On Tuesday 02 June 2015 10:22 PM, Vaibhav Hiremath wrote:
On Thursday 28 May 2015 06:53 PM, Russell King - ARM Linux wrote:
On Thu, May 28, 2015 at 06:33:44PM +0530, Vaibhav Hiremath wrote:
From: Yi Zhang <[email protected]>
Enable i2c module/unit before transmission and disable when it finishes.
why?
It's because the i2c bus may be distrubed if the slave device,
typically a touch, powers on.
"disturbed"
I'd recommend that this is a DT property - not every platform is going to
want this, and as there is rudimentary I2C slave support in this driver,
this change breaks that.
I would take it as two different comments here, and I believe you also
meant same,
1. Not breaking I2C slave support
Not sure whether enabling/disabling module in ISR would suffice here.
To be specific, in the functions i2c_pxa_slave_start() &
i2c_pxa_slave_stop()
Please ignore this option, as enable is important to generate interrupt
on slave start.
I will add DT property with clear note on SLAVE support issue, so that
it can be disabled and SLAVE support should work as is.
Thanks,
Vaibhav
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
