The resume_noirq enables interrupts one-by-one starting from
first one. Now if the wake up event for suspend came from i2c
device, the i2c bus irq gets enabled before the threaded
i2c device irq, causing a flood of i2c bus interrupts as the
threaded irq that should clear the event is not enabled yet.

Fixed the issue by adding suspend_noirq and resume_early
functions that keep i2c bus interrupts disabled until
resume_noirq has run completely.

Issue was detected doing a wake up from autosleep with
twl4030 power key on N9. Patch tested on N9.

Signed-off-by: Kalle Jokiniemi <kalle.jokini...@jollamobile.com>
---
 drivers/i2c/busses/i2c-omap.c |   34 ++++++++++++++++++++++++++++++++++
 1 files changed, 34 insertions(+), 0 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index a0e49f6..991341b 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1132,6 +1132,36 @@ static int __devexit omap_i2c_remove(struct 
platform_device *pdev)
 }
 
 #ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
+static int omap_i2c_suspend_noirq(struct device *dev)
+{
+
+       struct platform_device *pdev = to_platform_device(dev);
+       struct omap_i2c_dev *_dev = platform_get_drvdata(pdev);
+
+       /* Disabling irq here to balance the enable in resume_early */
+       disable_irq(_dev->irq);
+       return 0;
+}
+
+static int omap_i2c_resume_early(struct device *dev)
+{
+
+       struct platform_device *pdev = to_platform_device(dev);
+       struct omap_i2c_dev *_dev = platform_get_drvdata(pdev);
+
+       /*
+        * The noirq_resume enables the interrupts one by one,
+        * this causes a interrupt flood if the SW irq actually reading
+        * event from i2c device is enabled only after i2c bus irq, as the
+        * irq that should clear the event is still disabled. We have to
+        * keep the bus irq disabled until all other irqs have been enabled.
+        */
+       enable_irq(_dev->irq);
+
+       return 0;
+}
+#endif
 #ifdef CONFIG_PM_RUNTIME
 static int omap_i2c_runtime_suspend(struct device *dev)
 {
@@ -1183,6 +1213,10 @@ static int omap_i2c_runtime_resume(struct device *dev)
 #endif /* CONFIG_PM_RUNTIME */
 
 static struct dev_pm_ops omap_i2c_pm_ops = {
+#ifdef CONFIG_PM_SLEEP
+       .suspend_noirq = omap_i2c_suspend_noirq,
+       .resume_early = omap_i2c_resume_early,
+#endif
        SET_RUNTIME_PM_OPS(omap_i2c_runtime_suspend,
                           omap_i2c_runtime_resume, NULL)
 };
-- 
1.7.4.1

--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to