From: Dirk Brandewie <dirk.brande...@gmail.com>

This patch set splits i2c-designware.c core and bus specific portions
in to support the Designware core being behind a PCI device.

The Intel Moorsetown and Medfield SOC's are supported in the PCI
portion of the driver.

This patch set is still a work in progress while I work with Shinya to
make sure I did not break anything on the platform driver side.  The
runtime power management stuff needs more test but doesn't break
anything but I am not sure it's right either. This has been tested on
the Intel Moorestown development platform. 

TODO:
Move the values used for  DW_IC_[FS,SS]_SCL_HCNT
DW_IC_[FS,SS]_SCL_LCNT to be adapter/contoller specific  

Comments/Suggestions gratefully accepted.
--Dirk

Dirk Brandewie (9):
  i2c-designware: Add designware PCI config option
  i2c-designware: Initial split of i2c-designware.c into core and bus
    specific parts
  i2c-designware: retrieve clock frequency based CONFIG_HAVE_CLK
  i2c-designware: Add support for Designware core behind PCI devices.
  i2c-designware: move i2c functionality bit field to be adapter
    specific
  i2c-designware: move controller config to bus specific portion of
    driver
  i2c-designware: Allow mixed endianness accesses
  i2c-designware-pci: Add runtime power management support
  i2c-designware: Support multiple cores using same ISR

 drivers/i2c/busses/Kconfig               |   20 +
 drivers/i2c/busses/Makefile              |    4 +
 drivers/i2c/busses/i2c-designware-core.c |  619 ++++++++++++++++++++++++++++++
 drivers/i2c/busses/i2c-designware-core.h |  214 ++++++++++
 drivers/i2c/busses/i2c-designware-pci.c  |  403 +++++++++++++++++++
 drivers/i2c/busses/i2c-designware-plat.c |  210 ++++++++++
 6 files changed, 1470 insertions(+), 0 deletions(-)
 create mode 100644 drivers/i2c/busses/i2c-designware-core.c
 create mode 100644 drivers/i2c/busses/i2c-designware-core.h
 create mode 100644 drivers/i2c/busses/i2c-designware-pci.c
 create mode 100644 drivers/i2c/busses/i2c-designware-plat.c

-- 
1.7.3.4

--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to