On Wed, Oct 10, 2012 at 03:43:07PM +0200, ludovic.desroc...@atmel.com wrote:
> + txdesc = chan_tx->device->device_prep_slave_sg(chan_tx, &dma->sg,
> + 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK, NULL);
No, a while back the DMA engine API changed. It no longer takes
DMA_TO_DEVICE/DMA_FROM_DEVICE but DMA_MEM_TO_DEV and DMA_DEV_TO_MEM.
> + /* Keep in mind that we won't use dma to read the last two bytes */
> + at91_twi_irq_save(dev);
> + dma_addr = dma_map_single(dev->dev, dev->buf, dev->buf_len - 2,
> + DMA_FROM_DEVICE);
Ditto.
> + dma->xfer_in_progress = true;
> + cookie = rxdesc->tx_submit(rxdesc);
> + if (dma_submit_error(cookie)) {
tx_submit never errors (anymore.)
> + slave_config.direction = DMA_TO_DEVICE;
Same comment as for the other directions. Note that DMA engine drivers
really should ignore this parameter now, and DMA engine users should phase
it out.
> + if (dmaengine_slave_config(dma->chan_tx, &slave_config)) {
> + dev_err(dev->dev, "failed to configure tx channel\n");
> + ret = -EINVAL;
> + goto error;
> + }
> +
> + slave_config.direction = DMA_FROM_DEVICE;
Ditto.
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
