeat with some resource defined in the group, like an
IPaddr, delete the IPaddr resource and then add the IPaddr resource again by
sending msg to mgmtd
"add_rsc
ipaddr_192_168_0_108
ocf
IPaddr
heartbeat
group_1
noclone
0
0
nomaster
0
0
ip_param_1
ip
192.168.0.108"
The response message never comes back.
Looks in both cases, heartbeat is in some funny state.
Is this a bug or there are some ground-rules need to be followed?
logs?
_______________________________________________
Linux-HA mailing list
Linux-HA@lists.linux-ha.org
http://lists.linux-ha.org/mailman/listinfo/linux-ha
See also: http://linux-ha.org/ReportingProblems