On Fri, Apr 1, 2016 at 10:34 PM, Thor Thayer
<[email protected]> wrote:
> On 04/01/2016 07:17 AM, Linus Walleij wrote:
>>> +struct altr_a10sr_gpio {
>>> + struct altr_a10sr *a10sc;
>>> + struct gpio_chip gp;
>>> +};
>>
>> Add some kerneldoc.
>
> OK. To clarify, is this comment referring to the bindings document or
> something different?
Document the data structure.
Documentation/kernel-doc-nano-HOWTO.txt
>> Please check:
>> - If there is really no direction setting anywhere
>> - For example if some lines are hardwired as input and
>> some lines are hardwired as output
>> - If that is not the case, verify that all lines are really
>> open drain, they should be if all are both input and
>> output at the same time.
>>
>
> I see your point. I'll investigate how to do this properly for your 2nd
> check above. Registers are hard-wired as input or output so I'll need to
> handle this properly and is why I didn't implement the .set_direction
> callback. Thanks for the explanation.
>
> In my case, there are 12 valid GPIOs out of the 16 bits (the first 4 bits
> are unused). Bits 4-7 are output and bits 8-15 are inputs. I was using the
> IN_VALID range for the inputs and the OUT_VALID range for the outputs.
It sounds like should implement direction_[input|output]() callbacks
and just return 0 if the user is asking for the hardwired direction and return
error if it tries to set an input-only to output and vice versa.
Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
