Hi Wolfram,
Thank you for the patch.
On Tuesday 17 December 2013 22:44:36 Wolfram Sang wrote:
> From: Wolfram Sang <w...@sang-engineering.com>
>
> I decided to put the pinmuxing into the dtsi file since there is only
> one pinmux posiibility which one probably wants to have when using the
> bus.
>
> Signed-off-by: Wolfram Sang <w...@sang-engineering.com>
> Acked-by: Magnus Damm <d...@opensource.se>
> ---
> arch/arm/boot/dts/r7s72100.dtsi | 102 +++++++++++++++++++++++++++++++++++++
> 1 file changed, 102 insertions(+)
>
> diff --git a/arch/arm/boot/dts/r7s72100.dtsi
> b/arch/arm/boot/dts/r7s72100.dtsi index d396b38..ff0bd6b 100644
> --- a/arch/arm/boot/dts/r7s72100.dtsi
> +++ b/arch/arm/boot/dts/r7s72100.dtsi
> @@ -8,6 +8,8 @@
> * kind, whether express or implied.
> */
>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
> / {
> compatible = "renesas,r7s72100";
> interrupt-parent = <&gic>;
> @@ -15,6 +17,10 @@
> #size-cells = <1>;
>
> aliases {
> + i2c0 = &i2c0;
> + i2c1 = &i2c1;
> + i2c2 = &i2c2;
> + i2c3 = &i2c3;
> gpio0 = &port0;
> gpio1 = &port1;
> gpio2 = &port2;
> @@ -58,6 +64,26 @@
> <0xfcfe7b40 0x04>, /* JPMC */
> <0xfcfe7b90 0x04>, /* JPMCSR */
> <0xfcfe7f00 0x04>; /* JPIBC */
> +
> + riic0_pins: i2c0 {
> + renesas,groups = "riic0_scl_p1_0", "riic0_sda_p1_1";
> + renesas,function = "riic0";
> + };
> +
> + riic1_pins: i2c1 {
> + renesas,groups = "riic1_scl_p1_2", "riic1_sda_p1_3";
> + renesas,function = "riic1";
> + };
> +
> + riic2_pins: i2c2 {
> + renesas,groups = "riic2_scl_p1_4", "riic2_sda_p1_5";
> + renesas,function = "riic2";
> + };
> +
> + riic3_pins: i2c3 {
> + renesas,groups = "riic3_scl_p1_6", "riic3_sda_p1_7";
> + renesas,function = "riic3";
> + };
The SoC allows other options for the I2C pin groups. Instead of declaring all
possible groups here, I think we should thus only add the groups that are
really used to the board .dts files.
> };
>
> port0: gpio@fcfe3100 {
> @@ -187,4 +213,80 @@
> gpio-controller;
> gpio-ranges = <&pfc 0 192 2>;
> };
> +
> + i2c0: i2c@fcfee000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
> + reg = <0xfcfee000 0x44>;
> + interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>,
> + <0 158 IRQ_TYPE_EDGE_RISING>,
> + <0 159 IRQ_TYPE_EDGE_RISING>,
> + <0 160 IRQ_TYPE_LEVEL_HIGH>,
> + <0 161 IRQ_TYPE_LEVEL_HIGH>,
> + <0 162 IRQ_TYPE_LEVEL_HIGH>,
> + <0 163 IRQ_TYPE_LEVEL_HIGH>,
> + <0 164 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-0 = <&riic0_pins>;
> + pinctrl-names = "default";
These two properties should then be moved to the board .dts files as well.
> + clock-frequency = <100000>;
Isn't that a board-specific property ?
> + status = "disabled";
> + };
> +
> + i2c1: i2c@fcfee400 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
> + reg = <0xfcfee400 0x44>;
> + interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>,
> + <0 166 IRQ_TYPE_EDGE_RISING>,
> + <0 167 IRQ_TYPE_EDGE_RISING>,
> + <0 168 IRQ_TYPE_LEVEL_HIGH>,
> + <0 169 IRQ_TYPE_LEVEL_HIGH>,
> + <0 170 IRQ_TYPE_LEVEL_HIGH>,
> + <0 171 IRQ_TYPE_LEVEL_HIGH>,
> + <0 172 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-0 = <&riic1_pins>;
> + pinctrl-names = "default";
> + clock-frequency = <100000>;
> + status = "disabled";
> + };
> +
> + i2c2: i2c@fcfee800 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
> + reg = <0xfcfee800 0x44>;
> + interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>,
> + <0 174 IRQ_TYPE_EDGE_RISING>,
> + <0 175 IRQ_TYPE_EDGE_RISING>,
> + <0 176 IRQ_TYPE_LEVEL_HIGH>,
> + <0 177 IRQ_TYPE_LEVEL_HIGH>,
> + <0 178 IRQ_TYPE_LEVEL_HIGH>,
> + <0 179 IRQ_TYPE_LEVEL_HIGH>,
> + <0 180 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-0 = <&riic2_pins>;
> + pinctrl-names = "default";
> + clock-frequency = <100000>;
> + status = "disabled";
> + };
> +
> + i2c3: i2c@fcfeec00 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
> + reg = <0xfcfeec00 0x44>;
> + interrupts = <0 181 IRQ_TYPE_LEVEL_HIGH>,
> + <0 182 IRQ_TYPE_EDGE_RISING>,
> + <0 183 IRQ_TYPE_EDGE_RISING>,
> + <0 184 IRQ_TYPE_LEVEL_HIGH>,
> + <0 185 IRQ_TYPE_LEVEL_HIGH>,
> + <0 186 IRQ_TYPE_LEVEL_HIGH>,
> + <0 187 IRQ_TYPE_LEVEL_HIGH>,
> + <0 188 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-0 = <&riic3_pins>;
> + pinctrl-names = "default";
> + clock-frequency = <100000>;
> + status = "disabled";
> + };
> };
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
