On Tue, Sep 03, 2019 at 08:12:55PM +0200, Wolfram Sang wrote:
> And simplify the error handling.
>
> Signed-off-by: Wolfram Sang <wsa+rene...@sang-engineering.com>
Applied to hwmon-next.
Thanks,
Guenter
> ---
> drivers/hwmon/w83792d.c | 32 +++++++++-----------------------
> 1 file changed, 9 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c
> index da8a6d62aa23..7fc8a1160c8f 100644
> --- a/drivers/hwmon/w83792d.c
> +++ b/drivers/hwmon/w83792d.c
> @@ -924,7 +924,7 @@ store_sf2_level(struct device *dev, struct
> device_attribute *attr,
> static int
> w83792d_detect_subclients(struct i2c_client *new_client)
> {
> - int i, id, err;
> + int i, id;
> int address = new_client->addr;
> u8 val;
> struct i2c_adapter *adapter = new_client->adapter;
> @@ -938,8 +938,7 @@ w83792d_detect_subclients(struct i2c_client *new_client)
> dev_err(&new_client->dev,
> "invalid subclient address %d; must be
> 0x48-0x4f\n",
> force_subclients[i]);
> - err = -ENODEV;
> - goto ERROR_SC_0;
> + return -ENODEV;
> }
> }
> w83792d_write_value(new_client, W83792D_REG_I2C_SUBADDR,
> @@ -949,28 +948,21 @@ w83792d_detect_subclients(struct i2c_client *new_client)
>
> val = w83792d_read_value(new_client, W83792D_REG_I2C_SUBADDR);
> if (!(val & 0x08))
> - data->lm75[0] = i2c_new_dummy(adapter, 0x48 + (val & 0x7));
> + data->lm75[0] = devm_i2c_new_dummy_device(&new_client->dev,
> adapter,
> + 0x48 + (val & 0x7));
> if (!(val & 0x80)) {
> - if ((data->lm75[0] != NULL) &&
> + if (!IS_ERR(data->lm75[0]) &&
> ((val & 0x7) == ((val >> 4) & 0x7))) {
> dev_err(&new_client->dev,
> "duplicate addresses 0x%x, use
> force_subclient\n",
> data->lm75[0]->addr);
> - err = -ENODEV;
> - goto ERROR_SC_1;
> + return -ENODEV;
> }
> - data->lm75[1] = i2c_new_dummy(adapter,
> - 0x48 + ((val >> 4) & 0x7));
> + data->lm75[1] = devm_i2c_new_dummy_device(&new_client->dev,
> adapter,
> + 0x48 + ((val >> 4) &
> 0x7));
> }
>
> return 0;
> -
> -/* Undo inits in case of errors */
> -
> -ERROR_SC_1:
> - i2c_unregister_device(data->lm75[0]);
> -ERROR_SC_0:
> - return err;
> }
>
> static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, show_in, NULL, 0);
> @@ -1396,7 +1388,7 @@ w83792d_probe(struct i2c_client *client, const struct
> i2c_device_id *id)
> /* Register sysfs hooks */
> err = sysfs_create_group(&dev->kobj, &w83792d_group);
> if (err)
> - goto exit_i2c_unregister;
> + return err;
>
> /*
> * Read GPIO enable register to check if pins for fan 4,5 are used as
> @@ -1441,9 +1433,6 @@ w83792d_probe(struct i2c_client *client, const struct
> i2c_device_id *id)
> sysfs_remove_group(&dev->kobj, &w83792d_group);
> for (i = 0; i < ARRAY_SIZE(w83792d_group_fan); i++)
> sysfs_remove_group(&dev->kobj, &w83792d_group_fan[i]);
> -exit_i2c_unregister:
> - i2c_unregister_device(data->lm75[0]);
> - i2c_unregister_device(data->lm75[1]);
> return err;
> }
>
> @@ -1459,9 +1448,6 @@ w83792d_remove(struct i2c_client *client)
> sysfs_remove_group(&client->dev.kobj,
> &w83792d_group_fan[i]);
>
> - i2c_unregister_device(data->lm75[0]);
> - i2c_unregister_device(data->lm75[1]);
> -
> return 0;
> }
>
> --
> 2.20.1
>
