This patch adds lm87 hwmon device tree node documentation.
Signed-off-by: Mahoda Ratnayaka <mahoda.ratnay...@alliedtelesis.co.nz>
---
Notes:
Changes since v1:
As suggested include all the changes are moved in
to the same patch and the all the optional properties
are now defined instead of using a single variable to
indicate those properties.
Changes since v2:
Changed has-vcc-5v to use regulator binding and fixed
a minor copy paste mistake.
Documentation/devicetree/bindings/hwmon/lm87.txt | 30 ++++++++++++++++++++++++
1 file changed, 30 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/lm87.txt
diff --git a/Documentation/devicetree/bindings/hwmon/lm87.txt
b/Documentation/devicetree/bindings/hwmon/lm87.txt
new file mode 100644
index 0000000..ce93d45
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/lm87.txt
@@ -0,0 +1,30 @@
+*LM87 hwmon sensor.
+
+Required properties:
+- compatible: Should be
+ "ti,lm87"
+
+- reg: I2C address
+
+optional properties:
+- has-temp3: This configures pins 18 and 19 to be used as a second
+ remote temperature sensing channel. By default the pins
+ are configured as voltage input pins in0 and in5.
+
+- has-in6: When set, pin 5 is configured to be used as voltage input
+ in6. Otherwise the pin is set as FAN1 input.
+
+- has-in7: When set, pin 6 is configured to be used as voltage input
+ in7. Otherwise the pin is set as FAN2 input.
+
+- vcc-supply: sets the nominal voltage for internal VCC measurement to 5V.
+ Default is 3.3V.
+
+Example:
+
+lm87@2e {
+ compatible = "ti,lm87";
+ reg = <0x2e>;
+ has-temp3;
+ vcc-supply = <®_5v0>;
+};
--
2.10.1
--
To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
