On 16/02/14 09:46, Wolfram Sang wrote:
On Sun, Jan 26, 2014 at 04:05:34PM +0000, Ben Dooks wrote:
The i2c-rcar driver currently prints an error message if the master_xfer
callback fails. However if the bus is being probed then lots of NAKs
will be generated, causing the output of a number of errors printed.
To solve this, disable the print if the error is not -EREMOTEIO.
An example of running i2cdetect:
So, after this patch i2cdetect runs fine for you? I assume you are
working with the lager/r8a7790 board? With koelsch/r8a7791, it stalls
the bus :(
It runs fine most of the time, however I've seen some issues with the
bus locking up. However it seems to be random and affects either of
bus 2 or bus 3 randomly. Once the bus does lock up then there is no
possibility of further transfers.
I am trying to put together a breakout board to get at the signals
involved as they are all pretty much only available on high-density
connectors.
I hope to have a look at this before the end of the week and see if
there is a fix for this.
--
Ben Dooks http://www.codethink.co.uk/
Senior Engineer Codethink - Providing Genius
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
