Hi!
In the dir /sbin/init.d/rc2.d you find a file starting whith @S..serial.
Edit this and use the autoconfig and auto_irq. This works for me.
I need the latest ax25tolls and stuff for SuSE 6.1. Do you have it or
where can i find it?
73 de SM7TIX / Stefan
Mike Bondarev wrote:
>
> Hello, SuSE experts!
> I'm instold SuSE 6.2 few days ago and now trying to set up AX25-utils. I'll
> try to explane my problems.
> First of all, I have 4 COM-ports on my PC with IRQ's 5 and 9 for COM3 and
> COM4.
> After installing SuSE, compiling a new kernel and installing the latest
> AX25-stuff (libax25-0.0.7
> tools-0.0.5 and apps-0.0.4) I was cheking ttys* devices with setserial -g
> /dev/ttys2 and I always got the message "I/O error". The same with
> kissattach: open: Input/output error. My TNC (kissmode) is connected to
> COM3, so I have to remove /dev/ttys2 and create it manualy with
> mknod -m 660 /dev/ttys2 c 4 66 and
> chown root.tty /dev/ttys2
> Also I was edit *serial for proper IRQ and UART.
> Then I was able to make kissattach, BUT "listen" and "call" was not working.
> Also I realised, that during booting linux threre was no messages concerning
> AX25 and kiss.
> Then I inserted kissattach string to /sbin/init.d/boot.local
> After that i got the following during startup of linux :
>
> unning /sbin/init.d/boot.local
> Serial driver version 4.27 with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ enabled
> ttyS00 at 0x03f8 (irq = 4) is a 16450
> ttyS01 at 0x02f8 (irq = 3) is a 16450
> ttyS02 at 0x03e8 (irq = 4) is a TI16750
> ttyS03 at 0x02e8 (irq = 3) is a TI16750
> NET4: G4KLX/GW4PTS AX.25 for Linux. Version 0.37 for Linux NET4.0
> AX.25 Multikiss device enabled
> AX.25 port kiss bound to device ax0 done
> Creating /var/log/boot.msg done
> Disabling IP forwarding done
> Loading memstat module done
> INIT: Entering runlevel: 2
> Master Resource Control: previous runlevel: N, switching to runlevel: 2
> Configuring serial ports
> Cannot set serial info: Device or resource busy
> ttyS0 at 0x03f8 (irq = 4) is a 16450
> ttyS1 at 0x02f8 (irq = 3) is a 16450
> ttyS2 at 0x03e8 (irq = 4) is a 16750 ## this is wrong! must be IRQ 5 and
> UART 16550A
> ttyS3 at 0x02e8 (irq = 2) is a 16550A failed
> Setting up network device eth0
>
> I wonder, where is this "Serial driver version 4.27 with HUB-6" from ??? I
> don't use it!
> Why "Cannot set serial info: Device or resource busy" ??? What I'm doing
> wrong?
> I don't have such problems with SuSE 5.3
> Sorry for my English.
>
> 73! Mike UA6LU
> http://www.ua6lu.org
