Add AIM300 AIoT Carrier board DTS support, including usb, UART, PCIe,
I2C functions support.
Here is a diagram of AIM300 AIoT Carrie Board and SoM
+--------------------------------------------------+
| AIM300 AIOT Carrie Board |
| |
| +-----------------+ |
|power----->| Fixed regulator |---------+ |
| +-----------------+ | |
| | |
| v VPH_PWR |
| +----------------------------------------------+ |
| | AIM300 SOM | | |
| | |VPH_PWR | |
| | v | |
| | +-------+ +--------+ +------+ | |
| | | UFS | | QCS8550| |PMIC | | |
| | +-------+ +--------+ +------+ | |
| | | |
| +----------------------------------------------+ |
| |
| +----+ +------+ |
| |USB | | UART | |
| +----+ +------+ |
+--------------------------------------------------+
Co-developed-by: Qiang Yu <quic_qia...@quicinc.com>
Signed-off-by: Qiang Yu <quic_qia...@quicinc.com>
Co-developed-by: Ziyue Zhang <quic_ziyuz...@quicinc.com>
Signed-off-by: Ziyue Zhang <quic_ziyuz...@quicinc.com>
Signed-off-by: Tengfei Fan <quic_teng...@quicinc.com>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../boot/dts/qcom/qcs8550-aim300-aiot.dts | 384 ++++++++++++++++++
2 files changed, 385 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile
b/arch/arm64/boot/dts/qcom/Makefile
index 7d40ec5e7d21..02d9bc3bfce7 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -96,6 +96,7 @@ dtb-$(CONFIG_ARCH_QCOM) += qcm6490-idp.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2.dtb
+dtb-$(CONFIG_ARCH_QCOM) += qcs8550-aim300-aiot.dtb
dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb
dtb-$(CONFIG_ARCH_QCOM) += qrb2210-rb1.dtb
dtb-$(CONFIG_ARCH_QCOM) += qrb4210-rb2.dtb
diff --git a/arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts
b/arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts
new file mode 100644
index 000000000000..8188766c3d84
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts
@@ -0,0 +1,384 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights
reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "qcs8550-aim300.dtsi"
+#include "pm8010.dtsi"
+#include "pmr735d_a.dtsi"
+#include "pmr735d_b.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. QCS8550 AIM300 AIOT";
+ compatible = "qcom,qcs8550-aim300-aiot", "qcom,qcs8550-aim300",
"qcom,qcs8550",
+ "qcom,sm8550";
+
+ aliases {
+ serial0 = &uart7;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&volume_up_n>;
+ pinctrl-names = "default";
+
+ key-volume-up {
+ label = "Volume Up";
+ debounce-interval = <15>;
+ gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ linux,can-disable;
+ wakeup-source;
+ };
+ };
+
+ pmic-glink {
+ compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
+
+ connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_hs_in: endpoint {
+ remote-endpoint =
<&usb_1_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_ss_in: endpoint {
+ remote-endpoint =
<&redriver_ss_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_sbu: endpoint {
+ remote-endpoint =
<&fsa4480_sbu_mux>;
+ };
+ };
+ };
+ };
+ };
+
+ vph_pwr: regulator-vph-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ vdd-bob1-supply = <&vph_pwr>;
+ vdd-bob2-supply = <&vph_pwr>;
+ };
+
+ regulators-3 {
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ };
+
+ regulators-4 {
+ vdd-s4-supply = <&vph_pwr>;
+ };
+
+ regulators-5 {
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ };
+};
+
+&i2c_hub_2 {
+ status = "okay";
+
+ typec-mux@42 {
+ compatible = "fcs,fsa4480";
+ reg = <0x42>;
+
+ vcc-supply = <&vreg_bob1>;
+
+ mode-switch;
+ orientation-switch;
+
+ port {
+ fsa4480_sbu_mux: endpoint {
+ remote-endpoint = <&pmic_glink_sbu>;
+ };
+ };
+ };
+
+ typec-retimer@1c {
+ compatible = "onnn,nb7vpq904m";
+ reg = <0x1c>;
+
+ vcc-supply = <&vreg_l15b_1p8>;
+
+ orientation-switch;
+ retimer-switch;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ redriver_ss_out: endpoint {
+ remote-endpoint = <&pmic_glink_ss_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ redriver_ss_in: endpoint {
+ data-lanes = <3 2 1 0>;
+ remote-endpoint = <&usb_dp_qmpphy_out>;
+ };
+ };
+ };
+ };
+};
+
+&mdss_dsi0 {
+ vdda-supply = <&vreg_l3e_1p2>;
+ status = "okay";
+
+ panel@0 {
+ compatible = "visionox,vtdr6130";
+ reg = <0>;
+
+ pinctrl-0 = <&dsi_active>, <&te_active>;
+ pinctrl-1 = <&dsi_suspend>, <&te_suspend>;
+ pinctrl-names = "default", "sleep";
+
+ reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+ vci-supply = <&vreg_l13b_3p0>;
+ vdd-supply = <&vreg_l11b_1p2>;
+ vddio-supply = <&vreg_l12b_1p8>;
+
+ port {
+ panel0_in: endpoint {
+ remote-endpoint = <&mdss_dsi0_out>;
+ };
+ };
+ };
+};
+
+&mdss_dsi0_out {
+ remote-endpoint = <&panel0_in>;
+ data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+ vdds-supply = <&vreg_l1e_0p88>;
+ status = "okay";
+};
+
+&pcie0 {
+ perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&pcie0_default_state>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie0_phy {
+ vdda-phy-supply = <&vreg_l1e_0p88>;
+ vdda-pll-supply = <&vreg_l3e_1p2>;
+
+ status = "okay";
+};
+
+&pcie_1_phy_aux_clk {
+ clock-frequency = <1000>;
+};
+
+&pcie1 {
+ perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&pcie1_default_state>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie1_phy {
+ vdda-phy-supply = <&vreg_l3c_0p9>;
+ vdda-pll-supply = <&vreg_l3e_1p2>;
+ vdda-qref-supply = <&vreg_l1e_0p88>;
+
+ status = "okay";
+};
+
+&pm8550_gpios {
+ volume_up_n: volume-up-n-state {
+ pins = "gpio6";
+ function = "normal";
+ power-source = <1>;
+ bias-pull-up;
+ input-enable;
+ };
+};
+
+&pm8550b_eusb2_repeater {
+ vdd18-supply = <&vreg_l15b_1p8>;
+ vdd3-supply = <&vreg_l5b_3p1>;
+};
+
+
+&pon_pwrkey {
+ status = "okay";
+};
+
+&pon_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+
+ status = "okay";
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/qcs8550/adsp.mbn",
+ "qcom/qcs8550/adsp_dtbs.elf";
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/qcs8550/cdsp.mbn",
+ "qcom/qcs8550/cdsp_dtbs.elf";
+ status = "okay";
+};
+
+&sleep_clk {
+ clock-frequency = <32000>;
+};
+
+&swr1 {
+ status = "okay";
+};
+
+&swr2 {
+ status = "okay";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <32 8>;
+
+ dsi_active: dsi-active-state {
+ pins = "gpio133";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ dsi_suspend: dsi-suspend-state {
+ pins = "gpio133";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ te_active: te-active-state {
+ pins = "gpio86";
+ function = "mdp_vsync";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ te_suspend: te-suspend-state {
+ pins = "gpio86";
+ function = "mdp_vsync";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+};
+
+&uart7 {
+ status = "okay";
+};
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "otg";
+ usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+ remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_dwc3_ss {
+ remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
+};
+
+&usb_1_hsphy {
+ phys = <&pm8550b_eusb2_repeater>;
+
+ vdd-supply = <&vreg_l1e_0p88>;
+ vdda12-supply = <&vreg_l3e_1p2>;
+
+ status = "okay";
+};
+
+&usb_dp_qmpphy {
+ vdda-phy-supply = <&vreg_l3e_1p2>;
+ vdda-pll-supply = <&vreg_l3f_0p88>;
+
+ orientation-switch;
+
+ status = "okay";
+};
+
+&usb_dp_qmpphy_out {
+ remote-endpoint = <&redriver_ss_in>;
+};
+
+&usb_dp_qmpphy_usb_ss_in {
+ remote-endpoint = <&usb_1_dwc3_ss>;
+};
+
+&xo_board {
+ clock-frequency = <76800000>;
+};
--
2.17.1
