On 2/27/2012 12:57 PM, Laxman Dewangan wrote:
On Monday 27 February 2012 12:51 PM, Shubhrajyoti Datta wrote:
On Fri, Feb 24, 2012 at 5:01 PM, Viresh Kumar<viresh.ku...@st.com> wrote:
From: Vincenzo Frascino<vincenzo.frasc...@st.com>
Add optional i2c_recover_bus() function to the Synopsys DesignWare I2C adapter
driver that performs i2c bus recovery after timeout. The scope of this routine
is to define i2c bus recovery procedure as specified in the i2c protocol Rev. 03
section 3.16 titled "Bus clear".
What do you do in the function ?
Could we have it in the driver file itself?
I think bus recovery mechanism is to send extra clock on SCL line by
toggling the pin (using gpio apis) and keep watching of sda line whether
it becomes high or not.
We can put this algorithms in the some common file (i2c/algos/) and so
if any i2c bus driver want to use, they can use it.
Little background: I am working on tegra i2c controller and we have
similar logic in tegra-i2c driver which we want to upstream.
If similar function is in common place, we can use this and need not to
duplicating it on every bus driver.
I agreed with Laxman, as this is the protocol issue and so it should not
be in each individual driver. It should be the part of framework
itself. We need to implement something like
drivers/i2c/busses/i2c-gpio.c. We need to investigate more on it.
Best Regards
Rajeev
-----------------------------------------------------------------------------------
This email message is for the sole use of the intended recipient(s) and may
contain
confidential information. Any unauthorized review, use, disclosure or
distribution
is prohibited. If you are not the intended recipient, please contact the
sender by
reply email and destroy all copies of the original message.
-----------------------------------------------------------------------------------
.
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
