On Fri, Oct 07, 2016 at 06:21:01PM +0300, Pantelis Antoniou wrote:
> From: Georgi Vlaev <gvl...@juniper.net>
>
> Add device tree bindings for the Juniper I2CS MFD driver.
>
> Signed-off-by: Georgi Vlaev <gvl...@juniper.net>
> [Ported from Juniper kernel]
> Signed-off-by: Pantelis Antoniou <pantelis.anton...@konsulko.com>
> ---
> Documentation/devicetree/bindings/mfd/jnx-i2cs.txt | 68
> ++++++++++++++++++++++
> 1 file changed, 68 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/jnx-i2cs.txt
>
> diff --git a/Documentation/devicetree/bindings/mfd/jnx-i2cs.txt
> b/Documentation/devicetree/bindings/mfd/jnx-i2cs.txt
> new file mode 100644
> index 0000000..0ec103b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/jnx-i2cs.txt
> @@ -0,0 +1,68 @@
> +Device-Tree bindings for Juniper Networks I2CS FPGA MFD
> +
> +Required properties:
> +- compatible - Must be one of:
> + "jnx,i2cs-rcb" (Routing Engine or Control Board FRUs)
> + "jnx,i2cs-fpc" (Flexible Port Concentrator FRUs)
> + "jnx,i2cs-sib" (Switching Interface Board FRUs)
> + "jnx,i2cs-fan" (Fan Tray FRUs)
> +
> +Optional properties:
> +
> +Depending on the FRU, the I2CS MFD has varied group of sub-devices:
> +
> +Device Description
> +------ -----------
> +jnx,i2cs-gpio : Virtual gpio mapping driver
> +jnx,i2cs-fan-hwmon : hwmon driver for fan trays
> +jnx,i2c-mux-i2cs : I2C Mux driver for FPC FRUs
> +jnx,leds-i2cs : Led driver
> +
> +All these optional nodes are described in their respective binding
> +documents.
> +
> +Example node:
> +
> +i2cs@54 {
> + compatible = "jnx,i2cs-fpc";
> + reg = <0x54>;
> + #address-cells = <0>;
> + #size-cells = <0>;
> +
> + fpc2_mux {
Generic node names please.
mux {
> + compatible = "jnx,i2c-mux-i2cs";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + fpc2i2c0: i2c@0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0>;
> + };
> + };
> +
> + fpc2_gpiomap: gpio-jnx-i2cs {
gpio@54 {
> + compatible = "jnx,gpio-i2cs";
> + reg = <0x54>;
> + #gpio-cells = <2>;
> + gpio-controller;
> + interrupt-controller;
> +
> + /*
> + * Map bits [0-3] of reg 0x21 as gpio inputs, bits [4-7]
> + * as gpio outputs
> + */
> + i2c-gpio-map = <0x21 0x0f>;
> + };
> +
> + leds-jnx-i2cs {
leds {
> + compatible = "jnx,leds-i2cs";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + sib8-active {
> + reg = <0>;
> + linux,default-trigger = "sib8-active";
> + };
> + };
> +};
> --
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
