On 12/12/2023 17:40, Ninad Palsule wrote:
> This drop adds following devices in the device tree.
> - EEPROM/VPD
> - Power supplies
> - Humidity, pressure and temperature sensors.
> - Trusted platform module(TPM) chip
>
> Tested:
> This board is tested using the simics simulator.
>
> Signed-off-by: Ninad Palsule <[email protected]>
> ---
Don't mix DTS with drivers. DTS and drivers go via different subsystems
and cannot have dependencies, so why DTS is patch #6, then driver #7 and
now again DTS #7?
> .../dts/aspeed/aspeed-bmc-ibm-system1.dts | 76 +++++++++++++++++++
> 1 file changed, 76 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
> b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
> index 75562aa63701..d960b938fe8d 100644
> --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
> @@ -461,6 +461,11 @@ &kcs3 {
> &i2c0 {
> status = "okay";
>
> + eeprom@50 {
> + compatible = "atmel,24c64";
> + reg = <0x50>;
> + };
> +
> regulator@60 {
> compatible = "maxim,max8952";
> reg = <0x60>;
> @@ -655,6 +660,25 @@ pca0: pca9539@74 {
>
> &i2c2 {
> status = "okay";
> +
> + power-supply@58 {
> + compatible = "ibm,cffps";
> + reg = <0x58>;
> + };
> +
> + power-supply@59 {
> + compatible = "ibm,cffps";
> + reg = <0x59>;
> + };
> +
> + power-supply@5a {
> + compatible = "ibm,cffps";
> + reg = <0x5a>;
> + };
Missing blank line
> + power-supply@5b {
> + compatible = "ibm,cffps";
> + reg = <0x5b>;
> + };
Best regards,
Krzysztof
