On 7/22/19 5:12 PM, Vijay Khemka wrote:
On 7/22/19, 1:06 PM, "Guenter Roeck" <[email protected] on behalf of
[email protected]> wrote:
On Mon, Jul 22, 2019 at 12:24:48PM -0700, Vijay Khemka wrote:
> Added new DT binding document for Infineon PXE1610 devices.
>
> Signed-off-by: Vijay Khemka <[email protected]>
> ---
> .../devicetree/bindings/hwmon/pxe1610.txt | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/hwmon/pxe1610.txt
>
> diff --git a/Documentation/devicetree/bindings/hwmon/pxe1610.txt
b/Documentation/devicetree/bindings/hwmon/pxe1610.txt
> new file mode 100644
> index 000000000000..635daf4955db
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/pxe1610.txt
> @@ -0,0 +1,15 @@
> +pxe1610 properties
> +
> +Required properties:
> +- compatible: Must be one of the following:
> + - "infineon,pxe1610" for pxe1610
> + - "infineon,pxe1110" for pxe1610
> + - "infineon,pxm1310" for pxm1310
> +- reg: I2C address
> +
> +Example:
> +
> +vr@48 {
> + compatible = "infineon,pxe1610";
> + reg = <0x48>;
> +};
Wouldn't it be better to add this to
./Documentation/devicetree/bindings/trivial-devices.txt ?
Sure, I didn't know about this file. I will add and send another patch. It is
Documentation/devicetree/bindings/trivial-devices.yaml. How do I abandon
this patch or just leave it.
When you send v2, just add the device to the trivial-devices file instead
and describe the differences to v1 (ie this patch).
Guenter
