Dear Tim Michals, [...]
> > The register layout differs. You might want to check if all the register > > programing is correct. Make sure the placement of various bits is > > correct. Also > > see how the DMA operates with the transfer length on MX23 and MX28 ... > > there are > > quite a few differences and I didn't test the driver on MX23 like that. I > > recall > > someone testing it on a different MX23 board but only by some "standard" > > usage. > > OK, will report back in a couple of weeks due holidays and current > assignment load. Ok, it might be better to apply these as they actually fix it on MX28 until you have a proper fix ready. We don't officially support MX23 with this driver anyway. Best regards, Marek Vasut -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
