Hi,
[please CC me on replies]
I've got a box running 2.6.10 (with the patch[0] needed to support the Promise SATAII 150 TX4 controller).
This box has three software raid1 partitions mirrored on a SATA disk on the Promise controller and a disk on the mainboard IDE controller (VIA vt8235).
Within 4 days running the raid1, I got those three errors pasted below, each marking the SATA-raidmember as faulty. After "raidhotremove" and "raidhotadd" the SATA-raidmember syncs again fine and works at least a day until it is marked as faulty again.
Any pointers where I could look at to resolve this problem? The SATA drive is a new Seagate ST3250823AS.
I would change out your cables, and also make sure you are running 2.6.11-rc3-bk-latest, which includes all the SATAII patches and other fixes.
JEff
- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
