On Thu, Jun 18, 2015 at 12:22:33PM -0400, Murali Karicheri wrote: > On 06/18/2015 05:00 AM, Sekhar Nori wrote: > >On Thursday 18 June 2015 02:23 PM, Alexander Sverdlin wrote: > >>According to KeyStone Architecture I2C User Guide, > >> > >> module clock frequency > >>master clock frequency = ---------------------- > >> (ICCL + 6) + (ICCH + 6) > >> > >>i.e. "d" in i2c_davinci_calc_clk_dividers() should be fixed and > >>not dependent from module clock prescaler PSC on these SoCs. > >> > >>Signed-off-by: Alexander Sverdlin <[email protected]> > >>--- > >> > >>RFC: If someone from TI has an idea how to improve the coverage of future > >>Keystone > >>revisions -- hints/patches are welcome. The current ID check is based on > >>Davinci/Keystone datasheets and is at least working on real Keystone II. > > > >+ Murali who works on Keystone devices in TI. > > + Grygorii > > + Grygorii has been involved in the Keystone related enhancement and > reviewing prior patches. Need to have his ack for this change
Any news?
>
> Murali
> >
> >>
> >> drivers/i2c/busses/i2c-davinci.c | 10 ++++++++++
> >> 1 files changed, 10 insertions(+), 0 deletions(-)
> >>
> >>diff --git a/drivers/i2c/busses/i2c-davinci.c
> >>b/drivers/i2c/busses/i2c-davinci.c
> >>index 4a110af..3d78f6a 100644
> >>--- a/drivers/i2c/busses/i2c-davinci.c
> >>+++ b/drivers/i2c/busses/i2c-davinci.c
> >>@@ -60,6 +60,8 @@
> >> #define DAVINCI_I2C_IVR_REG 0x28
> >> #define DAVINCI_I2C_EMDR_REG 0x2c
> >> #define DAVINCI_I2C_PSC_REG 0x30
> >>+#define DAVINCI_I2C_ICPID1_REG 0x34
> >>+#define DAVINCI_I2C_ICPID2_REG 0x38
> >> #define DAVINCI_I2C_FUNC_REG 0x48
> >> #define DAVINCI_I2C_DIR_REG 0x4c
> >> #define DAVINCI_I2C_DIN_REG 0x50
> >>@@ -203,6 +205,9 @@ static void i2c_davinci_calc_clk_dividers(struct
> >>davinci_i2c_dev *dev)
> >> * where if PSC == 0, d = 7,
> >> * if PSC == 1, d = 6
> >> * if PSC > 1 , d = 5
> >>+ *
> >>+ * Note:
> >>+ * d is always 6 on Keystone I2C controller
> >> */
> >>
> >> /* get minimum of 7 MHz clock, but max of 12 MHz */
> >>@@ -211,6 +216,11 @@ static void i2c_davinci_calc_clk_dividers(struct
> >>davinci_i2c_dev *dev)
> >> psc++; /* better to run under spec than over */
> >> d = (psc >= 2) ? 5 : 7 - psc;
> >>
> >>+ if (davinci_i2c_read_reg(dev, DAVINCI_I2C_ICPID2_REG) == 0x2206) {
> >>+ dev_dbg(dev->dev, "Keystone SoC detected\n");
> >>+ d = 6;
> >>+ }
> >
> >I think its better to use a different compatible string for i2c on
> >keystone devices rather than using a fixed hardcoded IP version.
> >
> >Thanks,
> >Sekhar
> >
>
>
> --
> Murali Karicheri
> Linux Kernel, Keystone
signature.asc
Description: Digital signature
