On Mon, Jul 08, 2013 at 02:45:27PM +0300, Mika Westerberg wrote:
> Some Intel LPSS I2C devices make the *CNT values available from ACPI
> namespace in similar way than the SDA hold value. These values allow
> platform/BIOS to specify the most accurate *CNT values for the device
> driver to use.
>
> So change the ACPI part of the driver to use these values if they exists
> and otherwise use the default method based solely on the input clock speed.
>
> Signed-off-by: Mika Westerberg <mika.westerb...@linux.intel.com>
> ---
> This applies on top of following patch which is not yet in i2c tree:
>
> http://permalink.gmane.org/gmane.linux.drivers.i2c/15754
>
> drivers/i2c/busses/i2c-designware-platdrv.c | 25 +++++++++++++++++++++----
> 1 file changed, 21 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c
> b/drivers/i2c/busses/i2c-designware-platdrv.c
> index c7cfdac..a1488df 100644
> --- a/drivers/i2c/busses/i2c-designware-platdrv.c
> +++ b/drivers/i2c/busses/i2c-designware-platdrv.c
> @@ -59,7 +59,6 @@ static int dw_i2c_acpi_configure(struct platform_device
> *pdev)
> struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
> struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER };
> acpi_handle handle = ACPI_HANDLE(&pdev->dev);
> - acpi_string name;
>
> if (!handle)
> return -ENODEV;
> @@ -68,14 +67,32 @@ static int dw_i2c_acpi_configure(struct platform_device
> *pdev)
> dev->tx_fifo_depth = 32;
> dev->rx_fifo_depth = 32;
>
> - name = dev->master_cfg & DW_IC_CON_SPEED_FAST ? "FMCN" : "SSCN";
> - if (ACPI_SUCCESS(acpi_evaluate_object(handle, name, NULL, &buf))) {
> + /* Standard speed configuration */
> + if (ACPI_SUCCESS(acpi_evaluate_object(handle, "SSCN", NULL, &buf))) {
> union acpi_object *obj = (union acpi_object *)buf.pointer;
>
> if (obj->type == ACPI_TYPE_PACKAGE && obj->package.count == 3) {
> const union acpi_object *objs = obj->package.elements;
>
> - dev->sda_hold_time = (u32)objs[2].integer.value;
> + dev->ss_hcnt = (u16)objs[0].integer.value;
> + dev->ss_lcnt = (u16)objs[1].integer.value;
> + if (!(dev->master_cfg & DW_IC_CON_SPEED_FAST))
> + dev->sda_hold_time = (u32)objs[2].integer.value;
> + }
> +
> + kfree(buf.pointer);
> + }
> + /* Fast speed configuration */
> + if (ACPI_SUCCESS(acpi_evaluate_object(handle, "FMCN", NULL, &buf))) {
There is a problem with the above as it reuses buf from the previous call.
I'll post a new revision of the patches with this fixed.
> + union acpi_object *obj = (union acpi_object *)buf.pointer;
> +
> + if (obj->type == ACPI_TYPE_PACKAGE && obj->package.count == 3) {
> + const union acpi_object *objs = obj->package.elements;
> +
> + dev->fs_hcnt = (u16)objs[0].integer.value;
> + dev->fs_lcnt = (u16)objs[1].integer.value;
> + if (dev->master_cfg & DW_IC_CON_SPEED_FAST)
> + dev->sda_hold_time = (u32)objs[2].integer.value;
> }
>
> kfree(buf.pointer);
> --
> 1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
