On Wed, Nov 03, 2010 at 05:26:29PM -0700, Guenter Roeck wrote:
> Signed-off-by: Guenter Roeck <[email protected]>
> ---
> This is an usb-i2c adapter I am using to connect to i2c evaluation and test
> boards. Not sure if it is worth adding it into the kernel. If yes, I'll be
> happy to add myself as maintainer.
>
> drivers/i2c/busses/Kconfig | 10 +
> drivers/i2c/busses/Makefile | 1 +
> drivers/i2c/busses/i2c-diolan-u2c.c | 455
> +++++++++++++++++++++++++++++++++++
> 3 files changed, 466 insertions(+), 0 deletions(-)
> create mode 100644 drivers/i2c/busses/i2c-diolan-u2c.c
>
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index 3a6321c..d73be36 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -640,6 +640,16 @@ config I2C_XILINX
>
> comment "External I2C/SMBus adapter drivers"
>
> +config I2C_DIOLAN_U2C
> + tristate "Diolan U2C-12 USB adapter"
> + depends on USB
> + help
> + If you say yes to this option, support will be included for Diolan
> + U2C-12, a USB to I2C interface.
> +
> + This driver can also be built as a module. If so, the module
> + will be called i2c-diolan-u2c.
> +
> config I2C_PARPORT
> tristate "Parallel port adapter"
> depends on PARPORT
> diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
> index 84cb16a..46315db 100644
> --- a/drivers/i2c/busses/Makefile
> +++ b/drivers/i2c/busses/Makefile
> @@ -63,6 +63,7 @@ obj-$(CONFIG_I2C_OCTEON) += i2c-octeon.o
> obj-$(CONFIG_I2C_XILINX) += i2c-xiic.o
>
> # External I2C/SMBus adapter drivers
> +obj-$(CONFIG_I2C_DIOLAN_U2C) += i2c-diolan-u2c.o
> obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o
> obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o
> obj-$(CONFIG_I2C_TAOS_EVM) += i2c-taos-evm.o
> diff --git a/drivers/i2c/busses/i2c-diolan-u2c.c
> b/drivers/i2c/busses/i2c-diolan-u2c.c
> new file mode 100644
> index 0000000..5f4fb74
> --- /dev/null
> +++ b/drivers/i2c/busses/i2c-diolan-u2c.c
> @@ -0,0 +1,455 @@
> +/*
> + * driver for the Diolan u2c-12 usb adapter
> + *
> + * Copyright (c) 2010 Ericsson AB
> + *
> + * Derived from:
> + * i2c-tiny-usb.c
> + * Copyright (C) 2006-2007 Till Harbaum ([email protected])
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation, version 2.
> + *
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/errno.h>
> +#include <linux/module.h>
> +#include <linux/types.h>
> +#include <linux/slab.h>
> +#include <linux/usb.h>
> +#include <linux/i2c.h>
> +
> +#define USB_VENDOR_ID_DIOLAN 0x0abf
> +#define USB_DEVICE_ID_DIOLAN_U2C 0x3370
> +
> +#define DIOLAN_OUT_EP 0x02
> +#define DIOLAN_IN_EP 0x84
> +
> +/* commands via USB, must match command ids in the firmware */
> +#define CMD_I2C_READ 0x01
> +#define CMD_I2C_WRITE 0x02
> +#define CMD_I2C_SCAN 0x03 /* Returns list of detected devices */
> +#define CMD_I2C_RELEASE_SDA 0x04
> +#define CMD_I2C_RELEASE_SCL 0x05
> +#define CMD_I2C_DROP_SDA 0x06
> +#define CMD_I2C_DROP_SCL 0x07
> +#define CMD_I2C_READ_SDA 0x08
> +#define CMD_I2C_READ_SCL 0x09
> +#define CMD_GET_FW_VERSION 0x0a
> +#define CMD_GET_SERIAL 0x0b
> +#define CMD_I2C_START 0x0c
> +#define CMD_I2C_STOP 0x0d
> +#define CMD_I2C_REPEATED_START 0x0e
> +#define CMD_I2C_PUT_BYTE 0x0f
> +#define CMD_I2C_GET_BYTE 0x10
> +#define CMD_I2C_PUT_ACK 0x11
> +#define CMD_I2C_GET_ACK 0x12
> +#define CMD_I2C_PUT_BYTE_ACK 0x13
> +#define CMD_I2C_GET_BYTE_ACK 0x14
> +#define CMD_I2C_SET_SPEED 0x1b
> +#define CMD_I2C_GET_SPEED 0x1c
> +#define CMD_SET_CLOCK_SYNCH 0x24
> +#define CMD_GET_CLOCK_SYNCH 0x25
> +#define CMD_SET_CLOCK_SYNCH_TO 0x26
> +#define CMD_GET_CLOCK_SYNCH_TO 0x27
> +
> +#define RESP_OK 0x00
> +#define RESP_FAILED 0x01
> +#define RESP_BAD_MEMADDR 0x04
> +#define RESP_DATA_ERR 0x05
> +#define RESP_NOT_IMPLEMENTED 0x06
> +#define RESP_NACK 0x07
> +
> +#define U2C_I2C_FREQ_FAST 0 /* 400 kHz */
> +#define U2C_I2C_FREQ_STD 1 /* 100 kHz */
> +#define U2C_I2C_FREQ_83KHZ 2
> +#define U2C_I2C_FREQ_71KHZ 3
> +#define U2C_I2C_FREQ_62KHZ 4
> +#define U2C_I2C_FREQ_50KHZ 6
> +#define U2C_I2C_FREQ_25KHZ 16
> +#define U2C_I2C_FREQ_10KHZ 46
> +#define U2C_I2C_FREQ_5KHZ 96
> +#define U2C_I2C_FREQ_2KHZ 242
> +
> +#define DIOLAN_USB_TIMEOUT 100
> +
> +/* Structure to hold all of our device specific stuff */
> +struct i2c_diolan_u2c {
> + struct usb_device *usb_dev; /* the usb device for this device */
> + struct usb_interface *interface;/* the interface for this device */
> + struct i2c_adapter adapter; /* i2c related things */
> +};
> +
> +/* usb layer */
> +
> +static int diolan_usb_transfer(struct i2c_adapter *adapter, u8 * obuffer,
> + int olen, u8 *ibuffer, int ilen)
> +{
> + struct i2c_diolan_u2c *dev = adapter->algo_data;
> + int ret = 0;
> + int actual;
> + unsigned char inbuffer[257];
> +
> + if (olen) {
> + ret = usb_bulk_msg(dev->usb_dev,
> + usb_sndbulkpipe(dev->usb_dev, DIOLAN_OUT_EP),
> + obuffer, olen, &actual, DIOLAN_USB_TIMEOUT);
> + }
> + if (!ret) {
> + ret = usb_bulk_msg(dev->usb_dev,
> + usb_rcvbulkpipe(dev->usb_dev, DIOLAN_IN_EP),
> + inbuffer, sizeof(inbuffer), &actual,
> + DIOLAN_USB_TIMEOUT);
> + if (ret == 0 && actual > 0) {
> + ret = min(actual, ilen);
> + switch (inbuffer[actual - 1]) {
> + case RESP_NACK:
> + ret = -EINVAL;
> + goto abort;
> + case RESP_OK:
> + break;
> + default:
> + ret = -EIO;
> + goto abort;
> + }
> + if (ret)
> + memcpy(ibuffer, inbuffer, ret);
> + }
> + }
> +abort:
> + return ret;
> +}
> +
> +/*
> + * Flush input queue.
> + * If we don't do this at startup and the controller has queued up
> + * messages which were not retrieved, it will stop responding
> + * at some point.
> + */
> +static void diolan_flush_input(struct usb_device *dev)
> +{
> + int i;
> +
> + for (i = 0; i < 10; i++) {
> + int actual = 0;
> + int ret;
> + u8 inbuffer[257];
> +
> + ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, DIOLAN_IN_EP),
> + inbuffer, sizeof(inbuffer), &actual,
> + DIOLAN_USB_TIMEOUT);
> + if (ret < 0 || actual == 0)
> + break;
> + }
> +}
> +
> +static int diolan_i2c_start(struct i2c_adapter *adapter)
> +{
> + u8 buffer[1];
> +
> + buffer[0] = CMD_I2C_START;
> +
> + return diolan_usb_transfer(adapter, buffer, 1, buffer, 1);
> +}
> +
> +static int diolan_i2c_repeated_start(struct i2c_adapter *adapter)
> +{
> + u8 buffer[1];
note, transfers to/from stack memory are not advised, esp. if this
involves the hardware dma-mapping the stack. Please move the buffer
to your private data.
> + buffer[0] = CMD_I2C_REPEATED_START;
> +
> + return diolan_usb_transfer(adapter, buffer, 1, buffer, 1);
> +}
why not doing something like
diolan_usb_cmd1(struct i2c_adapter *adapter, u8 command)
{
struct i2c_diolan_u2c *dev = adapter->algo_data;
dev->buffer[0] = command;
return diolan_usb_treansfer(adapter, dev->buffer, 1, dev->buffer, 1);
}
then a lot of these little transfer functions could be turned into much
smaller ones.
ie:
static int diolan_i2c_stop(struct i2c_adapter *adapter)
{
return diolan_usb_cmd1(adapter, CMD_I2C_STOP);
}
> +static int diolan_i2c_stop(struct i2c_adapter *adapter)
> +{
> + u8 buffer[1];
> +
> + buffer[0] = CMD_I2C_STOP;
> +
> + return diolan_usb_transfer(adapter, buffer, 1, buffer, 1);
> +}
> +
> +static int diolan_i2c_get_byte_ack(struct i2c_adapter *adapter, bool ack,
> + u8 *byte)
> +{
> + u8 buffer[2];
> + int rv;
> +
> + buffer[0] = CMD_I2C_GET_BYTE_ACK;
> + buffer[1] = ack;
> +
> + rv = diolan_usb_transfer(adapter, buffer, 2, buffer, 2);
> + if (rv > 0)
> + *byte = buffer[0];
> + else if (rv == 0)
> + rv = -EIO;
> +
> + return rv;
> +}
see notes about stack-mapping buffer.
> +static int diolan_i2c_put_byte_ack(struct i2c_adapter *adapter, u8 byte)
> +{
> + u8 buffer[2];
> +
> + buffer[0] = CMD_I2C_PUT_BYTE_ACK;
> + buffer[1] = byte;
> +
> + return diolan_usb_transfer(adapter, buffer, 2, buffer, 1);
> +}
> +
> +static int diolan_set_speed(struct i2c_adapter *adapter, u8 speed)
> +{
> + u8 buffer[2];
> +
> + buffer[0] = CMD_I2C_SET_SPEED;
> + buffer[1] = speed;
> +
> + return diolan_usb_transfer(adapter, buffer, 2, buffer, 1);
> +}
maybe roll-up the 2 byte transfers in the same was a one-byte.
> +static int diolan_fw_version(struct i2c_adapter *adapter)
> +{
> + u8 buffer[3];
> + int ret;
> +
> + buffer[0] = CMD_GET_FW_VERSION;
> + ret = diolan_usb_transfer(adapter, buffer, 1, buffer, 3);
> + if (ret == 3)
> + dev_info(&adapter->dev,
> + "Diolan U2C firmware version %d.%d\n",
> + buffer[0], buffer[1]);
> + return ret;
> +}
> +
> +static int diolan_get_serial(struct i2c_adapter *adapter)
> +{
> + u8 buffer[5];
> + int ret;
> +
> + buffer[0] = CMD_GET_SERIAL;
> + ret = diolan_usb_transfer(adapter, buffer, 1, buffer, 5);
> + if (ret == 5)
> + dev_info(&adapter->dev,
> + "Diolan U2C serial number %d\n", *(u32 *) &buffer[0]);
*(u32 *) isn't nice, esp. as you're not going to know the endian-ness of
the host you are running on. suggest trying a explict le32 ot be32 get of
the data.
> + return ret;
> +}
> +static int diolan_scan(struct i2c_adapter *adapter)
> +{
> + u8 buffer[257];
> + int i, ret;
suggest kmalloc() the buffer.
> + buffer[0] = CMD_I2C_SCAN;
> + ret = diolan_usb_transfer(adapter, buffer, 1, buffer, 257);
> + if (ret > 0) {
> + for (i = 0; i < ret - 1; i++) {
> + if (buffer[i])
> + dev_info(&adapter->dev,
> + "Found I2C device at address 0x%x\n",
> + buffer[i] >> 1);
> + }
> + }
> + return ret;
do you really need to do this, we've already got a userspace i2cdetect
tool?
> +}
> +
> +/* i2c layer */
> +
> +static int usb_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int
> num)
> +{
> + struct i2c_msg *pmsg;
> + int i, j;
> + int rc = 0;
> +
> + rc = diolan_i2c_start(adapter);
> + if (rc < 0)
> + return rc;
> +
> + for (i = 0; i < num; i++) {
> + pmsg = &msgs[i];
> + if (i) {
> + rc = diolan_i2c_repeated_start(adapter);
> + if (rc < 0)
> + goto abort;
> + }
> + if (pmsg->flags & I2C_M_RD) {
> + rc = diolan_i2c_put_byte_ack(adapter,
> + ((pmsg->addr & 0x7f) << 1) | 1);
> + if (rc < 0)
> + goto abort;
> + for (j = 0; j < pmsg->len; j++) {
> + u8 byte;
> + bool ack = j < pmsg->len - 1;
> +
> + /*
> + * Don't send NACK if this is the first byte
> + * of a SMBUS_BLOCK message.
> + */
> + if (j == 0 && (pmsg->flags & I2C_M_RECV_LEN))
> + ack = true;
> +
> + rc = diolan_i2c_get_byte_ack(adapter, ack,
> + &byte);
> + if (rc < 0)
> + goto abort;
> + /*
> + * Adjust count if first received byte is length
> + */
> + if (j == 0 && (pmsg->flags & I2C_M_RECV_LEN)) {
> + if (byte == 0
> + || byte > I2C_SMBUS_BLOCK_MAX) {
> + rc = -EREMOTEIO;
> + goto abort;
> + }
> + pmsg->len += byte;
> + }
> + pmsg->buf[j] = byte;
> + }
> + } else {
> + rc = diolan_i2c_put_byte_ack(adapter,
> + (pmsg->addr & 0x7f) << 1);
> + if (rc < 0)
> + goto abort;
> + for (j = 0; j < pmsg->len; j++) {
> + rc = diolan_i2c_put_byte_ack(adapter,
> + pmsg->buf[j]);
> + if (rc < 0)
> + goto abort;
> + }
> + }
> + }
> +abort:
> + diolan_i2c_stop(adapter);
> + return rc;
> +}
> +
> +/*
> + * Return list of supported functionality.
> + */
> +static u32 usb_func(struct i2c_adapter *a)
> +{
> + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
> + I2C_FUNC_SMBUS_READ_BLOCK_DATA;
> +}
please make sure everything is prefixed with dio_ for nicer debugging.
> +static const struct i2c_algorithm usb_algorithm = {
> + .master_xfer = usb_xfer,
> + .functionality = usb_func,
> +};
> +
> +/* device layer */
> +
> +static struct usb_device_id i2c_diolan_u2c_table[] = {
> + {USB_DEVICE(USB_VENDOR_ID_DIOLAN, USB_DEVICE_ID_DIOLAN_U2C)},
spaces between { and text please, same with }
> + {}
> +};
> +
> +MODULE_DEVICE_TABLE(usb, i2c_diolan_u2c_table);
> +
> +static void i2c_diolan_u2c_free(struct i2c_diolan_u2c *dev)
> +{
> + usb_put_dev(dev->usb_dev);
> + kfree(dev);
> +}
> +
> +static int i2c_diolan_u2c_probe(struct usb_interface *interface,
> + const struct usb_device_id *id)
> +{
> + struct i2c_diolan_u2c *dev;
> + int retval = -ENOMEM;
> +
> + /* allocate memory for our device state and initialize it */
> + dev = kzalloc(sizeof(*dev), GFP_KERNEL);
> + if (dev == NULL) {
> + dev_err(&interface->dev, "Out of memory\n");
> + goto error;
> + }
> +
> + dev->usb_dev = usb_get_dev(interface_to_usbdev(interface));
> + dev->interface = interface;
> +
> + /* save our data pointer in this interface device */
> + usb_set_intfdata(interface, dev);
> +
> + dev_info(&interface->dev,
> + "Diolan U2C at bus %03d address %03d\n",
> + dev->usb_dev->bus->busnum, dev->usb_dev->devnum);
> +
> + /* setup i2c adapter description */
> + dev->adapter.owner = THIS_MODULE;
> + dev->adapter.class = I2C_CLASS_HWMON;
> + dev->adapter.algo = &usb_algorithm;
> + dev->adapter.algo_data = dev;
> + snprintf(dev->adapter.name, sizeof(dev->adapter.name),
> + "i2c-u2c-usb at bus %03d device %03d",
> + dev->usb_dev->bus->busnum, dev->usb_dev->devnum);
> +
> + dev->adapter.dev.parent = &dev->interface->dev;
> +
> + diolan_flush_input(dev->usb_dev);
> +
> + /* and finally attach to i2c layer */
> + i2c_add_adapter(&dev->adapter);
> +
> + diolan_fw_version(&dev->adapter);
> +
> + retval = diolan_set_speed(&dev->adapter, U2C_I2C_FREQ_STD);
> + if (retval < 0) {
> + dev_err(&dev->adapter.dev,
> + "failure %d setting I2C bus frequency\n", retval);
> + goto error_del;
> + }
> + diolan_get_serial(&dev->adapter);
> + diolan_scan(&dev->adapter);
do you really need to scan the bus on connection?
> + dev_dbg(&dev->adapter.dev, "connected i2c-u2c-usb device\n");
> +
> + return 0;
> +
> +error_del:
> + i2c_del_adapter(&dev->adapter);
> + i2c_diolan_u2c_free(dev);
> +error:
> + return retval;
> +}
> +
> +static void i2c_diolan_u2c_disconnect(struct usb_interface *interface)
> +{
> + struct i2c_diolan_u2c *dev = usb_get_intfdata(interface);
> +
> + i2c_del_adapter(&dev->adapter);
> + usb_set_intfdata(interface, NULL);
> + i2c_diolan_u2c_free(dev);
> +
> + dev_dbg(&interface->dev, "disconnected\n");
> +}
> +
> +static struct usb_driver i2c_diolan_u2c_driver = {
> + .name = "i2c-u2c-usb",
> + .probe = i2c_diolan_u2c_probe,
> + .disconnect = i2c_diolan_u2c_disconnect,
> + .id_table = i2c_diolan_u2c_table,
> +};
> +
> +static int __init usb_i2c_diolan_u2c_init(void)
> +{
> + /* register this driver with the USB subsystem */
> + return usb_register(&i2c_diolan_u2c_driver);
> +}
> +
> +static void __exit usb_i2c_diolan_u2c_exit(void)
> +{
> + /* deregister this driver with the USB subsystem */
> + usb_deregister(&i2c_diolan_u2c_driver);
> +}
> +
> +module_init(usb_i2c_diolan_u2c_init);
> +module_exit(usb_i2c_diolan_u2c_exit);
> +
> +/* ----- end of usb layer ------------------------------------------------ */
> +
> +MODULE_AUTHOR("Guenter Roeck <[email protected]>");
> +MODULE_DESCRIPTION("i2c-u2c-usb driver");
> +MODULE_LICENSE("GPL");
--
Ben
Q: What's a light-year?
A: One-third less calories than a regular year.
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
