On Mon, Feb 25, 2019 at 04:59:17PM +0100, Stefan Wahren wrote:
> This adds the tachometer interrupt to the pwm-fan binding, which is
> necessary for RPM support.
>
> Signed-off-by: Stefan Wahren <stefan.wah...@i2se.com>
> ---
> Documentation/devicetree/bindings/hwmon/pwm-fan.txt | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
> b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
> index 49ca5d8..7d09623 100644
> --- a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
> +++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
> @@ -8,6 +8,14 @@ Required properties:
>
> Optional properties:
> - fan-supply : phandle to the regulator that provides power to the fan
> +- interrupts : This contains a single interrupt specifier which
> + describes the tachometer output of the fan as an
> + interrupt source. The output signal must generate a
> + defined number of interrupts per fan revolution, which
> + require that it must be self resetting edge interrupts.
> + See interrupt-controller/interrupts.txt for the format.
> +- interrupt-ratio : defines the ratio interrupts per fan revolution as an
> + integer (default is 2 interrupts per revolution)
Name this for what it is, not how it is used. Using 'interrupt' is
misleading that it is related to the interrupt binding.
'tach-pulse-per-rev' or something similar.
>
> Example:
> fan0: pwm-fan {
> @@ -38,3 +46,14 @@ Example:
> };
> };
> };
> +
> +Example 2:
> + fan0: pwm-fan {
> + fan0: pwm-fan {
> + compatible = "pwm-fan";
> + pwms = <&pwm 0 40000 0>;
> + fan-supply = <®_fan>;
> + interrupt-parent = <&gpio5>;
> + interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
> + interrupt-ratio = <2>;
> + };
> --
> 2.7.4
>
