Hi all,
This is not strictly related to heartbeat, but it seems a place to
start, since someone has almost certainly done this. Please feel
free to direct me to a more appropriate resource if needed.
I am follow the setup at the page below, with the idea being to make
a heartbeat/drbd driven SAN system with failover capability. This
specifically says to set the lun in the iscsi target to /dev/drbd2.
http://www.pcpro.co.uk/realworld/82284/san-on-the-cheap/page3.html
When I set up the iscsi target lun to /dev/drbd2, as given in the
above page, the following error is logged:
ietd: Can't create a logical unit 30 1 0 Path=/dev/drbd2,Type=fileio
Is the /dev/drbdN device required, or can the lun share the
underlying physical device? google isn't turning up much in the way
of specific answers that I've found so far. Thanks...
-- Michael
_______________________________________________
Linux-HA mailing list
[email protected]
http://lists.linux-ha.org/mailman/listinfo/linux-ha
See also: http://linux-ha.org/ReportingProblems
