This commit adds a dt-bindings document of PECI adapter driver for Aspeed
AST24xx/25xx SoCs.
Signed-off-by: Jae Hyun Yoo <jae.hyun....@linux.intel.com>
Reviewed-by: Haiyue Wang <haiyue.w...@linux.intel.com>
Reviewed-by: James Feist <james.fe...@linux.intel.com>
Reviewed-by: Vernon Mauery <vernon.mau...@linux.intel.com>
Cc: Alan Cox <a...@linux.intel.com>
Cc: Andrew Jeffery <and...@aj.id.au>
Cc: Andrew Lunn <and...@lunn.ch>
Cc: Andy Shevchenko <andriy.shevche...@intel.com>
Cc: Arnd Bergmann <a...@arndb.de>
Cc: Benjamin Herrenschmidt <b...@kernel.crashing.org>
Cc: Fengguang Wu <fengguang...@intel.com>
Cc: Greg KH <gre...@linuxfoundation.org>
Cc: Guenter Roeck <li...@roeck-us.net>
Cc: Jason M Biils <jason.m.bi...@linux.intel.com>
Cc: Jean Delvare <jdelv...@suse.com>
Cc: Joel Stanley <j...@jms.id.au>
Cc: Julia Cartwright <jul...@eso.teric.us>
Cc: Miguel Ojeda <miguel.ojeda.sando...@gmail.com>
Cc: Milton Miller II <milt...@us.ibm.com>
Cc: Pavel Machek <pa...@ucw.cz>
Cc: Randy Dunlap <rdun...@infradead.org>
Cc: Stef van Os <stef.van...@prodrive-technologies.com>
Cc: Sumeet R Pawnikar <sumeet.r.pawni...@intel.com>
---
.../devicetree/bindings/peci/peci-aspeed.txt | 60 ++++++++++++++++++++++
1 file changed, 60 insertions(+)
create mode 100644 Documentation/devicetree/bindings/peci/peci-aspeed.txt
diff --git a/Documentation/devicetree/bindings/peci/peci-aspeed.txt
b/Documentation/devicetree/bindings/peci/peci-aspeed.txt
new file mode 100644
index 000000000000..4598bb8c20fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/peci/peci-aspeed.txt
@@ -0,0 +1,60 @@
+Device tree configuration for PECI buses on the AST24XX and AST25XX SoCs.
+
+Required properties:
+- compatible : Should be "aspeed,ast2400-peci" or "aspeed,ast2500-peci"
+ - aspeed,ast2400-peci: Aspeed AST2400 family PECI
+ controller
+ - aspeed,ast2500-peci: Aspeed AST2500 family PECI
+ controller
+- reg : Should contain PECI controller registers location and
+ length.
+- #address-cells : Should be <1>.
+- #size-cells : Should be <0>.
+- interrupts : Should contain PECI controller interrupt.
+- clocks : Should contain clock source for PECI controller.
+ Should reference clkin.
+- clock_frequency : Should contain the operation frequency of PECI controller
+ in units of Hz.
+ 187500 ~ 24000000
+
+Optional properties:
+- msg-timing-nego : Message timing negotiation period. This value will
+ determine the period of message timing negotiation to be
+ issued by PECI controller. The unit of the programmed
+ value is four times of PECI clock period.
+ 0 ~ 255 (default: 1)
+- addr-timing-nego : Address timing negotiation period. This value will
+ determine the period of address timing negotiation to be
+ issued by PECI controller. The unit of the programmed
+ value is four times of PECI clock period.
+ 0 ~ 255 (default: 1)
+- rd-sampling-point : Read sampling point selection. The whole period of a bit
+ time will be divided into 16 time frames. This value will
+ determine the time frame in which the controller will
+ sample PECI signal for data read back. Usually in the
+ middle of a bit time is the best.
+ 0 ~ 15 (default: 8)
+- cmd_timeout_ms : Command timeout in units of ms.
+ 1 ~ 60000 (default: 1000)
+
+Example:
+ peci: peci@1e78b000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1e78b000 0x60>;
+
+ peci0: peci-bus@0 {
+ compatible = "aspeed,ast2500-peci";
+ reg = <0x0 0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <15>;
+ clocks = <&clk_clkin>;
+ clock-frequency = <24000000>;
+ msg-timing-nego = <1>;
+ addr-timing-nego = <1>;
+ rd-sampling-point = <8>;
+ cmd-timeout-ms = <1000>;
+ };
+ };
--
2.16.2
--
To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
