From: Jason A. Donenfeld <ja...@zx2c4.com> Sent: Wednesday, March 13, 2024 4:33
PM
>
> Hi Michael,
>
> On Thu, Mar 07, 2024 at 10:48:20AM -0800, mhkelle...@gmail.com wrote:
> > + /*
> > + * Seed the Linux random number generator with entropy provided by
> > + * the Hyper-V host in ACPI table OEM0. It would be nice to do this
> > + * even earlier in ms_hyperv_init_platform(), but the ACPI subsystem
> > + * isn't set up at that point. Skip if booted via EFI as generic EFI
> > + * code has already done some seeding using the EFI RNG protocol.
> > + */
> > + if (!IS_ENABLED(CONFIG_ACPI) || efi_enabled(EFI_BOOT))
> > + return;
>
> Even if EFI seeds the kernel using its own code, if this is available,
> it should be used too. So I think you should remove the `||
> efi_enabled(EFI_BOOT)`
> part and let the add_bootloader_randomness() do what it wants with the
> entropy.
OK, fair enough. But just to double-check: When this is called,
the EFI RNG protocol has already invoked add_bootloader_randomness(),
and this line has been output:
[ 0.000000] random: crng init done
I don't see an obvious problem with calling add_bootloader_randomness()
again, but wanted to confirm.
Also, if we're adding this ACPI-based randomness for VMs that
boot via EFI, then for consistency we should use it on Hyper-V
based ARM64 VMs as well.
>
> > +
> > + status = acpi_get_table("OEM0", 0, &header);
> > + if (ACPI_FAILURE(status) || !header)
> > + return;
> > +
> > + /*
> > + * Since the "OEM0" table name is for OEM specific usage, verify
> > + * that what we're seeing purports to be from Microsoft.
> > + */
> > + if (strncmp(header->oem_table_id, "MICROSFT", 8))
> > + goto error;
> > +
> > + /*
> > + * Ensure the length is reasonable. Requiring at least 32 bytes and
> > + * no more than 256 bytes is somewhat arbitrary. Hyper-V currently
> > + * provides 64 bytes, but allow for a change in a later version.
> > + */
> > + if (header->length < sizeof(*header) + 32 ||
> > + header->length > sizeof(*header) + 256)
>
> What's the point of the lower bound? Obviously skip for 0, but if
> there's only 16 bytes, cool, 16 bytes is good and can't hurt.
>
> For the upper bound, I understand you need some sanity check. Why not
> put it a bit higher, though, at SZ_4K or something? Can't hurt.
Both bounds are just a check for bogusness. Having the hypervisor
provide just 4 bytes (for example) of randomness seems like
there might be something weird going on. But widening the bounds
is fine with me. I'll use "8" and "SZ_4K".
>
> > + goto error;
> > +
> > + length = header->length - sizeof(*header);
> > + randomdata = (u8 *)(header + 1);
> > +
> > + pr_debug("Hyper-V: Seeding rng with %d random bytes from ACPI table
> > OEM0\n",
> > + length);
> > +
> > + add_bootloader_randomness(randomdata, length);
> > +
> > + /*
> > + * To prevent the seed data from being visible in /sys/firmware/acpi,
> > + * zero out the random data in the ACPI table and fixup the checksum.
> > + */
> > + for (i = 0; i < length; i++) {
> > + header->checksum += randomdata[i];
> > + randomdata[i] = 0;
> > + }
>
> Seems dangerous for kexec and such. What if, in addition to zeroing out
> the actual data, you also set header->length to 0, so that it doesn't
> get used again as 32 bytes of known zeros?
What's your take on the whole idea of zero'ing the random data? I
saw the EFI RNG protocol handling was doing something roughly
similiar. But yes, good point about kexec(). Zeroing the header->length
would make sense to prevent any re-use.
Thanks for reviewing -- I wanted to get the benefit of your expertise
in this area. :-)
Michael
