> Version three of the driver for Texas Instruments TMP512/513 sensors. > > Thanks again for the review, I think we are getting close. I'm not in an easy > position for now to test the driver without device tree. I > can put the required effort to
Sorry, I mean that I'm not in a good position to test it, but I can put the required effort to if needed. > > Main changes from version 2: > - Remove the neccessity to provide a shunt-resistor value > - Remove max-expected-current-ma configuration and always > use max possible current for calibration > - Make sure calculation during calibration can't overflow > - Add value clamping for DT value and runtime parameters > - Support non DT system > - Move hysteresis from DT to standard attribute > > Main changes from version 1: > - Use the with_info API instead of sysfs attributes. > - Remove non-standard attributes and raw value. > - Move settings that were non-standard attributes to > device tree, update documentation as well. > - Fix coding style issues > > Eric Tremblay (2): > Add driver for Texas Instruments TMP512/513 sensor chips. > Add DT bindings for TMP513 driver > > .../devicetree/bindings/hwmon/tmp513.txt | 33 + > Documentation/hwmon/tmp513.rst | 102 ++ > MAINTAINERS | 7 + > drivers/hwmon/Kconfig | 10 + > drivers/hwmon/Makefile | 1 + > drivers/hwmon/tmp513.c | 901 ++++++++++++++++++ > include/linux/platform_data/tmp513.h | 28 + > 7 files changed, 1082 insertions(+) > create mode 100644 Documentation/devicetree/bindings/hwmon/tmp513.txt > create mode 100644 Documentation/hwmon/tmp513.rst create mode 100644 > drivers/hwmon/tmp513.c create mode 100644 > include/linux/platform_data/tmp513.h > > -- > 2.17.1
