Altix patch to add an SN pci provider files for TIOCE, which is SGI's
PCI Express implementation.
Signed-off-by: Mark Maule <[EMAIL PROTECTED]>
Index: ce-submit2/arch/ia64/sn/pci/tioce_provider.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ ce-submit2/arch/ia64/sn/pci/tioce_provider.c 2005-08-05
15:53:40.214261351 -0500
@@ -0,0 +1,732 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003-2005 Silicon Graphics, Inc. All Rights Reserved.
+ */
+
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <asm/sn/sn_sal.h>
+#include <asm/sn/addrs.h>
+#include <asm/sn/pcidev.h>
+#include <asm/sn/pcibus_provider_defs.h>
+#include <asm/sn/tioce_provider.h>
+
+/**
+ * Bus address ranges for the 5 flavors of TIOCE DMA
+ */
+
+#define TIOCE_D64_MIN 0x8000000000000000UL
+#define TIOCE_D64_MAX 0xffffffffffffffffUL
+#define TIOCE_D64_ADDR(a) ((a) >= TIOCE_D64_MIN)
+
+#define TIOCE_D32_MIN 0x0000000080000000UL
+#define TIOCE_D32_MAX 0x00000000ffffffffUL
+#define TIOCE_D32_ADDR(a) ((a) >= TIOCE_D32_MIN && (a) <= TIOCE_D32_MAX)
+
+#define TIOCE_M32_MIN 0x0000000000000000UL
+#define TIOCE_M32_MAX 0x000000007fffffffUL
+#define TIOCE_M32_ADDR(a) ((a) >= TIOCE_M32_MIN && (a) <= TIOCE_M32_MAX)
+
+#define TIOCE_M40_MIN 0x0000004000000000UL
+#define TIOCE_M40_MAX 0x0000007fffffffffUL
+#define TIOCE_M40_ADDR(a) ((a) >= TIOCE_M40_MIN && (a) <= TIOCE_M40_MAX)
+
+#define TIOCE_M40S_MIN 0x0000008000000000UL
+#define TIOCE_M40S_MAX 0x000000ffffffffffUL
+#define TIOCE_M40S_ADDR(a) ((a) >= TIOCE_M40S_MIN && (a) <= TIOCE_M40S_MAX)
+
+/*
+ * ATE manipulation macros.
+ */
+
+#define ATE_PAGESHIFT(ps) (__ffs(ps))
+#define ATE_PAGEMASK(ps) ((ps)-1)
+
+#define ATE_PAGE(x, ps) ((x) >> ATE_PAGESHIFT(ps))
+#define ATE_NPAGES(start, len, pagesize) \
+ (ATE_PAGE((start)+(len)-1, pagesize) - ATE_PAGE(start, pagesize) + 1)
+
+#define ATE_VALID(ate) ((ate) & (1UL << 63))
+#define ATE_MAKE(addr, ps) (((addr) & ~ATE_PAGEMASK(ps)) | (1UL << 63))
+
+/*
+ * Flavors of ate-based mapping supported by tioce_alloc_map()
+ */
+
+#define TIOCE_ATE_M32 1
+#define TIOCE_ATE_M40 2
+#define TIOCE_ATE_M40S 3
+
+#define KB(x) ((x) << 10)
+#define MB(x) ((x) << 20)
+#define GB(x) ((x) << 30)
+
+/**
+ * tioce_dma_d64 - create a DMA mapping using 64-bit direct mode
+ * @ct_addr: system coretalk address
+ *
+ * Map @ct_addr into 64-bit CE bus space. No device context is necessary
+ * and no CE mapping are consumed.
+ *
+ * Bits 53:0 come from the coretalk address. The remaining bits are set as
+ * follows:
+ *
+ * 63 - must be 1 to indicate d64 mode to CE hardware
+ * 62 - barrier bit ... controlled with tioce_dma_barrier()
+ * 61 - 0 since this is not an MSI transaction
+ * 60:54 - reserved, MBZ
+ */
+static uint64_t tioce_dma_d64(unsigned long ct_addr)
+{
+ uint64_t bus_addr;
+
+ bus_addr = ct_addr | (1UL << 63);
+
+ return bus_addr;
+}
+
+/**
+ * pcidev_to_tioce - return misc ce related pointers given a pci_dev
+ * @pci_dev: pci device context
+ * @base: ptr to store struct tioce_mmr * for the CE holding this device
+ * @kernel: ptr to store struct tioce_kernel * for the CE holding this device
+ * @port: ptr to store the CE port number that this device is on
+ *
+ * Return pointers to various CE-related structures for the CE upstream of
+ * @pci_dev.
+ */
+static inline void
+pcidev_to_tioce(struct pci_dev *pdev, struct tioce **base,
+ struct tioce_kernel **kernel, int *port)
+{
+ struct pcidev_info *pcidev_info;
+ struct tioce_common *ce_common;
+ struct tioce_kernel *ce_kernel;
+
+ pcidev_info = SN_PCIDEV_INFO(pdev);
+ ce_common = (struct tioce_common *)pcidev_info->pdi_pcibus_info;
+ ce_kernel = (struct tioce_kernel *)ce_common->ce_kernel_private;
+
+ if (base)
+ *base = (struct tioce *)ce_common->ce_pcibus.bs_base;
+ if (kernel)
+ *kernel = ce_kernel;
+
+ /*
+ * we use port as a zero-based value internally, even though the
+ * documentation is 1-based.
+ */
+ if (port)
+ *port =
+ (pdev->bus->number < ce_kernel->ce_port1_secondary) ? 0 : 1;
+}
+
+/**
+ * tioce_alloc_map - Given a coretalk address, map it to pcie bus address
+ * space using one of the various ATE-based address modes.
+ * @ce_kern: tioce context
+ * @type: map mode to use
+ * @port: 0-based port that the requesting device is downstream of
+ * @ct_addr: the coretalk address to map
+ * @len: number of bytes to map
+ *
+ * Given the addressing type, set up various paramaters that define the
+ * ATE pool to use. Search for a contiguous block of entries to cover the
+ * length, and if enough resources exist, fill in the ATE's and construct a
+ * tioce_dmamap struct to track the mapping.
+ */
+static uint64_t
+tioce_alloc_map(struct tioce_kernel *ce_kern, int type, int port,
+ uint64_t ct_addr, int len)
+{
+ int i;
+ int j;
+ int first;
+ int last;
+ int entries;
+ int nates;
+ int pagesize;
+ uint64_t *ate_shadow;
+ uint64_t *ate_reg;
+ uint64_t addr;
+ struct tioce *ce_mmr;
+ uint64_t bus_base;
+ struct tioce_dmamap *map;
+
+ ce_mmr = (struct tioce *)ce_kern->ce_common->ce_pcibus.bs_base;
+
+ switch (type) {
+ case TIOCE_ATE_M32:
+ /*
+ * The first 64 entries of the ate3240 pool are dedicated to
+ * super-page (TIOCE_ATE_M40S) mode.
+ */
+ first = 64;
+ entries = TIOCE_NUM_M3240_ATES - 64;
+ ate_shadow = ce_kern->ce_ate3240_shadow;
+ ate_reg = ce_mmr->ce_ure_ate3240;
+ pagesize = ce_kern->ce_ate3240_pagesize;
+ bus_base = TIOCE_M32_MIN;
+ break;
+ case TIOCE_ATE_M40:
+ first = 0;
+ entries = TIOCE_NUM_M40_ATES;
+ ate_shadow = ce_kern->ce_ate40_shadow;
+ ate_reg = ce_mmr->ce_ure_ate40;
+ pagesize = MB(64);
+ bus_base = TIOCE_M40_MIN;
+ break;
+ case TIOCE_ATE_M40S:
+ /*
+ * ate3240 entries 0-31 are dedicated to port1 super-page
+ * mappings. ate3240 entries 32-63 are dedicated to port2.
+ */
+ first = port * 32;
+ entries = 32;
+ ate_shadow = ce_kern->ce_ate3240_shadow;
+ ate_reg = ce_mmr->ce_ure_ate3240;
+ pagesize = GB(16);
+ bus_base = TIOCE_M40S_MIN;
+ break;
+ default:
+ return 0;
+ }
+
+ nates = ATE_NPAGES(ct_addr, len, pagesize);
+ if (nates > entries)
+ return 0;
+
+ last = first + entries - nates;
+ for (i = first; i <= last; i++) {
+ if (ATE_VALID(ate_shadow[i]))
+ continue;
+
+ for (j = i; j < i + nates; j++)
+ if (ATE_VALID(ate_shadow[j]))
+ break;
+
+ if (j >= i + nates)
+ break;
+ }
+
+ if (i > last)
+ return 0;
+
+ map = kcalloc(1, sizeof(struct tioce_dmamap), GFP_ATOMIC);
+ if (!map)
+ return 0;
+
+ addr = ct_addr;
+ for (j = 0; j < nates; j++) {
+ uint64_t ate;
+
+ ate = ATE_MAKE(addr, pagesize);
+ ate_shadow[i + j] = ate;
+ ate_reg[i + j] = ate;
+ addr += pagesize;
+ }
+
+ map->refcnt = 1;
+ map->nbytes = nates * pagesize;
+ map->ct_start = ct_addr & ~ATE_PAGEMASK(pagesize);
+ map->pci_start = bus_base + (i * pagesize);
+ map->ate_hw = &ate_reg[i];
+ map->ate_shadow = &ate_shadow[i];
+ map->ate_count = nates;
+
+ list_add(&map->ce_dmamap_list, &ce_kern->ce_dmamap_list);
+
+ return (map->pci_start + (ct_addr - map->ct_start));
+}
+
+/**
+ * tioce_dma_d32 - create a DMA mapping using 32-bit direct mode
+ * @pdev: linux pci_dev representing the function
+ * @paddr: system physical address
+ *
+ * Map @paddr into 32-bit bus space of the CE associated with @pcidev_info.
+ */
+static uint64_t tioce_dma_d32(struct pci_dev *pdev, uint64_t ct_addr)
+{
+ int dma_ok;
+ int port;
+ struct tioce *ce_mmr;
+ struct tioce_kernel *ce_kern;
+ uint64_t ct_upper;
+ uint64_t ct_lower;
+ dma_addr_t bus_addr;
+
+ ct_upper = ct_addr & ~0x3fffffffUL;
+ ct_lower = ct_addr & 0x3fffffffUL;
+
+ pcidev_to_tioce(pdev, &ce_mmr, &ce_kern, &port);
+
+ if (ce_kern->ce_port[port].dirmap_refcnt == 0) {
+ volatile uint64_t tmp;
+
+ ce_kern->ce_port[port].dirmap_shadow = ct_upper;
+ ce_mmr->ce_ure_dir_map[port] = ct_upper;
+ tmp = ce_mmr->ce_ure_dir_map[port];
+ dma_ok = 1;
+ } else
+ dma_ok = (ce_kern->ce_port[port].dirmap_shadow == ct_upper);
+
+ if (dma_ok) {
+ ce_kern->ce_port[port].dirmap_refcnt++;
+ bus_addr = TIOCE_D32_MIN + ct_lower;
+ } else
+ bus_addr = 0;
+
+ return bus_addr;
+}
+
+/**
+ * tioce_dma_barrier - swizzle a TIOCE bus address to include or exclude
+ * the barrier bit.
+ * @bus_addr: bus address to swizzle
+ *
+ * Given a TIOCE bus address, set the appropriate bit to indicate barrier
+ * attributes.
+ */
+static uint64_t tioce_dma_barrier(uint64_t bus_addr, int on)
+{
+ uint64_t barrier_bit;
+
+ /* barrier not supported in M40/M40S mode */
+ if (TIOCE_M40_ADDR(bus_addr) || TIOCE_M40S_ADDR(bus_addr))
+ return bus_addr;
+
+ if (TIOCE_D64_ADDR(bus_addr))
+ barrier_bit = (1UL << 62);
+ else /* must be m32 or d32 */
+ barrier_bit = (1UL << 30);
+
+ return (on) ? (bus_addr | barrier_bit) : (bus_addr & ~barrier_bit);
+}
+
+/**
+ * tioce_dma_unmap - release CE mapping resources
+ * @pdev: linux pci_dev representing the function
+ * @bus_addr: bus address returned by an earlier tioce_dma_map
+ * @dir: mapping direction (unused)
+ *
+ * Locate mapping resources associated with @bus_addr and release them.
+ * For mappings created using the direct modes there are no resources
+ * to release.
+ */
+void tioce_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir)
+{
+ int i;
+ int port;
+ struct tioce_kernel *ce_kern;
+ struct tioce *ce_mmr;
+ unsigned long flags;
+
+ bus_addr = tioce_dma_barrier(bus_addr, 0);
+ pcidev_to_tioce(pdev, &ce_mmr, &ce_kern, &port);
+
+ /* nothing to do for D64 */
+
+ if (TIOCE_D64_ADDR(bus_addr))
+ return;
+
+ spin_lock_irqsave(&ce_kern->ce_lock, flags);
+
+ if (TIOCE_D32_ADDR(bus_addr)) {
+ if (--ce_kern->ce_port[port].dirmap_refcnt == 0) {
+ ce_kern->ce_port[port].dirmap_shadow = 0;
+ ce_mmr->ce_ure_dir_map[port] = 0;
+ }
+ } else {
+ struct tioce_dmamap *map;
+
+ list_for_each_entry(map, &ce_kern->ce_dmamap_list,
+ ce_dmamap_list) {
+ uint64_t last;
+
+ last = map->pci_start + map->nbytes - 1;
+ if (bus_addr >= map->pci_start && bus_addr <= last)
+ break;
+ }
+
+ if (&map->ce_dmamap_list == &ce_kern->ce_dmamap_list) {
+ printk(KERN_WARNING
+ "%s: %s - no map found for bus_addr 0x%lx\n",
+ __FUNCTION__, pci_name(pdev), bus_addr);
+ } else if (--map->refcnt == 0) {
+ for (i = 0; i < map->ate_count; i++) {
+ map->ate_shadow[i] = 0;
+ map->ate_hw[i] = 0;
+ }
+
+ list_del(&map->ce_dmamap_list);
+ kfree(map);
+ }
+ }
+
+ spin_unlock_irqrestore(&ce_kern->ce_lock, flags);
+}
+
+/**
+ * tioce_do_dma_map - map pages for PCI DMA
+ * @pdev: linux pci_dev representing the function
+ * @paddr: host physical address to map
+ * @byte_count: bytes to map
+ *
+ * This is the main wrapper for mapping host physical pages to CE PCI space.
+ * The mapping mode used is based on the device's dma_mask.
+ */
+static uint64_t
+tioce_do_dma_map(struct pci_dev *pdev, uint64_t paddr, size_t byte_count,
+ int barrier)
+{
+ unsigned long flags;
+ uint64_t ct_addr;
+ uint64_t mapaddr = 0;
+ struct tioce_kernel *ce_kern;
+ struct tioce_dmamap *map;
+ int port;
+ uint64_t dma_mask;
+
+ dma_mask = (barrier) ? pdev->dev.coherent_dma_mask : pdev->dma_mask;
+
+ /* cards must be able to address at least 31 bits */
+ if (dma_mask < 0x7fffffffUL)
+ return 0;
+
+ ct_addr = PHYS_TO_TIODMA(paddr);
+
+ /*
+ * If the device can generate 64 bit addresses, create a D64 map.
+ * Since this should never fail, bypass the rest of the checks.
+ */
+ if (dma_mask == ~0UL) {
+ mapaddr = tioce_dma_d64(ct_addr);
+ goto dma_map_done;
+ }
+
+ pcidev_to_tioce(pdev, NULL, &ce_kern, &port);
+
+ spin_lock_irqsave(&ce_kern->ce_lock, flags);
+
+ /*
+ * D64 didn't work ... See if we have an existing map that covers
+ * this address range. Must account for devices dma_mask here since
+ * an existing map might have been done in a mode using more pci
+ * address bits than this device can support.
+ */
+ list_for_each_entry(map, &ce_kern->ce_dmamap_list, ce_dmamap_list) {
+ uint64_t last;
+
+ last = map->ct_start + map->nbytes - 1;
+ if (ct_addr >= map->ct_start &&
+ ct_addr + byte_count - 1 <= last &&
+ map->pci_start <= dma_mask) {
+ map->refcnt++;
+ mapaddr = map->pci_start + (ct_addr - map->ct_start);
+ break;
+ }
+ }
+
+ /*
+ * If we don't have a map yet, and the card can generate 40
+ * bit addresses, try the M40/M40S modes. Note these modes do not
+ * support a barrier bit, so if we need a consistent map these
+ * won't work.
+ */
+ if (!mapaddr && !barrier && dma_mask >= 0xffffffffffUL) {
+ /*
+ * We have two options for 40-bit mappings: 16GB "super" ATE's
+ * and 64MB "regular" ATE's. We'll try both if needed for a
+ * given mapping but which one we try first depends on the
+ * size. For requests >64MB, prefer to use a super page with
+ * regular as the fallback. Otherwise, try in the reverse order.
+ */
+
+ if (byte_count > MB(64)) {
+ mapaddr = tioce_alloc_map(ce_kern, TIOCE_ATE_M40S,
+ port, ct_addr, byte_count);
+ if (!mapaddr)
+ mapaddr =
+ tioce_alloc_map(ce_kern, TIOCE_ATE_M40, -1,
+ ct_addr, byte_count);
+ } else {
+ mapaddr = tioce_alloc_map(ce_kern, TIOCE_ATE_M40, -1,
+ ct_addr, byte_count);
+ if (!mapaddr)
+ mapaddr =
+ tioce_alloc_map(ce_kern, TIOCE_ATE_M40S,
+ port, ct_addr, byte_count);
+ }
+ }
+
+ /*
+ * 32-bit direct is the next mode to try
+ */
+ if (!mapaddr && dma_mask >= 0xffffffffUL)
+ mapaddr = tioce_dma_d32(pdev, ct_addr);
+
+ /*
+ * Last resort, try 32-bit ATE-based map.
+ */
+ if (!mapaddr)
+ mapaddr =
+ tioce_alloc_map(ce_kern, TIOCE_ATE_M32, -1, ct_addr,
+ byte_count);
+
+ spin_unlock_irqrestore(&ce_kern->ce_lock, flags);
+
+dma_map_done:
+ if (mapaddr & barrier)
+ mapaddr = tioce_dma_barrier(mapaddr, 1);
+
+ return mapaddr;
+}
+
+/**
+ * tioce_dma - standard pci dma map interface
+ * @pdev: pci device requesting the map
+ * @paddr: system physical address to map into pci space
+ * @byte_count: # bytes to map
+ *
+ * Simply call tioce_do_dma_map() to create a map with the barrier bit clear
+ * in the address.
+ */
+static uint64_t
+tioce_dma(struct pci_dev *pdev, uint64_t paddr, size_t byte_count)
+{
+ return tioce_do_dma_map(pdev, paddr, byte_count, 0);
+}
+
+/**
+ * tioce_dma_consistent - consistent pci dma map interface
+ * @pdev: pci device requesting the map
+ * @paddr: system physical address to map into pci space
+ * @byte_count: # bytes to map
+ *
+ * Simply call tioce_do_dma_map() to create a map with the barrier bit set
+ * in the address.
+ */ static uint64_t
+tioce_dma_consistent(struct pci_dev *pdev, uint64_t paddr, size_t byte_count)
+{
+ return tioce_do_dma_map(pdev, paddr, byte_count, 1);
+}
+
+/**
+ * tioce_error_intr_handler - SGI TIO CE error interrupt handler
+ * @irq: unused
+ * @arg: pointer to tioce_common struct for the given CE
+ * @pt: unused
+ *
+ * Handle a CE error interrupt. Simply a wrapper around a SAL call which
+ * defers processing to the SGI prom.
+ */ static irqreturn_t
+tioce_error_intr_handler(int irq, void *arg, struct pt_regs *pt)
+{
+ struct tioce_common *soft = arg;
+ struct ia64_sal_retval ret_stuff;
+ ret_stuff.status = 0;
+ ret_stuff.v0 = 0;
+
+ SAL_CALL_NOLOCK(ret_stuff, (u64) SN_SAL_IOIF_ERROR_INTERRUPT,
+ soft->ce_pcibus.bs_persist_segment,
+ soft->ce_pcibus.bs_persist_busnum, 0, 0, 0, 0, 0);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * tioce_kern_init - init kernel structures related to a given TIOCE
+ * @tioce_common: ptr to a cached tioce_common struct that originated in prom
+ */ static struct tioce_kernel *
+tioce_kern_init(struct tioce_common *tioce_common)
+{
+ int i;
+ uint32_t tmp;
+ struct tioce *tioce_mmr;
+ struct tioce_kernel *tioce_kern;
+
+ tioce_kern = kcalloc(1, sizeof(struct tioce_kernel), GFP_KERNEL);
+ if (!tioce_kern) {
+ return NULL;
+ }
+
+ tioce_kern->ce_common = tioce_common;
+ spin_lock_init(&tioce_kern->ce_lock);
+ INIT_LIST_HEAD(&tioce_kern->ce_dmamap_list);
+ tioce_common->ce_kernel_private = (uint64_t) tioce_kern;
+
+ /*
+ * Determine the secondary bus number of the port2 logical PPB.
+ * This is used to decide whether a given pci device resides on
+ * port1 or port2. Note: We don't have enough plumbing set up
+ * here to use pci_read_config_xxx() so use the raw_pci_ops vector.
+ */
+
+ raw_pci_ops->read(tioce_common->ce_pcibus.bs_persist_segment,
+ tioce_common->ce_pcibus.bs_persist_busnum,
+ PCI_DEVFN(2, 0), PCI_SECONDARY_BUS, 1, &tmp);
+ tioce_kern->ce_port1_secondary = (uint8_t) tmp;
+
+ /*
+ * Set PMU pagesize to the largest size available, and zero out
+ * the ate's.
+ */
+
+ tioce_mmr = (struct tioce *)tioce_common->ce_pcibus.bs_base;
+ tioce_mmr->ce_ure_page_map &= ~CE_URE_PAGESIZE_MASK;
+ tioce_mmr->ce_ure_page_map |= CE_URE_256K_PAGESIZE;
+ tioce_kern->ce_ate3240_pagesize = KB(256);
+
+ for (i = 0; i < TIOCE_NUM_M40_ATES; i++) {
+ tioce_kern->ce_ate40_shadow[i] = 0;
+ tioce_mmr->ce_ure_ate40[i] = 0;
+ }
+
+ for (i = 0; i < TIOCE_NUM_M3240_ATES; i++) {
+ tioce_kern->ce_ate3240_shadow[i] = 0;
+ tioce_mmr->ce_ure_ate3240[i] = 0;
+ }
+
+ return tioce_kern;
+}
+
+/**
+ * tioce_force_interrupt - implement altix force_interrupt() backend for CE
+ * @sn_irq_info: sn asic irq that we need an interrupt generated for
+ *
+ * Given an sn_irq_info struct, set the proper bit in ce_adm_force_int to
+ * force a secondary interrupt to be generated. This is to work around an
+ * asic issue where there is a small window of opportunity for a legacy device
+ * interrupt to be lost.
+ */
+static void tioce_force_interrupt(struct sn_irq_info *sn_irq_info)
+{
+ struct pcidev_info *pcidev_info;
+ struct tioce_common *ce_common;
+ struct tioce *ce_mmr;
+ uint64_t force_int_val;
+
+ if (!sn_irq_info->irq_bridge)
+ return;
+
+ if (sn_irq_info->irq_bridge_type != PCIIO_ASIC_TYPE_TIOCE)
+ return;
+
+ pcidev_info = (struct pcidev_info *)sn_irq_info->irq_pciioinfo;
+ if (!pcidev_info)
+ return;
+
+ ce_common = (struct tioce_common *)pcidev_info->pdi_pcibus_info;
+ ce_mmr = (struct tioce *)ce_common->ce_pcibus.bs_base;
+
+ /*
+ * irq_int_bit is originally set up by prom, and holds the interrupt
+ * bit shift (not mask) as defined by the bit definitions in the
+ * ce_adm_int mmr. These shifts are not the same for the
+ * ce_adm_force_int register, so do an explicit mapping here to make
+ * things clearer.
+ */
+
+ switch (sn_irq_info->irq_int_bit) {
+ case CE_ADM_INT_PCIE_PORT1_DEV_A_SHFT:
+ force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT1_DEV_A_SHFT;
+ break;
+ case CE_ADM_INT_PCIE_PORT1_DEV_B_SHFT:
+ force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT1_DEV_B_SHFT;
+ break;
+ case CE_ADM_INT_PCIE_PORT1_DEV_C_SHFT:
+ force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT1_DEV_C_SHFT;
+ break;
+ case CE_ADM_INT_PCIE_PORT1_DEV_D_SHFT:
+ force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT1_DEV_D_SHFT;
+ break;
+ case CE_ADM_INT_PCIE_PORT2_DEV_A_SHFT:
+ force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT2_DEV_A_SHFT;
+ break;
+ case CE_ADM_INT_PCIE_PORT2_DEV_B_SHFT:
+ force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT2_DEV_B_SHFT;
+ break;
+ case CE_ADM_INT_PCIE_PORT2_DEV_C_SHFT:
+ force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT2_DEV_C_SHFT;
+ break;
+ case CE_ADM_INT_PCIE_PORT2_DEV_D_SHFT:
+ force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT2_DEV_D_SHFT;
+ break;
+ default:
+ return;
+ }
+ ce_mmr->ce_adm_force_int = force_int_val;
+}
+
+/**
+ * tioce_bus_fixup - perform final PCI fixup for a TIO CE bus
+ * @prom_bussoft: Common prom/kernel struct representing the bus
+ *
+ * Replicates the tioce_common pointed to by @prom_bussoft in kernel
+ * space. Allocates and initializes a kernel-only area for a given CE,
+ * and sets up an irq for handling CE error interrupts.
+ *
+ * On successful setup, returns the kernel version of tioce_common back to
+ * the caller.
+ */
+static void *tioce_bus_fixup(struct pcibus_bussoft *prom_bussoft,
+ struct pci_controller *controller)
+{
+ struct tioce_common *tioce_common;
+
+ /*
+ * Allocate kernel bus soft and copy from prom.
+ */
+
+ tioce_common = kcalloc(1, sizeof(struct tioce_common), GFP_KERNEL);
+ if (!tioce_common)
+ return NULL;
+
+ memcpy(tioce_common, prom_bussoft, sizeof(struct tioce_common));
+ tioce_common->ce_pcibus.bs_base |= __IA64_UNCACHED_OFFSET;
+
+ if (tioce_kern_init(tioce_common) == NULL) {
+ kfree(tioce_common);
+ return NULL;
+ }
+
+ if (request_irq(SGI_PCIASIC_ERROR,
+ tioce_error_intr_handler,
+ SA_SHIRQ, "TIOCE error", (void *)tioce_common))
+ printk(KERN_WARNING
+ "%s: Unable to get irq %d. "
+ "Error interrupts won't be routed for "
+ "TIOCE bus %04x:%02x\n",
+ __FUNCTION__, SGI_PCIASIC_ERROR,
+ tioce_common->ce_pcibus.bs_persist_segment,
+ tioce_common->ce_pcibus.bs_persist_busnum);
+
+ /*
+ * ###FIXME: need closest node information here
+ */
+ controller->node = -1;
+
+ return tioce_common;
+}
+
+static struct sn_pcibus_provider tioce_pci_interfaces = {
+ .dma_map = tioce_dma,
+ .dma_map_consistent = tioce_dma_consistent,
+ .dma_unmap = tioce_dma_unmap,
+ .bus_fixup = tioce_bus_fixup,
+ .force_interrupt = tioce_force_interrupt
+};
+
+/**
+ * tioce_init_provider - init SN PCI provider ops for TIO CE
+ */
+int tioce_init_provider(void)
+{
+ sn_pci_provider[PCIIO_ASIC_TYPE_TIOCE] = &tioce_pci_interfaces;
+ return 0;
+}
Index: ce-submit2/include/asm-ia64/sn/tioce_provider.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ ce-submit2/include/asm-ia64/sn/tioce_provider.h 2005-08-05
15:07:53.180295410 -0500
@@ -0,0 +1,66 @@
+/**************************************************************************
+ * Copyright (C) 2005, Silicon Graphics, Inc. *
+ * *
+ * These coded instructions, statements, and computer programs
contain *
+ * unpublished proprietary information of Silicon Graphics, Inc.,
and *
+ * are protected by Federal copyright law. They may not be disclosed *
+ * to third parties or copied or duplicated in any form, in whole or *
+ * in part, without the prior written consent of Silicon Graphics, Inc. *
+ * *
+ **************************************************************************/
+
+#ifndef _ASM_IA64_SN_CE_PROVIDER_H
+#define _ASM_IA64_SN_CE_PROVIDER_H
+
+#include <asm/sn/pcibus_provider_defs.h>
+#include <asm/sn/tioce.h>
+
+/*
+ * Common TIOCE structure shared between the prom and kernel
+ *
+ * DO NOT CHANGE THIS STRUCT WITHOUT MAKING CORRESPONDING CHANGES TO THE
+ * PROM VERSION.
+ */
+struct tioce_common {
+ struct pcibus_bussoft ce_pcibus; /* common pciio header */
+
+ uint32_t ce_rev;
+ uint64_t ce_kernel_private;
+ uint64_t ce_prom_private;
+};
+
+struct tioce_kernel {
+ struct tioce_common *ce_common;
+ spinlock_t ce_lock;
+ struct list_head ce_dmamap_list;
+
+ uint64_t ce_ate40_shadow[TIOCE_NUM_M40_ATES];
+ uint64_t ce_ate3240_shadow[TIOCE_NUM_M3240_ATES];
+ uint32_t ce_ate3240_pagesize;
+
+ uint8_t ce_port1_secondary;
+
+ /* per-port resources */
+ struct {
+ int dirmap_refcnt;
+ uint64_t dirmap_shadow;
+ } ce_port[TIOCE_NUM_PORTS];
+};
+
+struct tioce_dmamap {
+ struct list_head ce_dmamap_list; /* headed by tioce_kernel */
+ uint32_t refcnt;
+
+ uint64_t nbytes; /* # bytes mapped */
+
+ uint64_t ct_start; /* coretalk start address */
+ uint64_t pci_start; /* bus start address */
+
+ uint64_t *ate_hw; /* hw ptr of first ate in map */
+ uint64_t *ate_shadow; /* shadow ptr of firat ate */
+ uint16_t ate_count; /* # ate's in the map */
+};
+
+extern int tioce_init_provider(void);
+
+#endif /* __ASM_IA64_SN_CE_PROVIDER_H */
-
To unsubscribe from this list: send the line "unsubscribe linux-ia64" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
