On Mon, Mar 17, 2025 at 09:18:33AM -0500, Rob Herring (Arm) wrote: > > On Sun, 16 Mar 2025 23:16:55 +0100, David Heidelberg wrote: > > From: Ivan Belokobylskiy <[email protected]> > > > > Add initial support for LG Nexus 4 (mako). > > > > Features currently working: regulators, eMMC, and volume keys. > > > > Signed-off-by: Ivan Belokobylskiy <[email protected]> > > Co-developed-by: David Heidelberg <[email protected]> > > Signed-off-by: David Heidelberg <[email protected]> > > --- > > Changes in v5: > > - Sorted nodes alphabetically. > > - Link to v4: > > https://lore.kernel.org/r/[email protected] > > > > Changes in v4: > > - Sorted regulators and added regulators compatible. > > - Corrected pmic include and references. > > - Moved &rpm outside of / node. > > - Moved and simplify pm8921 keypad. > > - Added chasis-type. > > - Dropped incomplete WiFi node, will be provided in future > > contributions. > > - Link to v3: > > https://lore.kernel.org/r/[email protected] > > > > Changes in v3: > > - rebased against next-20250307 > > - dropped backlight until driver gets converted to DT > > > > Changes in v2: > > - lge vendor doesn't exist anymore, rename to lg > > - sdcc@ to mmc@ to comply with dt-schema > > --- > > arch/arm/boot/dts/qcom/Makefile | 1 + > > .../boot/dts/qcom/qcom-apq8064-lg-nexus4-mako.dts | 341 > > +++++++++++++++++++++ > > 2 files changed, 342 insertions(+) > > > > > My bot found new DTB warnings on the .dts files added or changed in this > series. > > Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings > are fixed by another series. Ultimately, it is up to the platform > maintainer whether these warnings are acceptable or not. No need to reply > unless the platform maintainer has comments. > > If you already ran DT checks and didn't see these error(s), then > make sure dt-schema is up to date: > > pip3 install dtschema --upgrade > > > New warnings running 'make CHECK_DTBS=y for arch/arm/boot/dts/qcom/' for > [email protected]: > > arch/arm/boot/dts/qcom/qcom-apq8064-lg-nexus4-mako.dtb: hwmutex: 'reg' is a > required property > from schema $id: > http://devicetree.org/schemas/hwlock/qcom-hwspinlock.yaml# > arch/arm/boot/dts/qcom/qcom-apq8064-lg-nexus4-mako.dtb: hwmutex: 'syscon' > does not match any of the regexes: 'pinctrl-[0-9]+' > from schema $id: > http://devicetree.org/schemas/hwlock/qcom-hwspinlock.yaml# > arch/arm/boot/dts/qcom/qcom-apq8064-lg-nexus4-mako.dtb: soc: replicator: > 'ranges' is a required property > from schema $id: http://devicetree.org/schemas/simple-bus.yaml# > arch/arm/boot/dts/qcom/qcom-apq8064-lg-nexus4-mako.dtb: syscon@1200000: > compatible: ['syscon'] is too short > from schema $id: http://devicetree.org/schemas/mfd/syscon-common.yaml# > arch/arm/boot/dts/qcom/qcom-apq8064-lg-nexus4-mako.dtb: timer@200a000: > 'clocks' is a required property > from schema $id: http://devicetree.org/schemas/watchdog/qcom-wdt.yaml# > arch/arm/boot/dts/qcom/qcom-apq8064-lg-nexus4-mako.dtb: > sps-sic-non-secure@12100000: compatible: ['syscon'] is too short > from schema $id: http://devicetree.org/schemas/mfd/syscon-common.yaml# > arch/arm/boot/dts/qcom/qcom-apq8064-lg-nexus4-mako.dtb: rpm@108000: > 'clock-controller' does not match any of the regexes: '^regulators(-[01])?$', > 'pinctrl-[0-9]+' > from schema $id: http://devicetree.org/schemas/soc/qcom/qcom,rpm.yaml# > arch/arm/boot/dts/qcom/qcom-apq8064-lg-nexus4-mako.dtb: syscon@5700000: > compatible: ['syscon'] is too short > from schema $id: http://devicetree.org/schemas/mfd/syscon-common.yaml# > arch/arm/boot/dts/qcom/qcom-apq8064-lg-nexus4-mako.dtb: replicator: > 'clock-names', 'clocks' do not match any of the regexes: 'pinctrl-[0-9]+' > from schema $id: > http://devicetree.org/schemas/arm/arm,coresight-static-replicator.yaml#
As far as I can see, all those are generic rather than being introduced by the new DT. I'll send a set of fixes soon. -- With best wishes Dmitry
