>>> Dejan Muhamedagic <de...@suse.de> schrieb am 05.08.2011 um 08:39 in >>> Nachricht <20110805063900.GB31749@rondo.homenet>: > Hi, > > On Fri, Aug 05, 2011 at 08:23:43AM +0200, Ulrich Windl wrote: > > >>> Dejan Muhamedagic <de...@suse.de> schrieb am 04.08.2011 um 18:32 in > Nachricht > > <20110804163245.GA28585@rondo.homenet>: > > > Hi, > > > > > > On Thu, Aug 04, 2011 at 05:45:16PM +0200, Ulrich Windl wrote: > > > > Hi! > > > > > > > > Some RAs support OCF_CHECK_LEVEL (e.g. ocf:heartbeat:Raid1). However > > > > the > > > OCF_CHECK_LEVEL is not advertised in the metadata. Also, OCF_CHECK_LEVEL > is > > > not a global parameter (wouldn't make much sense). > > > > > > > > So obviously using the crm_gui one can add OCF_CHECK_LEVEL for some > > > resource, and that seems to work. > > > > > > > > So far, so good. Now I tried to add more resources without an > > > OCF_CHECK_LEVEL using the crm command line. I added the new resources to > > > a > > > > group that contained resources using OCF_CHECK_LEVEL. > > > > > > OCF_CHECK_LEVEL is to be defined on a per-monitor basis, like > > > this: > > > > > > primitive ... > > > op monitor OCF_CHECK_LEVEL=10 interval=... > > > > [...] > > > > So, is a configuration like the following incorrect? > > > > primitive prm_c11_as_1_raid1 ocf:heartbeat:Raid1 \ > > params raidconf="/etc/mdadm/mdadm.conf" raiddev="/dev/md15" > OCF_CHECK_LEVEL="1" \ > > operations $id="prm_c11_as_1_raid1-operations" \ > > op start interval="0" timeout="20s" \ > > op stop interval="0" timeout="20s" \ > > op monitor interval="60" timeout="60s" > > Yes. See an example here: > > http://www.clusterlabs.org/doc/en-US/Pacemaker/1.1/html/Pacemaker_Explained/s- > > operation-monitor-multiple.html > > Though it's XML, you can see that OCF_CHECK_LEVEL is defined > within a monitor operation.
Amazingly "crm_verify -LV" does not report any problem however. Regards, Ulrich _______________________________________________ Linux-HA mailing list Linux-HA@lists.linux-ha.org http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems