On 14/09/2025 22:44, Alexandru Chimac wrote:
> Add initial support for the Samsung Galaxy Tab S6 Lite (SM-P610/P615):
> 
> - Framebuffer, through SimpleFB
> - RAM
> - Buttons
> 
> Signed-off-by: Alexandru Chimac <[email protected]>
> ---
>  arch/arm64/boot/dts/exynos/Makefile              |  1 +
>  arch/arm64/boot/dts/exynos/exynos9610-gta4xl.dts | 97 
> ++++++++++++++++++++++++
>  2 files changed, 98 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/exynos/Makefile 
> b/arch/arm64/boot/dts/exynos/Makefile
> index 
> bdb9e9813e506de3a8ff6d1c3115382cca6ea9d9..8aacff968fa10d6b645bafe910c71fb65e8569f8
>  100644
> --- a/arch/arm64/boot/dts/exynos/Makefile
> +++ b/arch/arm64/boot/dts/exynos/Makefile
> @@ -12,6 +12,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += \
>       exynos7885-jackpotlte.dtb       \
>       exynos850-e850-96.dtb           \
>       exynos8895-dreamlte.dtb         \
> +     exynos9610-gta4xl.dtb           \
>       exynos9810-starlte.dtb          \
>       exynos990-c1s.dtb               \
>       exynos990-r8s.dtb               \
> diff --git a/arch/arm64/boot/dts/exynos/exynos9610-gta4xl.dts 
> b/arch/arm64/boot/dts/exynos/exynos9610-gta4xl.dts
> new file mode 100644
> index 
> 0000000000000000000000000000000000000000..f455af22ff872c6f07b9bcfc68b1ae1f45d0def3
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos9610-gta4xl.dts
> @@ -0,0 +1,97 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Galaxy Tab S6 Lite device tree
> + *
> + * Copyright (c) 2025, Alexandru Chimac <[email protected]>
> + */
> +
> +/dts-v1/;
> +
> +#include "exynos9610.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +
> +/ {
> +     compatible = "samsung,gta4xl", "samsung,exynos9610";
> +     #address-cells = <2>;
> +     #size-cells = <1>;
> +
> +     chosen {
> +             #address-cells = <2>;
> +             #size-cells = <1>;
> +             ranges;
> +
> +             framebuffer0: framebuffer@ca000000 {
> +                     compatible = "simple-framebuffer";
> +                     memory-region = <&cont_splash_rmem>;
> +                     width = <1200>;
> +                     height = <2000>;
> +                     stride = <(1200 * 4)>;
> +                     format = "a8r8g8b8";
> +             };
> +     };
> +
> +     memory@80000000 {
> +             device_type = "memory";
> +             reg = <0x0 0x80000000 0x3AB00000>,
> +                   <0x0 0xC0000000 0x20000000>,
> +                   <0x0 0xE1900000 0x1E700000>,

Lowercase hex everywhere.


Best regards,
Krzysztof

Reply via email to