Simple cleanup to eliminate X copies of the pci_enable_intx() function
in libata. Moved ahci.c's pci_intx() to pci.c and use it throughout
libata and msi.c.
Signed-off-by: Brett Russ <[EMAIL PROTECTED]>
Index: linux-2.6.13-rc6/drivers/scsi/sata_sis.c
===================================================================
--- linux-2.6.13-rc6.orig/drivers/scsi/sata_sis.c
+++ linux-2.6.13-rc6/drivers/scsi/sata_sis.c
@@ -186,18 +186,6 @@ static void sis_scr_write (struct ata_po
outl(val, ap->ioaddr.scr_addr + (sc_reg * 4));
}
-/* move to PCI layer, integrate w/ MSI stuff */
-static void pci_enable_intx(struct pci_dev *pdev)
-{
- u16 pci_command;
-
- pci_read_config_word(pdev, PCI_COMMAND, &pci_command);
- if (pci_command & PCI_COMMAND_INTX_DISABLE) {
- pci_command &= ~PCI_COMMAND_INTX_DISABLE;
- pci_write_config_word(pdev, PCI_COMMAND, pci_command);
- }
-}
-
static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
struct ata_probe_ent *probe_ent = NULL;
@@ -254,7 +242,7 @@ static int sis_init_one (struct pci_dev
}
pci_set_master(pdev);
- pci_enable_intx(pdev);
+ pci_intx(pdev, TRUE);
/* FIXME: check ata_device_add return value */
ata_device_add(probe_ent);
Index: linux-2.6.13-rc6/drivers/scsi/ahci.c
===================================================================
--- linux-2.6.13-rc6.orig/drivers/scsi/ahci.c
+++ linux-2.6.13-rc6/drivers/scsi/ahci.c
@@ -862,22 +862,6 @@ static int ahci_host_init(struct ata_pro
return 0;
}
-/* move to PCI layer, integrate w/ MSI stuff */
-static void pci_intx(struct pci_dev *pdev, int enable)
-{
- u16 pci_command, new;
-
- pci_read_config_word(pdev, PCI_COMMAND, &pci_command);
-
- if (enable)
- new = pci_command & ~PCI_COMMAND_INTX_DISABLE;
- else
- new = pci_command | PCI_COMMAND_INTX_DISABLE;
-
- if (new != pci_command)
- pci_write_config_word(pdev, PCI_COMMAND, pci_command);
-}
-
static void ahci_print_info(struct ata_probe_ent *probe_ent)
{
struct ahci_host_priv *hpriv = probe_ent->private_data;
@@ -978,7 +962,7 @@ static int ahci_init_one (struct pci_dev
if (pci_enable_msi(pdev) == 0)
have_msi = 1;
else {
- pci_intx(pdev, 1);
+ pci_intx(pdev, TRUE);
have_msi = 0;
}
@@ -1044,7 +1028,7 @@ err_out_msi:
if (have_msi)
pci_disable_msi(pdev);
else
- pci_intx(pdev, 0);
+ pci_intx(pdev, FALSE);
pci_release_regions(pdev);
err_out:
if (!pci_dev_busy)
@@ -1083,7 +1067,7 @@ static void ahci_remove_one (struct pci_
if (have_msi)
pci_disable_msi(pdev);
else
- pci_intx(pdev, 0);
+ pci_intx(pdev, FALSE);
pci_release_regions(pdev);
pci_disable_device(pdev);
dev_set_drvdata(dev, NULL);
Index: linux-2.6.13-rc6/drivers/scsi/ata_piix.c
===================================================================
--- linux-2.6.13-rc6.orig/drivers/scsi/ata_piix.c
+++ linux-2.6.13-rc6/drivers/scsi/ata_piix.c
@@ -548,18 +548,6 @@ static void piix_set_dmamode (struct ata
}
}
-/* move to PCI layer, integrate w/ MSI stuff */
-static void pci_enable_intx(struct pci_dev *pdev)
-{
- u16 pci_command;
-
- pci_read_config_word(pdev, PCI_COMMAND, &pci_command);
- if (pci_command & PCI_COMMAND_INTX_DISABLE) {
- pci_command &= ~PCI_COMMAND_INTX_DISABLE;
- pci_write_config_word(pdev, PCI_COMMAND, pci_command);
- }
-}
-
#define AHCI_PCI_BAR 5
#define AHCI_GLOBAL_CTL 0x04
#define AHCI_ENABLE (1 << 31)
@@ -658,7 +646,7 @@ static int piix_init_one (struct pci_dev
* message-signalled interrupts currently).
*/
if (port_info[0]->host_flags & PIIX_FLAG_CHECKINTR)
- pci_enable_intx(pdev);
+ pci_intx(pdev, TRUE);
if (combined) {
port_info[sata_chan] = &piix_port_info[ent->driver_data];
Index: linux-2.6.13-rc6/drivers/pci/msi.c
===================================================================
--- linux-2.6.13-rc6.orig/drivers/pci/msi.c
+++ linux-2.6.13-rc6/drivers/pci/msi.c
@@ -446,10 +446,7 @@ static void enable_msi_mode(struct pci_d
}
if (pci_find_capability(dev, PCI_CAP_ID_EXP)) {
/* PCI Express Endpoint device detected */
- u16 cmd;
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- cmd |= PCI_COMMAND_INTX_DISABLE;
- pci_write_config_word(dev, PCI_COMMAND, cmd);
+ pci_intx(dev, FALSE); /* disable intx */
}
}
@@ -468,10 +465,7 @@ static void disable_msi_mode(struct pci_
}
if (pci_find_capability(dev, PCI_CAP_ID_EXP)) {
/* PCI Express Endpoint device detected */
- u16 cmd;
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- cmd &= ~PCI_COMMAND_INTX_DISABLE;
- pci_write_config_word(dev, PCI_COMMAND, cmd);
+ pci_intx(dev, TRUE); /* enable intx */
}
}
Index: linux-2.6.13-rc6/drivers/pci/pci.c
===================================================================
--- linux-2.6.13-rc6.orig/drivers/pci/pci.c
+++ linux-2.6.13-rc6/drivers/pci/pci.c
@@ -793,6 +793,31 @@ pci_clear_mwi(struct pci_dev *dev)
}
}
+/**
+ * pci_intx - enables/disables PCI INTx for device dev
+ * @dev: the PCI device to operate on
+ * @enable: boolean
+ *
+ * Enables/disables PCI INTx for device dev
+ */
+void
+pci_intx(struct pci_dev *pdev, int enable)
+{
+ u16 pci_command, new;
+
+ pci_read_config_word(pdev, PCI_COMMAND, &pci_command);
+
+ if (enable) {
+ new = pci_command & ~PCI_COMMAND_INTX_DISABLE;
+ } else {
+ new = pci_command | PCI_COMMAND_INTX_DISABLE;
+ }
+
+ if (new != pci_command) {
+ pci_write_config_word(pdev, PCI_COMMAND, pci_command);
+ }
+}
+
#ifndef HAVE_ARCH_PCI_SET_DMA_MASK
/*
* These can be overridden by arch-specific implementations
@@ -870,6 +895,7 @@ EXPORT_SYMBOL(pci_request_region);
EXPORT_SYMBOL(pci_set_master);
EXPORT_SYMBOL(pci_set_mwi);
EXPORT_SYMBOL(pci_clear_mwi);
+EXPORT_SYMBOL_GPL(pci_intx);
EXPORT_SYMBOL(pci_set_dma_mask);
EXPORT_SYMBOL(pci_set_consistent_dma_mask);
EXPORT_SYMBOL(pci_assign_resource);
Index: linux-2.6.13-rc6/include/linux/pci.h
===================================================================
--- linux-2.6.13-rc6.orig/include/linux/pci.h
+++ linux-2.6.13-rc6/include/linux/pci.h
@@ -815,6 +815,7 @@ void pci_set_master(struct pci_dev *dev)
#define HAVE_PCI_SET_MWI
int pci_set_mwi(struct pci_dev *dev);
void pci_clear_mwi(struct pci_dev *dev);
+void pci_intx(struct pci_dev *dev, int enable);
int pci_set_dma_mask(struct pci_dev *dev, u64 mask);
int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask);
void pci_update_resource(struct pci_dev *dev, struct resource *res, int resno);
Index: linux-2.6.13-rc6/drivers/scsi/sata_uli.c
===================================================================
--- linux-2.6.13-rc6.orig/drivers/scsi/sata_uli.c
+++ linux-2.6.13-rc6/drivers/scsi/sata_uli.c
@@ -171,18 +171,6 @@ static void uli_scr_write (struct ata_po
uli_scr_cfg_write(ap, sc_reg, val);
}
-/* move to PCI layer, integrate w/ MSI stuff */
-static void pci_enable_intx(struct pci_dev *pdev)
-{
- u16 pci_command;
-
- pci_read_config_word(pdev, PCI_COMMAND, &pci_command);
- if (pci_command & PCI_COMMAND_INTX_DISABLE) {
- pci_command &= ~PCI_COMMAND_INTX_DISABLE;
- pci_write_config_word(pdev, PCI_COMMAND, pci_command);
- }
-}
-
static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
struct ata_probe_ent *probe_ent;
@@ -255,7 +243,7 @@ static int uli_init_one (struct pci_dev
}
pci_set_master(pdev);
- pci_enable_intx(pdev);
+ pci_intx(pdev, TRUE);
/* FIXME: check ata_device_add return value */
ata_device_add(probe_ent);
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
