[PATCH v5 3/3] arm64: dts: qcom: msm8939-longcheer-l9100: Add rear flash

[André Apitzsch via B4 Relay]

From: André Apitzsch <g...@apitzsch.eu>

The phone has a Silergy SY7802 flash LED controller.

Signed-off-by: André Apitzsch <g...@apitzsch.eu>
---
 .../boot/dts/qcom/msm8939-longcheer-l9100.dts      | 26 ++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts 
b/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts
index e3404c4455cf..528737929274 100644
--- a/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts
+++ b/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts
@@ -159,6 +159,25 @@ led@2 {
                        };
                };
        };
+
+       flash-led-controller@53 {
+               compatible = "silergy,sy7802";
+               reg = <0x53>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
+
+               pinctrl-0 = <&camera_rear_flash_default>;
+               pinctrl-names = "default";
+
+               led@0 {
+                       reg = <0>;
+                       function = LED_FUNCTION_FLASH;
+                       color = <LED_COLOR_ID_WHITE>;
+                       led-sources = <0>, <1>;
+               };
+       };
 };
 
 &blsp_i2c3 {
@@ -318,6 +337,13 @@ camera_front_flash_default: 
camera-front-flash-default-state {
                bias-disable;
        };
 
+       camera_rear_flash_default: camera-rear-flash-default-state {
+               pins = "gpio9", "gpio16", "gpio51";
+               function = "gpio";
+               drive-strength = <2>;
+               bias-disable;
+       };
+
        gpio_hall_sensor_default: gpio-hall-sensor-default-state {
                pins = "gpio20";
                function = "gpio";

-- 
2.45.2