From: Wolfram Sang <wsa+rene...@sang-engineering.com> I copied the wrong shell code into the documentation. Sorry to all who tried to get sense out of this current example :/ Slight rewording while we are here.
Reported-by: Tim Bakker <bakk...@mymail.vcu.edu> Signed-off-by: Wolfram Sang <wsa+rene...@sang-engineering.com> --- Documentation/i2c/slave-interface | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/i2c/slave-interface b/Documentation/i2c/slave-interface index 02b086510b6c10..2dee4e2d62df19 100644 --- a/Documentation/i2c/slave-interface +++ b/Documentation/i2c/slave-interface @@ -31,10 +31,10 @@ User manual =========== I2C slave backends behave like standard I2C clients. So, you can instantiate -them like described in the document 'instantiating-devices'. A quick example -for instantiating the slave-eeprom driver from userspace: +them as described in the document 'instantiating-devices'. A quick example for +instantiating the slave-eeprom driver from userspace at address 0x64 on bus 1: - # echo 0-0064 > /sys/bus/i2c/drivers/i2c-slave-eeprom/bind + # echo slave-24c02 0x64 > /sys/bus/i2c/devices/i2c-1/new_device Each backend should come with separate documentation to describe its specific behaviour and setup. -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html