Hi, On Tue, Sep 16, 2008 at 10:36:44AM +0200, Wayne Gemmell wrote: > Hi all > > I'm running 2.1.3 on Ubuntu hardy. My ha.cf looks like below. This is the > first time I'm using unicast connections and so far there is wierdness going > on. shutdown by ipmi because of high ambient temp. They've been having aircon > > problems in our hosting center and when the ambient temp gets to around 38 > deg C my passive server shuts down (No I don't know how to stop this from > happening.)
I suppose that it shuts down for a good reason. > The active server then follows suite and gives up all its > resources. Follows suite as in it gets shutdown by the ipmi device? If so, then one can't do much about it. > This happened again at 2am this morning and I really need to get > to the bottom of this. I'm trying broadcast coms to see if it makes a > difference but I though I'd post here for ideas. There's no good reason for that change to make any difference. Otherwise, in a two-node cluster, if only one node is running it should run the resources. The answer is hopefully in the logs. Thanks, Dejan > udpport 694 > ucast eth5 10.40.0.1 > ucast eth5 10.40.0.2 > debug 1 > use_logd on > keepalive 2 > warntime 15 > deadtime 30 > initdead 45 > auto_failback off > node nikki > node asia > crm off > > -- > Regards > Wayne > _______________________________________________ > Linux-HA mailing list > [email protected] > http://lists.linux-ha.org/mailman/listinfo/linux-ha > See also: http://linux-ha.org/ReportingProblems _______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
