According to Julian =?ISO-8859-1?Q?Mu=F1oz?= =?ISO-8859-1?Q?Dom=EDnguez?=: While
burning my CPU.
>
>
> If the t2 timer expired before sending the I packet, the RR would be before it,
> not after.
>
> I don't find any explanation. This happens sometimes. t2 is 15 (1,5 seg), at
> 1200 bauds.
>
> That is the trace from the sending station. The receiving is similar.
>
>
> [Tue Feb 2 15:18:49 1999]
> Port 1200: AX25: EA4ACL-3->EA4RCT-5 <I C S3 R6> pid=IP
> IP: len 40 44.133.228.17->44.133.228.65 ihl 20 ttl 64 tos 16 DF prot TCP
> TCP: 1104->telnet Seq xef971775 Ack x6603247b ACK Wnd 4320
>
> [Tue Feb 2 15:18:49 1999]
> Port 1200: AX25: EA4RCT-5->EA4ACL-3 <I C S6 R4> First seg; remain 1 pid=IP
> IP: len 132 44.133.228.65->44.133.228.17 ihl 20 ttl 64 tos 16 DF prot TCP
> TCP: telnet->1104 Seq x6603247b Ack xef971775 ACK PSH Wnd 4320 Data 88
> 0000 s..login.gz.. moni_rct..moni_2_rct.. textos_periodicos_listas.
> 0040 .[julian@gateradio julia
>
> [Tue Feb 2 15:18:49 1999]
> Port 1200: AX25: EA4RCT-5->EA4ACL-3 <I C S7 R4> remain 0
> 0000 n]$
>
> [Tue Feb 2 15:18:50 1999]
> Port 1200: AX25: EA4RCT-5->EA4ACL-3 <RR R R4>
>
Firstly one would imagen a t_2 timer time of 1.5 seconds far to short for a
1k2 link.
Seconly it looks like you are using mode VC,
thirdly you have not set the "window" or "mss/mtu" correctly with the
available commands. that can be seen because you are experiencing packet
fragmenation, which is realy a bad thing on radio links.
I am possably quite wrong here, however i would try the following;
Attach the interface with a MTU of 256
add routes with the route command and set the window to 944 mss 256 and irtt
to 6000
I would certanly try changing t2 to 60 to start with and see what happens.
I dont mode datagram and have never seen this type of thing happen.
I would expect someone else will be able to tell you exachtly what you are
doing wrong.
>
>
> --
> Saludos de Julián
> -.-
> >> Powered by KDE / Linux <<
>
--
Regards Richard.
[EMAIL PROTECTED]
