On Sat, 2015-11-07 at 12:35 +0100, Christian Fetzer wrote:
> Request the SMBus base address index region once in piix4_probe. This
> is particularly useful when using the multiplexed adapter in SB800 as
> it avoids requesting and releasing the region on every transfer.
>
> Signed-off-by: Christian Fetzer <[email protected]>
> ---
> drivers/i2c/busses/i2c-piix4.c | 37 ++++++++++++++++++++++++------
> -------
> 1 file changed, 24 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-
> piix4.c
> index 0e4ae60..67ada1e 100644
> --- a/drivers/i2c/busses/i2c-piix4.c
> +++ b/drivers/i2c/busses/i2c-piix4.c
> @@ -78,6 +78,9 @@
> /* Multi-port constants */
> #define PIIX4_MAX_ADAPTERS 4
>
> +/* SB800 constants */
> +#define SB800_PIIX4_SMB_IDX 0xCD6
Small letters for value?
> +
> /* insmod parameters */
>
> /* If force is set to anything different from 0, we forcibly enable
> the
> @@ -125,6 +128,9 @@ static const struct dmi_system_id piix4_dmi_ibm[]
> = {
> { },
> };
>
> +/* SB800 globals */
> +static bool piix4_smb_idx_sb800;
> +
By the way, could it be part of driver data, i.e. member of struct
i2c_piix4_adapdata?
>
> struct i2c_piix4_adapdata {
> unsigned short smba;
> };
> @@ -232,7 +238,6 @@ static int piix4_setup_sb800(struct pci_dev
> *PIIX4_dev,
> const struct pci_device_id *id, u8 aux)
> {
> unsigned short piix4_smba;
> - unsigned short smba_idx = 0xcd6;
> u8 smba_en_lo, smba_en_hi, smb_en, smb_en_status;
> u8 i2ccfg, i2ccfg_offset = 0x10;
>
> @@ -254,16 +259,10 @@ static int piix4_setup_sb800(struct pci_dev
> *PIIX4_dev,
> else
> smb_en = (aux) ? 0x28 : 0x2c;
>
> - if (!request_region(smba_idx, 2, "smba_idx")) {
> - dev_err(&PIIX4_dev->dev, "SMBus base address index
> region "
> - "0x%x already in use!\n", smba_idx);
> - return -EBUSY;
> - }
> - outb_p(smb_en, smba_idx);
> - smba_en_lo = inb_p(smba_idx + 1);
> - outb_p(smb_en + 1, smba_idx);
> - smba_en_hi = inb_p(smba_idx + 1);
> - release_region(smba_idx, 2);
> + outb_p(smb_en, SB800_PIIX4_SMB_IDX);
> + smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1);
> + outb_p(smb_en + 1, SB800_PIIX4_SMB_IDX);
> + smba_en_hi = inb_p(SB800_PIIX4_SMB_IDX + 1);
>
> if (!smb_en) {
> smb_en_status = smba_en_lo & 0x10;
> @@ -621,11 +620,20 @@ static int piix4_probe(struct pci_dev *dev,
> const struct pci_device_id *id)
> if ((dev->vendor == PCI_VENDOR_ID_ATI &&
> dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS &&
> dev->revision >= 0x40) ||
> - dev->vendor == PCI_VENDOR_ID_AMD)
> + dev->vendor == PCI_VENDOR_ID_AMD) {
> + if (!request_region(SB800_PIIX4_SMB_IDX, 2,
> "smba_idx")) {
> + dev_err(&dev->dev,
> + "SMBus base address index region 0x%x
> already in use!\n",
> + SB800_PIIX4_SMB_IDX);
> + return -EBUSY;
> + }
> + piix4_smb_idx_sb800 = true;
> +
> /* base address location etc changed in SB800 */
> retval = piix4_setup_sb800(dev, id, 0);
> - else
> + } else {
> retval = piix4_setup(dev, id);
> + }
>
> /* If no main SMBus found, give up */
> if (retval < 0)
> @@ -692,6 +700,9 @@ static void piix4_remove(struct pci_dev *dev)
> piix4_adap_remove(piix4_aux_adapter, true);
> piix4_aux_adapter = NULL;
> }
> +
> + if (piix4_smb_idx_sb800)
> + release_region(SB800_PIIX4_SMB_IDX, 2);
> }
>
> static struct pci_driver piix4_driver = {
--
Andy Shevchenko <[email protected]>
Intel Finland Oy
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
