From: Michael Hennerich <[email protected]> Make sure we don't end up with an invalid CLKDIV=0 in case someone specifies 20kHz SCL or less (5 * 1024 / 20 = 0x100).
Signed-off-by: Michael Hennerich <[email protected]> Signed-off-by: Mike Frysinger <[email protected]> Signed-off-by: Bryan Wu <[email protected]> --- drivers/i2c/busses/Kconfig | 2 +- drivers/i2c/busses/i2c-bfin-twi.c | 11 ++++++++--- 2 files changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index f1c6ca7..c8460fa 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -298,7 +298,7 @@ config I2C_BLACKFIN_TWI config I2C_BLACKFIN_TWI_CLK_KHZ int "Blackfin TWI I2C clock (kHz)" depends on I2C_BLACKFIN_TWI - range 10 400 + range 21 400 default 50 help The unit of the TWI clock is kHz. diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c index fc548b3..3ab1f66 100644 --- a/drivers/i2c/busses/i2c-bfin-twi.c +++ b/drivers/i2c/busses/i2c-bfin-twi.c @@ -614,6 +614,7 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev) struct i2c_adapter *p_adap; struct resource *res; int rc; + unsigned int clkhilow; iface = kzalloc(sizeof(struct bfin_twi_iface), GFP_KERNEL); if (!iface) { @@ -675,10 +676,14 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev) /* Set TWI internal clock as 10MHz */ write_CONTROL(iface, ((get_sclk() / 1024 / 1024 + 5) / 10) & 0x7F); + /* + * We will not end up with a CLKDIV=0 cause no one will specifies + * 20kHz SCL or less in Kconfig now. (5 * 1024 / 20 = 0x100) + */ + clkhilow = 5 * 1024 / CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ; + /* Set Twi interface clock as specified */ - write_CLKDIV(iface, ((5*1024 / CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ) - << 8) | ((5*1024 / CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ) - & 0xFF)); + write_CLKDIV(iface, (clkhilow << 8) | clkhilow); /* Enable TWI */ write_CONTROL(iface, read_CONTROL(iface) | TWI_ENA); -- 1.6.3.1 -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
