On Sun, 20 Jun 1999, Paul wrote:
> > I did double check I can see the outgoing packets in listen, but nothing
> > happens in the tnc. I know I'm missing something simple between
> > mkiss/kissattach and the tnc. This is on a RH5.2 system. Back to digging in
> > the docs...
>
> Is the TNC set to the correct terminal baud rate? TNC and serial port
> must be "talking" to each other at the same speed.
Remember that the baudrate in /etc/ax25/axports is the serial baudrate,
not the radio speed. That's a quite common mistake, I've done it couple of
times too...
--
Tomi Manninen Internet: [EMAIL PROTECTED]
OH2BNS AX.25: [EMAIL PROTECTED]
KP20ME Amprnet: [EMAIL PROTECTED]
