Well, with 6.4 and 6.5 (which I like a lot) there is this specific
situation - no more crm, only pcs and ccs, but on the other hand, stack
with cman (which is being replaced by corosync 2.0 now). So the
documentation found on various sites is rarely handy...

2014-10-20 22:17 GMT+02:00 John Scalia <jayknowsu...@gmail.com>:

> Thanks, but on centOS are you saying to use "pcs cluster start" rather
> than using "service cman start" and "service pacemaker start"? I was just
> going by the tutorial, which doesn't mention this.
>
>
> On 10/20/2014 3:44 PM, Maciej Rostański wrote:
>
>> Hello,
>>
>> In my experience such problems were the effect of my mistakes, such as not
>> having all hosts in /etc/hosts file. Check this, please, I know it sounds
>> simple.
>>
>> Also, commands:
>> pcs cluster setup --name clustername node1 node2 node3
>> pcs cluster enable
>> pcs cluster start
>>
>> are much more pleasant to run than ccs method you use, and they work on
>> Centos6.5
>>
>> Regards,
>> Maciej
>>
>>
>>
>> 2014-10-20 20:50 GMT+02:00 John Scalia <jayknowsu...@gmail.com>:
>>
>>  Hi all,
>>>
>>> I'm trying to build my first ever HA cluster and I'm using 3 VMs running
>>> CentOS 6.5. I followed the instructions to the letter at:
>>>
>>> http://clusterlabs.org/quickstart-redhat.html
>>>
>>> and everything appears to start normally, but if I run "cman_tool nodes
>>> -a", I only see:
>>>
>>> Node     Sts    Inc          Joined Name
>>>          1      M     64         2014-10--20 14:00:00  csgha1
>>>                  Addresses: 10.10.1.128
>>>          2      X 0
>>> csgha2
>>>          3      X 0
>>> csgha3
>>>
>>> In the other systems, the output is the same except for which system is
>>> shown as joined. Each shows just itself as belonging to the cluster.
>>> Also,
>>> "pcs status" reflects similarly with non-self systems showing offline.
>>> I've
>>> checked "netstat -an" and see each machine listening on ports 5405 and
>>> 5405. And the logs are rather involved, but I'm not seeing errors in it.
>>>
>>> Any ideas for where to look for what's causing them to not communicate?
>>> --
>>> Jay
>>> _______________________________________________
>>> Linux-HA mailing list
>>> Linux-HA@lists.linux-ha.org
>>> http://lists.linux-ha.org/mailman/listinfo/linux-ha
>>> See also: http://linux-ha.org/ReportingProblems
>>>
>>>
>>
>>
> _______________________________________________
> Linux-HA mailing list
> Linux-HA@lists.linux-ha.org
> http://lists.linux-ha.org/mailman/listinfo/linux-ha
> See also: http://linux-ha.org/ReportingProblems
>



-- 
Maciej Rostanski
mrostan...@gmail.com
http://mrdean.wordpress.com
_______________________________________________
Linux-HA mailing list
Linux-HA@lists.linux-ha.org
http://lists.linux-ha.org/mailman/listinfo/linux-ha
See also: http://linux-ha.org/ReportingProblems

Reply via email to