Please pull from the 'upstream' branch of
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
to obtain the changes described in the following diffstat/shortlog/patch.
It's mostly fixes for uncommon paths (PIO, ATAPI), and new PCI IDs.
Stuff not urgent enough for 2.6.13.
drivers/scsi/ahci.c | 12 +-
drivers/scsi/ata_piix.c | 14 +-
drivers/scsi/libata-core.c | 249 ++++++++++++++++++++++++++++++++++++--------
drivers/scsi/libata-scsi.c | 66 +++++++++++
drivers/scsi/libata.h | 2
drivers/scsi/sata_nv.c | 24 +++-
drivers/scsi/sata_promise.c | 12 +-
drivers/scsi/sata_qstor.c | 12 +-
drivers/scsi/sata_sil.c | 36 ++++--
drivers/scsi/sata_sis.c | 2
drivers/scsi/sata_svw.c | 10 -
drivers/scsi/sata_sx4.c | 146 +++++++++++++------------
drivers/scsi/sata_uli.c | 2
drivers/scsi/sata_via.c | 2
drivers/scsi/sata_vsc.c | 5
include/linux/ata.h | 2
include/linux/libata.h | 8 -
include/linux/pci_ids.h | 1
18 files changed, 451 insertions(+), 154 deletions(-)
Alan Cox:
libata: typo
libata: regularize dma_start/stop arguments
Albert Lee:
libata ata_data_xfer() fix
libata handle the case when device returns/needs extra data
libata: Clear ATA_QCFLAG_ACTIVE flag before calling the completion callback
Daniel Drake:
sata_nv: Support MCP51/MCP55 device IDs
sata_promise: Add PDC40519 id
Douglas Gilbert:
[libata scsi] add START STOP UNIT translation
Jason Gaston:
ahci: AHCI mode SATA patch for Intel ICH7-M DH
Jeff Garzik:
libata: trim trailing whitespace.
libata: fix EH locking
[libata sata_sil] list documentation URL, since its public
libata: fix a few alan-isms
[libata scsi] fix read/write translation edge cases
Martin Wilck:
Fix HD activity LED with ahci
Otto Meier:
sata_promise: Add PDC40718 id
Tejun Heo:
fix atapi_packet_task vs. intr race (take 2)
libata: implement ata_poll_qc_complete and use it in polling functions
sil: apply M15W quirk selectively (take 2)
diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c
--- a/drivers/scsi/ahci.c
+++ b/drivers/scsi/ahci.c
@@ -269,6 +269,8 @@ static struct pci_device_id ahci_pci_tbl
board_ahci }, /* ESB2 */
{ PCI_VENDOR_ID_INTEL, 0x2683, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_ahci }, /* ESB2 */
+ { PCI_VENDOR_ID_INTEL, 0x27c6, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_ahci }, /* ICH7-M DH */
{ } /* terminate list */
};
@@ -584,12 +586,16 @@ static void ahci_intr_error(struct ata_p
static void ahci_eng_timeout(struct ata_port *ap)
{
- void *mmio = ap->host_set->mmio_base;
+ struct ata_host_set *host_set = ap->host_set;
+ void *mmio = host_set->mmio_base;
void *port_mmio = ahci_port_base(mmio, ap->port_no);
struct ata_queued_cmd *qc;
+ unsigned long flags;
DPRINTK("ENTER\n");
+ spin_lock_irqsave(&host_set->lock, flags);
+
ahci_intr_error(ap, readl(port_mmio + PORT_IRQ_STAT));
qc = ata_qc_from_tag(ap, ap->active_tag);
@@ -607,6 +613,7 @@ static void ahci_eng_timeout(struct ata_
ata_qc_complete(qc, ATA_ERR);
}
+ spin_unlock_irqrestore(&host_set->lock, flags);
}
static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd
*qc)
@@ -696,9 +703,6 @@ static int ahci_qc_issue(struct ata_queu
struct ata_port *ap = qc->ap;
void *port_mmio = (void *) ap->ioaddr.cmd_addr;
- writel(1, port_mmio + PORT_SCR_ACT);
- readl(port_mmio + PORT_SCR_ACT); /* flush */
-
writel(1, port_mmio + PORT_CMD_ISSUE);
readl(port_mmio + PORT_CMD_ISSUE); /* flush */
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -629,13 +629,13 @@ static int piix_init_one (struct pci_dev
port_info[1] = NULL;
if (port_info[0]->host_flags & PIIX_FLAG_AHCI) {
- u8 tmp;
- pci_read_config_byte(pdev, PIIX_SCC, &tmp);
- if (tmp == PIIX_AHCI_DEVICE) {
- int rc = piix_disable_ahci(pdev);
- if (rc)
- return rc;
- }
+ u8 tmp;
+ pci_read_config_byte(pdev, PIIX_SCC, &tmp);
+ if (tmp == PIIX_AHCI_DEVICE) {
+ int rc = piix_disable_ahci(pdev);
+ if (rc)
+ return rc;
+ }
}
if (port_info[0]->host_flags & PIIX_FLAG_COMBINED) {
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -1304,12 +1304,12 @@ static inline u8 ata_dev_knobble(struct
/**
* ata_dev_config - Run device specific handlers and check for
* SATA->PATA bridges
- * @ap: Bus
+ * @ap: Bus
* @i: Device
*
* LOCKING:
*/
-
+
void ata_dev_config(struct ata_port *ap, unsigned int i)
{
/* limit bridge transfers to udma5, 200 sectors */
@@ -2377,6 +2377,27 @@ static int ata_sg_setup(struct ata_queue
}
/**
+ * ata_poll_qc_complete - turn irq back on and finish qc
+ * @qc: Command to complete
+ * @drv_stat: ATA status register content
+ *
+ * LOCKING:
+ * None. (grabs host lock)
+ */
+
+void ata_poll_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat)
+{
+ struct ata_port *ap = qc->ap;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ ap->flags &= ~ATA_FLAG_NOINTR;
+ ata_irq_on(ap);
+ ata_qc_complete(qc, drv_stat);
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+}
+
+/**
* ata_pio_poll -
* @ap:
*
@@ -2438,11 +2459,10 @@ static void ata_pio_complete (struct ata
u8 drv_stat;
/*
- * This is purely hueristic. This is a fast path.
- * Sometimes when we enter, BSY will be cleared in
- * a chk-status or two. If not, the drive is probably seeking
- * or something. Snooze for a couple msecs, then
- * chk-status again. If still busy, fall back to
+ * This is purely heuristic. This is a fast path. Sometimes when
+ * we enter, BSY will be cleared in a chk-status or two. If not,
+ * the drive is probably seeking or something. Snooze for a couple
+ * msecs, then chk-status again. If still busy, fall back to
* PIO_ST_POLL state.
*/
drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 10);
@@ -2467,9 +2487,7 @@ static void ata_pio_complete (struct ata
ap->pio_task_state = PIO_ST_IDLE;
- ata_irq_on(ap);
-
- ata_qc_complete(qc, drv_stat);
+ ata_poll_qc_complete(qc, drv_stat);
}
@@ -2494,6 +2512,20 @@ void swap_buf_le16(u16 *buf, unsigned in
#endif /* __BIG_ENDIAN */
}
+/**
+ * ata_mmio_data_xfer - Transfer data by MMIO
+ * @ap: port to read/write
+ * @buf: data buffer
+ * @buflen: buffer length
+ * @do_write: read/write
+ *
+ * Transfer data from/to the device data register by MMIO.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ *
+ */
+
static void ata_mmio_data_xfer(struct ata_port *ap, unsigned char *buf,
unsigned int buflen, int write_data)
{
@@ -2502,6 +2534,7 @@ static void ata_mmio_data_xfer(struct at
u16 *buf16 = (u16 *) buf;
void __iomem *mmio = (void __iomem *)ap->ioaddr.data_addr;
+ /* Transfer multiple of 2 bytes */
if (write_data) {
for (i = 0; i < words; i++)
writew(le16_to_cpu(buf16[i]), mmio);
@@ -2509,19 +2542,76 @@ static void ata_mmio_data_xfer(struct at
for (i = 0; i < words; i++)
buf16[i] = cpu_to_le16(readw(mmio));
}
+
+ /* Transfer trailing 1 byte, if any. */
+ if (unlikely(buflen & 0x01)) {
+ u16 align_buf[1] = { 0 };
+ unsigned char *trailing_buf = buf + buflen - 1;
+
+ if (write_data) {
+ memcpy(align_buf, trailing_buf, 1);
+ writew(le16_to_cpu(align_buf[0]), mmio);
+ } else {
+ align_buf[0] = cpu_to_le16(readw(mmio));
+ memcpy(trailing_buf, align_buf, 1);
+ }
+ }
}
+/**
+ * ata_pio_data_xfer - Transfer data by PIO
+ * @ap: port to read/write
+ * @buf: data buffer
+ * @buflen: buffer length
+ * @do_write: read/write
+ *
+ * Transfer data from/to the device data register by PIO.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ *
+ */
+
static void ata_pio_data_xfer(struct ata_port *ap, unsigned char *buf,
unsigned int buflen, int write_data)
{
- unsigned int dwords = buflen >> 1;
+ unsigned int words = buflen >> 1;
+ /* Transfer multiple of 2 bytes */
if (write_data)
- outsw(ap->ioaddr.data_addr, buf, dwords);
+ outsw(ap->ioaddr.data_addr, buf, words);
else
- insw(ap->ioaddr.data_addr, buf, dwords);
+ insw(ap->ioaddr.data_addr, buf, words);
+
+ /* Transfer trailing 1 byte, if any. */
+ if (unlikely(buflen & 0x01)) {
+ u16 align_buf[1] = { 0 };
+ unsigned char *trailing_buf = buf + buflen - 1;
+
+ if (write_data) {
+ memcpy(align_buf, trailing_buf, 1);
+ outw(le16_to_cpu(align_buf[0]), ap->ioaddr.data_addr);
+ } else {
+ align_buf[0] = cpu_to_le16(inw(ap->ioaddr.data_addr));
+ memcpy(trailing_buf, align_buf, 1);
+ }
+ }
}
+/**
+ * ata_data_xfer - Transfer data from/to the data register.
+ * @ap: port to read/write
+ * @buf: data buffer
+ * @buflen: buffer length
+ * @do_write: read/write
+ *
+ * Transfer data from/to the device data register.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ *
+ */
+
static void ata_data_xfer(struct ata_port *ap, unsigned char *buf,
unsigned int buflen, int do_write)
{
@@ -2531,6 +2621,16 @@ static void ata_data_xfer(struct ata_por
ata_pio_data_xfer(ap, buf, buflen, do_write);
}
+/**
+ * ata_pio_sector - Transfer ATA_SECT_SIZE (512 bytes) of data.
+ * @qc: Command on going
+ *
+ * Transfer ATA_SECT_SIZE of data from/to the ATA device.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+
static void ata_pio_sector(struct ata_queued_cmd *qc)
{
int do_write = (qc->tf.flags & ATA_TFLAG_WRITE);
@@ -2569,6 +2669,18 @@ static void ata_pio_sector(struct ata_qu
kunmap(page);
}
+/**
+ * __atapi_pio_bytes - Transfer data from/to the ATAPI device.
+ * @qc: Command on going
+ * @bytes: number of bytes
+ *
+ * Transfer Transfer data from/to the ATAPI device.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ *
+ */
+
static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes)
{
int do_write = (qc->tf.flags & ATA_TFLAG_WRITE);
@@ -2578,10 +2690,33 @@ static void __atapi_pio_bytes(struct ata
unsigned char *buf;
unsigned int offset, count;
- if (qc->curbytes == qc->nbytes - bytes)
+ if (qc->curbytes + bytes >= qc->nbytes)
ap->pio_task_state = PIO_ST_LAST;
next_sg:
+ if (unlikely(qc->cursg >= qc->n_elem)) {
+ /*
+ * The end of qc->sg is reached and the device expects
+ * more data to transfer. In order not to overrun qc->sg
+ * and fulfill length specified in the byte count register,
+ * - for read case, discard trailing data from the device
+ * - for write case, padding zero data to the device
+ */
+ u16 pad_buf[1] = { 0 };
+ unsigned int words = bytes >> 1;
+ unsigned int i;
+
+ if (words) /* warning if bytes > 1 */
+ printk(KERN_WARNING "ata%u: %u bytes trailing data\n",
+ ap->id, bytes);
+
+ for (i = 0; i < words; i++)
+ ata_data_xfer(ap, (unsigned char*)pad_buf, 2, do_write);
+
+ ap->pio_task_state = PIO_ST_LAST;
+ return;
+ }
+
sg = &qc->sg[qc->cursg];
page = sg->page;
@@ -2615,11 +2750,21 @@ next_sg:
kunmap(page);
- if (bytes) {
+ if (bytes)
goto next_sg;
- }
}
+/**
+ * atapi_pio_bytes - Transfer data from/to the ATAPI device.
+ * @qc: Command on going
+ *
+ * Transfer Transfer data from/to the ATAPI device.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ *
+ */
+
static void atapi_pio_bytes(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
@@ -2692,9 +2837,7 @@ static void ata_pio_block(struct ata_por
if ((status & ATA_DRQ) == 0) {
ap->pio_task_state = PIO_ST_IDLE;
- ata_irq_on(ap);
-
- ata_qc_complete(qc, status);
+ ata_poll_qc_complete(qc, status);
return;
}
@@ -2724,9 +2867,7 @@ static void ata_pio_error(struct ata_por
ap->pio_task_state = PIO_ST_IDLE;
- ata_irq_on(ap);
-
- ata_qc_complete(qc, drv_stat | ATA_ERR);
+ ata_poll_qc_complete(qc, drv_stat | ATA_ERR);
}
static void ata_pio_task(void *_data)
@@ -2832,8 +2973,10 @@ static void atapi_request_sense(struct a
static void ata_qc_timeout(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
+ struct ata_host_set *host_set = ap->host_set;
struct ata_device *dev = qc->dev;
u8 host_stat = 0, drv_stat;
+ unsigned long flags;
DPRINTK("ENTER\n");
@@ -2844,7 +2987,9 @@ static void ata_qc_timeout(struct ata_qu
if (!(cmd->eh_eflags & SCSI_EH_CANCEL_CMD)) {
/* finish completing original command */
+ spin_lock_irqsave(&host_set->lock, flags);
__ata_qc_complete(qc);
+ spin_unlock_irqrestore(&host_set->lock, flags);
atapi_request_sense(ap, dev, cmd);
@@ -2855,6 +3000,8 @@ static void ata_qc_timeout(struct ata_qu
}
}
+ spin_lock_irqsave(&host_set->lock, flags);
+
/* hack alert! We cannot use the supplied completion
* function from inside the ->eh_strategy_handler() thread.
* libata is the only user of ->eh_strategy_handler() in
@@ -2870,7 +3017,7 @@ static void ata_qc_timeout(struct ata_qu
host_stat = ap->ops->bmdma_status(ap);
/* before we do anything else, clear DMA-Start bit */
- ap->ops->bmdma_stop(ap);
+ ap->ops->bmdma_stop(qc);
/* fall through */
@@ -2888,6 +3035,9 @@ static void ata_qc_timeout(struct ata_qu
ata_qc_complete(qc, drv_stat);
break;
}
+
+ spin_unlock_irqrestore(&host_set->lock, flags);
+
out:
DPRINTK("EXIT\n");
}
@@ -3061,9 +3211,14 @@ void ata_qc_complete(struct ata_queued_c
if (likely(qc->flags & ATA_QCFLAG_DMAMAP))
ata_sg_clean(qc);
+ /* atapi: mark qc as inactive to prevent the interrupt handler
+ * from completing the command twice later, before the error handler
+ * is called. (when rc != 0 and atapi request sense is needed)
+ */
+ qc->flags &= ~ATA_QCFLAG_ACTIVE;
+
/* call completion callback */
rc = qc->complete_fn(qc, drv_stat);
- qc->flags &= ~ATA_QCFLAG_ACTIVE;
/* if callback indicates not to complete command (non-zero),
* return immediately
@@ -3193,11 +3348,13 @@ int ata_qc_issue_prot(struct ata_queued_
break;
case ATA_PROT_ATAPI_NODATA:
+ ap->flags |= ATA_FLAG_NOINTR;
ata_tf_to_host_nolock(ap, &qc->tf);
queue_work(ata_wq, &ap->packet_task);
break;
case ATA_PROT_ATAPI_DMA:
+ ap->flags |= ATA_FLAG_NOINTR;
ap->ops->tf_load(ap, &qc->tf); /* load tf registers */
ap->ops->bmdma_setup(qc); /* set up bmdma */
queue_work(ata_wq, &ap->packet_task);
@@ -3242,7 +3399,7 @@ static void ata_bmdma_setup_mmio (struct
}
/**
- * ata_bmdma_start - Start a PCI IDE BMDMA transaction
+ * ata_bmdma_start_mmio - Start a PCI IDE BMDMA transaction
* @qc: Info associated with this ATA transaction.
*
* LOCKING:
@@ -3413,7 +3570,7 @@ u8 ata_bmdma_status(struct ata_port *ap)
/**
* ata_bmdma_stop - Stop PCI IDE BMDMA transfer
- * @ap: Port associated with this ATA transaction.
+ * @qc: Command we are ending DMA for
*
* Clears the ATA_DMA_START flag in the dma control register
*
@@ -3423,8 +3580,9 @@ u8 ata_bmdma_status(struct ata_port *ap)
* spin_lock_irqsave(host_set lock)
*/
-void ata_bmdma_stop(struct ata_port *ap)
+void ata_bmdma_stop(struct ata_queued_cmd *qc)
{
+ struct ata_port *ap = qc->ap;
if (ap->flags & ATA_FLAG_MMIO) {
void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
@@ -3476,7 +3634,7 @@ inline unsigned int ata_host_intr (struc
goto idle_irq;
/* before we do anything else, clear DMA-Start bit */
- ap->ops->bmdma_stop(ap);
+ ap->ops->bmdma_stop(qc);
/* fall through */
@@ -3551,7 +3709,8 @@ irqreturn_t ata_interrupt (int irq, void
struct ata_port *ap;
ap = host_set->ports[i];
- if (ap && (!(ap->flags & ATA_FLAG_PORT_DISABLED))) {
+ if (ap &&
+ !(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) {
struct ata_queued_cmd *qc;
qc = ata_qc_from_tag(ap, ap->active_tag);
@@ -3603,19 +3762,27 @@ static void atapi_packet_task(void *_dat
/* send SCSI cdb */
DPRINTK("send cdb\n");
assert(ap->cdb_len >= 12);
- ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1);
-
- /* if we are DMA'ing, irq handler takes over from here */
- if (qc->tf.protocol == ATA_PROT_ATAPI_DMA)
- ap->ops->bmdma_start(qc); /* initiate bmdma */
- /* non-data commands are also handled via irq */
- else if (qc->tf.protocol == ATA_PROT_ATAPI_NODATA) {
- /* do nothing */
- }
+ if (qc->tf.protocol == ATA_PROT_ATAPI_DMA ||
+ qc->tf.protocol == ATA_PROT_ATAPI_NODATA) {
+ unsigned long flags;
+
+ /* Once we're done issuing command and kicking bmdma,
+ * irq handler takes over. To not lose irq, we need
+ * to clear NOINTR flag before sending cdb, but
+ * interrupt handler shouldn't be invoked before we're
+ * finished. Hence, the following locking.
+ */
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ ap->flags &= ~ATA_FLAG_NOINTR;
+ ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1);
+ if (qc->tf.protocol == ATA_PROT_ATAPI_DMA)
+ ap->ops->bmdma_start(qc); /* initiate bmdma */
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+ } else {
+ ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1);
- /* PIO commands are handled by polling */
- else {
+ /* PIO commands are handled by polling */
ap->pio_task_state = PIO_ST;
queue_work(ata_wq, &ap->pio_task);
}
@@ -3623,7 +3790,7 @@ static void atapi_packet_task(void *_dat
return;
err_out:
- ata_qc_complete(qc, ATA_ERR);
+ ata_poll_qc_complete(qc, ATA_ERR);
}
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -392,6 +392,60 @@ int ata_scsi_error(struct Scsi_Host *hos
}
/**
+ * ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command
+ * @qc: Storage for translated ATA taskfile
+ * @scsicmd: SCSI command to translate
+ *
+ * Sets up an ATA taskfile to issue STANDBY (to stop) or READ VERIFY
+ * (to start). Perhaps these commands should be preceded by
+ * CHECK POWER MODE to see what power mode the device is already in.
+ * [See SAT revision 5 at www.t10.org]
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ *
+ * RETURNS:
+ * Zero on success, non-zero on error.
+ */
+
+static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc,
+ u8 *scsicmd)
+{
+ struct ata_taskfile *tf = &qc->tf;
+
+ tf->flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR;
+ tf->protocol = ATA_PROT_NODATA;
+ if (scsicmd[1] & 0x1) {
+ ; /* ignore IMMED bit, violates sat-r05 */
+ }
+ if (scsicmd[4] & 0x2)
+ return 1; /* LOEJ bit set not supported */
+ if (((scsicmd[4] >> 4) & 0xf) != 0)
+ return 1; /* power conditions not supported */
+ if (scsicmd[4] & 0x1) {
+ tf->nsect = 1; /* 1 sector, lba=0 */
+ tf->lbah = 0x0;
+ tf->lbam = 0x0;
+ tf->lbal = 0x0;
+ tf->device |= ATA_LBA;
+ tf->command = ATA_CMD_VERIFY; /* READ VERIFY */
+ } else {
+ tf->nsect = 0; /* time period value (0 implies now) */
+ tf->command = ATA_CMD_STANDBY;
+ /* Consider: ATA STANDBY IMMEDIATE command */
+ }
+ /*
+ * Standby and Idle condition timers could be implemented but that
+ * would require libata to implement the Power condition mode page
+ * and allow the user to change it. Changing mode pages requires
+ * MODE SELECT to be implemented.
+ */
+
+ return 0;
+}
+
+
+/**
* ata_scsi_flush_xlat - Translate SCSI SYNCHRONIZE CACHE command
* @qc: Storage for translated ATA taskfile
* @scsicmd: SCSI command to translate (ignored)
@@ -576,11 +630,19 @@ static unsigned int ata_scsi_rw_xlat(str
tf->lbah = scsicmd[3];
VPRINTK("ten-byte command\n");
+ if (qc->nsect == 0) /* we don't support length==0 cmds */
+ return 1;
return 0;
}
if (scsicmd[0] == READ_6 || scsicmd[0] == WRITE_6) {
qc->nsect = tf->nsect = scsicmd[4];
+ if (!qc->nsect) {
+ qc->nsect = 256;
+ if (lba48)
+ tf->hob_nsect = 1;
+ }
+
tf->lbal = scsicmd[3];
tf->lbam = scsicmd[2];
tf->lbah = scsicmd[1] & 0x1f; /* mask out reserved bits */
@@ -620,6 +682,8 @@ static unsigned int ata_scsi_rw_xlat(str
tf->lbah = scsicmd[7];
VPRINTK("sixteen-byte command\n");
+ if (qc->nsect == 0) /* we don't support length==0 cmds */
+ return 1;
return 0;
}
@@ -1435,6 +1499,8 @@ static inline ata_xlat_func_t ata_get_xl
case VERIFY:
case VERIFY_16:
return ata_scsi_verify_xlat;
+ case START_STOP:
+ return ata_scsi_start_stop_xlat;
}
return NULL;
diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h
--- a/drivers/scsi/libata.h
+++ b/drivers/scsi/libata.h
@@ -72,7 +72,7 @@ extern unsigned int ata_scsiop_report_lu
extern void ata_scsi_badcmd(struct scsi_cmnd *cmd,
void (*done)(struct scsi_cmnd *),
u8 asc, u8 ascq);
-extern void ata_scsi_rbuf_fill(struct ata_scsi_args *args,
+extern void ata_scsi_rbuf_fill(struct ata_scsi_args *args,
unsigned int (*actor) (struct ata_scsi_args *args,
u8 *rbuf, unsigned int buflen));
diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c
--- a/drivers/scsi/sata_nv.c
+++ b/drivers/scsi/sata_nv.c
@@ -20,6 +20,12 @@
* If you do not delete the provisions above, a recipient may use your
* version of this file under either the OSL or the GPL.
*
+ * 0.08
+ * - Added support for MCP51 and MCP55.
+ *
+ * 0.07
+ * - Added support for RAID class code.
+ *
* 0.06
* - Added generic SATA support by using a pci_device_id that filters on
* the IDE storage class code.
@@ -48,7 +54,7 @@
#include <linux/libata.h>
#define DRV_NAME "sata_nv"
-#define DRV_VERSION "0.6"
+#define DRV_VERSION "0.8"
#define NV_PORTS 2
#define NV_PIO_MASK 0x1f
@@ -116,7 +122,9 @@ enum nv_host_type
GENERIC,
NFORCE2,
NFORCE3,
- CK804
+ CK804,
+ MCP51,
+ MCP55
};
static struct pci_device_id nv_pci_tbl[] = {
@@ -134,9 +142,18 @@ static struct pci_device_id nv_pci_tbl[]
PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 },
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 },
+ { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, MCP51 },
+ { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, MCP51 },
+ { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, MCP55 },
{ PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_STORAGE_IDE<<8, 0xffff00, GENERIC },
+ { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
+ PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_STORAGE_RAID<<8, 0xffff00, GENERIC },
{ 0, } /* terminate list */
};
@@ -274,7 +291,8 @@ static irqreturn_t nv_interrupt (int irq
struct ata_port *ap;
ap = host_set->ports[i];
- if (ap && (!(ap->flags & ATA_FLAG_PORT_DISABLED))) {
+ if (ap &&
+ !(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) {
struct ata_queued_cmd *qc;
qc = ata_qc_from_tag(ap, ap->active_tag);
diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c
--- a/drivers/scsi/sata_promise.c
+++ b/drivers/scsi/sata_promise.c
@@ -181,6 +181,10 @@ static struct pci_device_id pdc_ata_pci_
board_20319 },
{ PCI_VENDOR_ID_PROMISE, 0x3319, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_20319 },
+ { PCI_VENDOR_ID_PROMISE, 0x3519, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_20319 },
+ { PCI_VENDOR_ID_PROMISE, 0x3d17, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_20319 },
{ PCI_VENDOR_ID_PROMISE, 0x3d18, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_20319 },
@@ -321,11 +325,15 @@ static void pdc_qc_prep(struct ata_queue
static void pdc_eng_timeout(struct ata_port *ap)
{
+ struct ata_host_set *host_set = ap->host_set;
u8 drv_stat;
struct ata_queued_cmd *qc;
+ unsigned long flags;
DPRINTK("ENTER\n");
+ spin_lock_irqsave(&host_set->lock, flags);
+
qc = ata_qc_from_tag(ap, ap->active_tag);
if (!qc) {
printk(KERN_ERR "ata%u: BUG: timeout without command\n",
@@ -359,6 +367,7 @@ static void pdc_eng_timeout(struct ata_p
}
out:
+ spin_unlock_irqrestore(&host_set->lock, flags);
DPRINTK("EXIT\n");
}
@@ -441,7 +450,8 @@ static irqreturn_t pdc_interrupt (int ir
VPRINTK("port %u\n", i);
ap = host_set->ports[i];
tmp = mask & (1 << (i + 1));
- if (tmp && ap && (!(ap->flags & ATA_FLAG_PORT_DISABLED))) {
+ if (tmp && ap &&
+ !(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) {
struct ata_queued_cmd *qc;
qc = ata_qc_from_tag(ap, ap->active_tag);
diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c
--- a/drivers/scsi/sata_qstor.c
+++ b/drivers/scsi/sata_qstor.c
@@ -117,7 +117,7 @@ static void qs_phy_reset(struct ata_port
static void qs_qc_prep(struct ata_queued_cmd *qc);
static int qs_qc_issue(struct ata_queued_cmd *qc);
static int qs_check_atapi_dma(struct ata_queued_cmd *qc);
-static void qs_bmdma_stop(struct ata_port *ap);
+static void qs_bmdma_stop(struct ata_queued_cmd *qc);
static u8 qs_bmdma_status(struct ata_port *ap);
static void qs_irq_clear(struct ata_port *ap);
static void qs_eng_timeout(struct ata_port *ap);
@@ -198,7 +198,7 @@ static int qs_check_atapi_dma(struct ata
return 1; /* ATAPI DMA not supported */
}
-static void qs_bmdma_stop(struct ata_port *ap)
+static void qs_bmdma_stop(struct ata_queued_cmd *qc)
{
/* nothing */
}
@@ -386,7 +386,8 @@ static inline unsigned int qs_intr_pkt(s
DPRINTK("SFF=%08x%08x: sCHAN=%u sHST=%d sDST=%02x\n",
sff1, sff0, port_no, sHST, sDST);
handled = 1;
- if (ap && (!(ap->flags & ATA_FLAG_PORT_DISABLED))) {
+ if (ap && !(ap->flags &
+ (ATA_FLAG_PORT_DISABLED|ATA_FLAG_NOINTR))) {
struct ata_queued_cmd *qc;
struct qs_port_priv *pp = ap->private_data;
if (!pp || pp->state != qs_state_pkt)
@@ -417,7 +418,8 @@ static inline unsigned int qs_intr_mmio(
for (port_no = 0; port_no < host_set->n_ports; ++port_no) {
struct ata_port *ap;
ap = host_set->ports[port_no];
- if (ap && (!(ap->flags & ATA_FLAG_PORT_DISABLED))) {
+ if (ap &&
+ !(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) {
struct ata_queued_cmd *qc;
struct qs_port_priv *pp = ap->private_data;
if (!pp || pp->state != qs_state_mmio)
@@ -431,7 +433,7 @@ static inline unsigned int qs_intr_mmio(
continue;
DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n",
ap->id, qc->tf.protocol, status);
-
+
/* complete taskfile transaction */
pp->state = qs_state_idle;
ata_qc_complete(qc, status);
diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c
--- a/drivers/scsi/sata_sil.c
+++ b/drivers/scsi/sata_sil.c
@@ -24,6 +24,11 @@
* If you do not delete the provisions above, a recipient may use your
* version of this file under either the OSL or the GPL.
*
+ * Documentation for SiI 3112:
+ * http://gkernel.sourceforge.net/specs/sii/3112A_SiI-DS-0095-B2.pdf.bz2
+ *
+ * Other errata and documentation available under NDA.
+ *
*/
#include <linux/kernel.h>
@@ -41,8 +46,11 @@
#define DRV_VERSION "0.9"
enum {
+ SIL_FLAG_MOD15WRITE = (1 << 30),
+
sil_3112 = 0,
- sil_3114 = 1,
+ sil_3112_m15w = 1,
+ sil_3114 = 2,
SIL_FIFO_R0 = 0x40,
SIL_FIFO_W0 = 0x41,
@@ -76,13 +84,13 @@ static void sil_scr_write (struct ata_po
static void sil_post_set_mode (struct ata_port *ap);
static struct pci_device_id sil_pci_tbl[] = {
- { 0x1095, 0x3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
- { 0x1095, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
+ { 0x1095, 0x3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w },
+ { 0x1095, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w },
{ 0x1095, 0x3512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
{ 0x1095, 0x3114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3114 },
- { 0x1002, 0x436e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
- { 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
- { 0x1002, 0x437a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
+ { 0x1002, 0x436e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w },
+ { 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w },
+ { 0x1002, 0x437a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w },
{ } /* terminate list */
};
@@ -174,6 +182,16 @@ static struct ata_port_info sil_port_inf
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
.port_ops = &sil_ops,
+ }, /* sil_3112_15w - keep it sync'd w/ sil_3112 */
+ {
+ .sht = &sil_sht,
+ .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_SRST | ATA_FLAG_MMIO |
+ SIL_FLAG_MOD15WRITE,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = 0x3f, /* udma0-5 */
+ .port_ops = &sil_ops,
}, /* sil_3114 */
{
.sht = &sil_sht,
@@ -323,15 +341,15 @@ static void sil_dev_config(struct ata_po
while ((len > 0) && (s[len - 1] == ' '))
len--;
- for (n = 0; sil_blacklist[n].product; n++)
+ for (n = 0; sil_blacklist[n].product; n++)
if (!memcmp(sil_blacklist[n].product, s,
strlen(sil_blacklist[n].product))) {
quirks = sil_blacklist[n].quirk;
break;
}
-
+
/* limit requests to 15 sectors */
- if (quirks & SIL_QUIRK_MOD15WRITE) {
+ if ((ap->flags & SIL_FLAG_MOD15WRITE) && (quirks &
SIL_QUIRK_MOD15WRITE)) {
printk(KERN_INFO "ata%u(%u): applying Seagate errata fix\n",
ap->id, dev->devno);
ap->host->max_sectors = 15;
diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c
--- a/drivers/scsi/sata_sis.c
+++ b/drivers/scsi/sata_sis.c
@@ -234,7 +234,7 @@ static int sis_init_one (struct pci_dev
pci_read_config_dword(pdev, SIS_GENCTL, &genctl);
if ((genctl & GENCTL_IOMAPPED_SCR) == 0)
probe_ent->host_flags |= SIS_FLAG_CFGSCR;
-
+
/* if hardware thinks SCRs are in IO space, but there are
* no IO resources assigned, change to PCI cfg space.
*/
diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c
--- a/drivers/scsi/sata_svw.c
+++ b/drivers/scsi/sata_svw.c
@@ -195,18 +195,18 @@ static void k2_bmdma_start_mmio (struct
/* start host DMA transaction */
dmactl = readb(mmio + ATA_DMA_CMD);
writeb(dmactl | ATA_DMA_START, mmio + ATA_DMA_CMD);
- /* There is a race condition in certain SATA controllers that can
- be seen when the r/w command is given to the controller before the
+ /* There is a race condition in certain SATA controllers that can
+ be seen when the r/w command is given to the controller before the
host DMA is started. On a Read command, the controller would initiate
the command to the drive even before it sees the DMA start. When
there
- are very fast drives connected to the controller, or when the data
request
+ are very fast drives connected to the controller, or when the data
request
hits in the drive cache, there is the possibility that the drive
returns a part
or all of the requested data to the controller before the DMA start
is issued.
In this case, the controller would become confused as to what to do
with the data.
In the worst case when all the data is returned back to the
controller, the
controller could hang. In other cases it could return partial data
returning
in data corruption. This problem has been seen in PPC systems and
can also appear
- on an system with very fast disks, where the SATA controller is
sitting behind a
+ on an system with very fast disks, where the SATA controller is
sitting behind a
number of bridges, and hence there is significant latency between
the r/w command
and the start command. */
/* issue r/w command if the access is to ATA*/
@@ -214,7 +214,7 @@ static void k2_bmdma_start_mmio (struct
ap->ops->exec_command(ap, &qc->tf);
}
-
+
static u8 k2_stat_check_status(struct ata_port *ap)
{
return readl((void *) ap->ioaddr.status_addr);
diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c
--- a/drivers/scsi/sata_sx4.c
+++ b/drivers/scsi/sata_sx4.c
@@ -94,7 +94,7 @@ enum {
PDC_DIMM1_CONTROL_OFFSET = 0x84,
PDC_SDRAM_CONTROL_OFFSET = 0x88,
PDC_I2C_WRITE = 0x00000000,
- PDC_I2C_READ = 0x00000040,
+ PDC_I2C_READ = 0x00000040,
PDC_I2C_START = 0x00000080,
PDC_I2C_MASK_INT = 0x00000020,
PDC_I2C_COMPLETE = 0x00010000,
@@ -105,16 +105,16 @@ enum {
PDC_DIMM_SPD_COLUMN_NUM = 4,
PDC_DIMM_SPD_MODULE_ROW = 5,
PDC_DIMM_SPD_TYPE = 11,
- PDC_DIMM_SPD_FRESH_RATE = 12,
- PDC_DIMM_SPD_BANK_NUM = 17,
+ PDC_DIMM_SPD_FRESH_RATE = 12,
+ PDC_DIMM_SPD_BANK_NUM = 17,
PDC_DIMM_SPD_CAS_LATENCY = 18,
- PDC_DIMM_SPD_ATTRIBUTE = 21,
+ PDC_DIMM_SPD_ATTRIBUTE = 21,
PDC_DIMM_SPD_ROW_PRE_CHARGE = 27,
- PDC_DIMM_SPD_ROW_ACTIVE_DELAY = 28,
+ PDC_DIMM_SPD_ROW_ACTIVE_DELAY = 28,
PDC_DIMM_SPD_RAS_CAS_DELAY = 29,
PDC_DIMM_SPD_ACTIVE_PRECHARGE = 30,
PDC_DIMM_SPD_SYSTEM_FREQ = 126,
- PDC_CTL_STATUS = 0x08,
+ PDC_CTL_STATUS = 0x08,
PDC_DIMM_WINDOW_CTLR = 0x0C,
PDC_TIME_CONTROL = 0x3C,
PDC_TIME_PERIOD = 0x40,
@@ -157,15 +157,15 @@ static void pdc_exec_command_mmio(struct
static void pdc20621_host_stop(struct ata_host_set *host_set);
static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe);
static int pdc20621_detect_dimm(struct ata_probe_ent *pe);
-static unsigned int pdc20621_i2c_read(struct ata_probe_ent *pe,
+static unsigned int pdc20621_i2c_read(struct ata_probe_ent *pe,
u32 device, u32 subaddr, u32 *pdata);
static int pdc20621_prog_dimm0(struct ata_probe_ent *pe);
static unsigned int pdc20621_prog_dimm_global(struct ata_probe_ent *pe);
#ifdef ATA_VERBOSE_DEBUG
-static void pdc20621_get_from_dimm(struct ata_probe_ent *pe,
+static void pdc20621_get_from_dimm(struct ata_probe_ent *pe,
void *psource, u32 offset, u32 size);
#endif
-static void pdc20621_put_to_dimm(struct ata_probe_ent *pe,
+static void pdc20621_put_to_dimm(struct ata_probe_ent *pe,
void *psource, u32 offset, u32 size);
static void pdc20621_irq_clear(struct ata_port *ap);
static int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc);
@@ -825,7 +825,8 @@ static irqreturn_t pdc20621_interrupt (i
ap = host_set->ports[port_no];
tmp = mask & (1 << i);
VPRINTK("seq %u, port_no %u, ap %p, tmp %x\n", i, port_no, ap,
tmp);
- if (tmp && ap && (!(ap->flags & ATA_FLAG_PORT_DISABLED))) {
+ if (tmp && ap &&
+ !(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) {
struct ata_queued_cmd *qc;
qc = ata_qc_from_tag(ap, ap->active_tag);
@@ -847,10 +848,14 @@ static irqreturn_t pdc20621_interrupt (i
static void pdc_eng_timeout(struct ata_port *ap)
{
u8 drv_stat;
+ struct ata_host_set *host_set = ap->host_set;
struct ata_queued_cmd *qc;
+ unsigned long flags;
DPRINTK("ENTER\n");
+ spin_lock_irqsave(&host_set->lock, flags);
+
qc = ata_qc_from_tag(ap, ap->active_tag);
if (!qc) {
printk(KERN_ERR "ata%u: BUG: timeout without command\n",
@@ -884,6 +889,7 @@ static void pdc_eng_timeout(struct ata_p
}
out:
+ spin_unlock_irqrestore(&host_set->lock, flags);
DPRINTK("EXIT\n");
}
@@ -922,7 +928,7 @@ static void pdc_sata_setup_port(struct a
#ifdef ATA_VERBOSE_DEBUG
-static void pdc20621_get_from_dimm(struct ata_probe_ent *pe, void *psource,
+static void pdc20621_get_from_dimm(struct ata_probe_ent *pe, void *psource,
u32 offset, u32 size)
{
u32 window_size;
@@ -936,9 +942,9 @@ static void pdc20621_get_from_dimm(struc
/* hard-code chip #0 */
mmio += PDC_CHIP0_OFS;
- page_mask = 0x00;
- window_size = 0x2000 * 4; /* 32K byte uchar size */
- idx = (u16) (offset / window_size);
+ page_mask = 0x00;
+ window_size = 0x2000 * 4; /* 32K byte uchar size */
+ idx = (u16) (offset / window_size);
writel(0x01, mmio + PDC_GENERAL_CTLR);
readl(mmio + PDC_GENERAL_CTLR);
@@ -947,19 +953,19 @@ static void pdc20621_get_from_dimm(struc
offset -= (idx * window_size);
idx++;
- dist = ((long) (window_size - (offset + size))) >= 0 ? size :
+ dist = ((long) (window_size - (offset + size))) >= 0 ? size :
(long) (window_size - offset);
- memcpy_fromio((char *) psource, (char *) (dimm_mmio + offset / 4),
+ memcpy_fromio((char *) psource, (char *) (dimm_mmio + offset / 4),
dist);
- psource += dist;
+ psource += dist;
size -= dist;
for (; (long) size >= (long) window_size ;) {
writel(0x01, mmio + PDC_GENERAL_CTLR);
readl(mmio + PDC_GENERAL_CTLR);
writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR);
readl(mmio + PDC_DIMM_WINDOW_CTLR);
- memcpy_fromio((char *) psource, (char *) (dimm_mmio),
+ memcpy_fromio((char *) psource, (char *) (dimm_mmio),
window_size / 4);
psource += window_size;
size -= window_size;
@@ -971,14 +977,14 @@ static void pdc20621_get_from_dimm(struc
readl(mmio + PDC_GENERAL_CTLR);
writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR);
readl(mmio + PDC_DIMM_WINDOW_CTLR);
- memcpy_fromio((char *) psource, (char *) (dimm_mmio),
+ memcpy_fromio((char *) psource, (char *) (dimm_mmio),
size / 4);
}
}
#endif
-static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, void *psource,
+static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, void *psource,
u32 offset, u32 size)
{
u32 window_size;
@@ -989,16 +995,16 @@ static void pdc20621_put_to_dimm(struct
struct pdc_host_priv *hpriv = pe->private_data;
void *dimm_mmio = hpriv->dimm_mmio;
- /* hard-code chip #0 */
+ /* hard-code chip #0 */
mmio += PDC_CHIP0_OFS;
- page_mask = 0x00;
- window_size = 0x2000 * 4; /* 32K byte uchar size */
+ page_mask = 0x00;
+ window_size = 0x2000 * 4; /* 32K byte uchar size */
idx = (u16) (offset / window_size);
writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR);
readl(mmio + PDC_DIMM_WINDOW_CTLR);
- offset -= (idx * window_size);
+ offset -= (idx * window_size);
idx++;
dist = ((long)(s32)(window_size - (offset + size))) >= 0 ? size :
(long) (window_size - offset);
@@ -1006,12 +1012,12 @@ static void pdc20621_put_to_dimm(struct
writel(0x01, mmio + PDC_GENERAL_CTLR);
readl(mmio + PDC_GENERAL_CTLR);
- psource += dist;
+ psource += dist;
size -= dist;
for (; (long) size >= (long) window_size ;) {
writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR);
readl(mmio + PDC_DIMM_WINDOW_CTLR);
- memcpy_toio((char *) (dimm_mmio), (char *) psource,
+ memcpy_toio((char *) (dimm_mmio), (char *) psource,
window_size / 4);
writel(0x01, mmio + PDC_GENERAL_CTLR);
readl(mmio + PDC_GENERAL_CTLR);
@@ -1019,7 +1025,7 @@ static void pdc20621_put_to_dimm(struct
size -= window_size;
idx ++;
}
-
+
if (size) {
writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR);
readl(mmio + PDC_DIMM_WINDOW_CTLR);
@@ -1030,12 +1036,12 @@ static void pdc20621_put_to_dimm(struct
}
-static unsigned int pdc20621_i2c_read(struct ata_probe_ent *pe, u32 device,
+static unsigned int pdc20621_i2c_read(struct ata_probe_ent *pe, u32 device,
u32 subaddr, u32 *pdata)
{
void *mmio = pe->mmio_base;
u32 i2creg = 0;
- u32 status;
+ u32 status;
u32 count =0;
/* hard-code chip #0 */
@@ -1049,7 +1055,7 @@ static unsigned int pdc20621_i2c_read(st
readl(mmio + PDC_I2C_ADDR_DATA_OFFSET);
/* Write Control to perform read operation, mask int */
- writel(PDC_I2C_READ | PDC_I2C_START | PDC_I2C_MASK_INT,
+ writel(PDC_I2C_READ | PDC_I2C_START | PDC_I2C_MASK_INT,
mmio + PDC_I2C_CONTROL_OFFSET);
for (count = 0; count <= 1000; count ++) {
@@ -1062,26 +1068,26 @@ static unsigned int pdc20621_i2c_read(st
}
*pdata = (status >> 8) & 0x000000ff;
- return 1;
+ return 1;
}
static int pdc20621_detect_dimm(struct ata_probe_ent *pe)
{
u32 data=0 ;
- if (pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS,
+ if (pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS,
PDC_DIMM_SPD_SYSTEM_FREQ, &data)) {
if (data == 100)
return 100;
} else
return 0;
-
+
if (pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS, 9, &data)) {
- if(data <= 0x75)
+ if(data <= 0x75)
return 133;
} else
return 0;
-
+
return 0;
}
@@ -1091,15 +1097,15 @@ static int pdc20621_prog_dimm0(struct at
u32 spd0[50];
u32 data = 0;
int size, i;
- u8 bdimmsize;
+ u8 bdimmsize;
void *mmio = pe->mmio_base;
static const struct {
unsigned int reg;
unsigned int ofs;
} pdc_i2c_read_data [] = {
- { PDC_DIMM_SPD_TYPE, 11 },
+ { PDC_DIMM_SPD_TYPE, 11 },
{ PDC_DIMM_SPD_FRESH_RATE, 12 },
- { PDC_DIMM_SPD_COLUMN_NUM, 4 },
+ { PDC_DIMM_SPD_COLUMN_NUM, 4 },
{ PDC_DIMM_SPD_ATTRIBUTE, 21 },
{ PDC_DIMM_SPD_ROW_NUM, 3 },
{ PDC_DIMM_SPD_BANK_NUM, 17 },
@@ -1108,7 +1114,7 @@ static int pdc20621_prog_dimm0(struct at
{ PDC_DIMM_SPD_ROW_ACTIVE_DELAY, 28 },
{ PDC_DIMM_SPD_RAS_CAS_DELAY, 29 },
{ PDC_DIMM_SPD_ACTIVE_PRECHARGE, 30 },
- { PDC_DIMM_SPD_CAS_LATENCY, 18 },
+ { PDC_DIMM_SPD_CAS_LATENCY, 18 },
};
/* hard-code chip #0 */
@@ -1116,17 +1122,17 @@ static int pdc20621_prog_dimm0(struct at
for(i=0; i<ARRAY_SIZE(pdc_i2c_read_data); i++)
pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS,
- pdc_i2c_read_data[i].reg,
+ pdc_i2c_read_data[i].reg,
&spd0[pdc_i2c_read_data[i].ofs]);
-
+
data |= (spd0[4] - 8) | ((spd0[21] != 0) << 3) | ((spd0[3]-11) << 4);
- data |= ((spd0[17] / 4) << 6) | ((spd0[5] / 2) << 7) |
+ data |= ((spd0[17] / 4) << 6) | ((spd0[5] / 2) << 7) |
((((spd0[27] + 9) / 10) - 1) << 8) ;
- data |= (((((spd0[29] > spd0[28])
- ? spd0[29] : spd0[28]) + 9) / 10) - 1) << 10;
+ data |= (((((spd0[29] > spd0[28])
+ ? spd0[29] : spd0[28]) + 9) / 10) - 1) << 10;
data |= ((spd0[30] - spd0[29] + 9) / 10 - 2) << 12;
-
- if (spd0[18] & 0x08)
+
+ if (spd0[18] & 0x08)
data |= ((0x03) << 14);
else if (spd0[18] & 0x04)
data |= ((0x02) << 14);
@@ -1135,7 +1141,7 @@ static int pdc20621_prog_dimm0(struct at
else
data |= (0 << 14);
- /*
+ /*
Calculate the size of bDIMMSize (power of 2) and
merge the DIMM size by program start/end address.
*/
@@ -1145,9 +1151,9 @@ static int pdc20621_prog_dimm0(struct at
data |= (((size / 16) - 1) << 16);
data |= (0 << 23);
data |= 8;
- writel(data, mmio + PDC_DIMM0_CONTROL_OFFSET);
+ writel(data, mmio + PDC_DIMM0_CONTROL_OFFSET);
readl(mmio + PDC_DIMM0_CONTROL_OFFSET);
- return size;
+ return size;
}
@@ -1167,12 +1173,12 @@ static unsigned int pdc20621_prog_dimm_g
Refresh Enable (bit 17)
*/
- data = 0x022259F1;
+ data = 0x022259F1;
writel(data, mmio + PDC_SDRAM_CONTROL_OFFSET);
readl(mmio + PDC_SDRAM_CONTROL_OFFSET);
/* Turn on for ECC */
- pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS,
+ pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS,
PDC_DIMM_SPD_TYPE, &spd0);
if (spd0 == 0x02) {
data |= (0x01 << 16);
@@ -1186,22 +1192,22 @@ static unsigned int pdc20621_prog_dimm_g
data |= (1<<19);
writel(data, mmio + PDC_SDRAM_CONTROL_OFFSET);
- error = 1;
+ error = 1;
for (i = 1; i <= 10; i++) { /* polling ~5 secs */
data = readl(mmio + PDC_SDRAM_CONTROL_OFFSET);
if (!(data & (1<<19))) {
error = 0;
- break;
+ break;
}
msleep(i*100);
}
return error;
}
-
+
static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe)
{
- int speed, size, length;
+ int speed, size, length;
u32 addr,spd0,pci_status;
u32 tmp=0;
u32 time_period=0;
@@ -1228,7 +1234,7 @@ static unsigned int pdc20621_dimm_init(s
/* Wait 3 seconds */
msleep(3000);
- /*
+ /*
When timer is enabled, counter is decreased every internal
clock cycle.
*/
@@ -1236,24 +1242,24 @@ static unsigned int pdc20621_dimm_init(s
tcount = readl(mmio + PDC_TIME_COUNTER);
VPRINTK("Time Counter Register (0x44): 0x%x\n", tcount);
- /*
+ /*
If SX4 is on PCI-X bus, after 3 seconds, the timer counter
register should be >= (0xffffffff - 3x10^8).
*/
if(tcount >= PCI_X_TCOUNT) {
ticks = (time_period - tcount);
VPRINTK("Num counters 0x%x (%d)\n", ticks, ticks);
-
+
clock = (ticks / 300000);
VPRINTK("10 * Internal clk = 0x%x (%d)\n", clock, clock);
-
+
clock = (clock * 33);
VPRINTK("10 * Internal clk * 33 = 0x%x (%d)\n", clock, clock);
/* PLL F Param (bit 22:16) */
fparam = (1400000 / clock) - 2;
VPRINTK("PLL F Param: 0x%x (%d)\n", fparam, fparam);
-
+
/* OD param = 0x2 (bit 31:30), R param = 0x5 (bit 29:25) */
pci_status = (0x8a001824 | (fparam << 16));
} else
@@ -1264,21 +1270,21 @@ static unsigned int pdc20621_dimm_init(s
writel(pci_status, mmio + PDC_CTL_STATUS);
readl(mmio + PDC_CTL_STATUS);
- /*
+ /*
Read SPD of DIMM by I2C interface,
and program the DIMM Module Controller.
*/
if (!(speed = pdc20621_detect_dimm(pe))) {
- printk(KERN_ERR "Detect Local DIMM Fail\n");
+ printk(KERN_ERR "Detect Local DIMM Fail\n");
return 1; /* DIMM error */
}
VPRINTK("Local DIMM Speed = %d\n", speed);
- /* Programming DIMM0 Module Control Register (index_CID0:80h) */
+ /* Programming DIMM0 Module Control Register (index_CID0:80h) */
size = pdc20621_prog_dimm0(pe);
VPRINTK("Local DIMM Size = %dMB\n",size);
- /* Programming DIMM Module Global Control Register (index_CID0:88h) */
+ /* Programming DIMM Module Global Control Register (index_CID0:88h) */
if (pdc20621_prog_dimm_global(pe)) {
printk(KERN_ERR "Programming DIMM Module Global Control
Register Fail\n");
return 1;
@@ -1297,30 +1303,30 @@ static unsigned int pdc20621_dimm_init(s
pdc20621_put_to_dimm(pe, (void *) test_parttern1, 0x10040, 40);
pdc20621_get_from_dimm(pe, (void *) test_parttern2, 0x40, 40);
- printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0],
+ printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0],
test_parttern2[1], &(test_parttern2[2]));
- pdc20621_get_from_dimm(pe, (void *) test_parttern2, 0x10040,
+ pdc20621_get_from_dimm(pe, (void *) test_parttern2, 0x10040,
40);
- printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0],
+ printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0],
test_parttern2[1], &(test_parttern2[2]));
pdc20621_put_to_dimm(pe, (void *) test_parttern1, 0x40, 40);
pdc20621_get_from_dimm(pe, (void *) test_parttern2, 0x40, 40);
- printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0],
+ printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0],
test_parttern2[1], &(test_parttern2[2]));
}
#endif
/* ECC initiliazation. */
- pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS,
+ pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS,
PDC_DIMM_SPD_TYPE, &spd0);
if (spd0 == 0x02) {
VPRINTK("Start ECC initialization\n");
addr = 0;
length = size * 1024 * 1024;
while (addr < length) {
- pdc20621_put_to_dimm(pe, (void *) &tmp, addr,
+ pdc20621_put_to_dimm(pe, (void *) &tmp, addr,
sizeof(u32));
addr += sizeof(u32);
}
diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c
--- a/drivers/scsi/sata_uli.c
+++ b/drivers/scsi/sata_uli.c
@@ -214,7 +214,7 @@ static int uli_init_one (struct pci_dev
rc = -ENOMEM;
goto err_out_regions;
}
-
+
switch (board_idx) {
case uli_5287:
probe_ent->port[0].scr_addr = ULI5287_BASE;
diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c
--- a/drivers/scsi/sata_via.c
+++ b/drivers/scsi/sata_via.c
@@ -347,7 +347,7 @@ static int svia_init_one (struct pci_dev
probe_ent = vt6420_init_probe_ent(pdev);
else
probe_ent = vt6421_init_probe_ent(pdev);
-
+
if (!probe_ent) {
printk(KERN_ERR DRV_NAME "(%s): out of memory\n",
pci_name(pdev));
diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c
--- a/drivers/scsi/sata_vsc.c
+++ b/drivers/scsi/sata_vsc.c
@@ -173,7 +173,8 @@ static irqreturn_t vsc_sata_interrupt (i
struct ata_port *ap;
ap = host_set->ports[i];
- if (ap && (!(ap->flags & ATA_FLAG_PORT_DISABLED))) {
+ if (ap && !(ap->flags &
+ (ATA_FLAG_PORT_DISABLED|ATA_FLAG_NOINTR))) {
struct ata_queued_cmd *qc;
qc = ata_qc_from_tag(ap, ap->active_tag);
@@ -342,7 +343,7 @@ static int __devinit vsc_sata_init_one (
pci_set_master(pdev);
- /*
+ /*
* Config offset 0x98 is "Extended Control and Status Register 0"
* Default value is (1 << 28). All bits except bit 28 are reserved in
* DPA mode. If bit 28 is set, LED 0 reflects all ports' activity.
diff --git a/include/linux/ata.h b/include/linux/ata.h
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -108,6 +108,8 @@ enum {
/* ATA device commands */
ATA_CMD_CHK_POWER = 0xE5, /* check power mode */
+ ATA_CMD_STANDBY = 0xE2, /* place in standby power mode */
+ ATA_CMD_IDLE = 0xE3, /* place in idle power mode */
ATA_CMD_EDD = 0x90, /* execute device diagnostic */
ATA_CMD_FLUSH = 0xE7,
ATA_CMD_FLUSH_EXT = 0xEA,
diff --git a/include/linux/libata.h b/include/linux/libata.h
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -113,6 +113,8 @@ enum {
ATA_FLAG_MMIO = (1 << 6), /* use MMIO, not PIO */
ATA_FLAG_SATA_RESET = (1 << 7), /* use COMRESET */
ATA_FLAG_PIO_DMA = (1 << 8), /* PIO cmds via DMA */
+ ATA_FLAG_NOINTR = (1 << 9), /* FIXME: Remove this once
+ * proper HSM is in place. */
ATA_QCFLAG_ACTIVE = (1 << 1), /* cmd not yet ack'd to scsi lyer */
ATA_QCFLAG_SG = (1 << 3), /* have s/g table? */
@@ -363,7 +365,7 @@ struct ata_port_operations {
void (*host_stop) (struct ata_host_set *host_set);
- void (*bmdma_stop) (struct ata_port *ap);
+ void (*bmdma_stop) (struct ata_queued_cmd *qc);
u8 (*bmdma_status) (struct ata_port *ap);
};
@@ -424,7 +426,7 @@ extern void ata_dev_id_string(u16 *id, u
extern void ata_dev_config(struct ata_port *ap, unsigned int i);
extern void ata_bmdma_setup (struct ata_queued_cmd *qc);
extern void ata_bmdma_start (struct ata_queued_cmd *qc);
-extern void ata_bmdma_stop(struct ata_port *ap);
+extern void ata_bmdma_stop(struct ata_queued_cmd *qc);
extern u8 ata_bmdma_status(struct ata_port *ap);
extern void ata_bmdma_irq_clear(struct ata_port *ap);
extern void ata_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat);
@@ -644,7 +646,7 @@ static inline void scr_write(struct ata_
ap->ops->scr_write(ap, reg, val);
}
-static inline void scr_write_flush(struct ata_port *ap, unsigned int reg,
+static inline void scr_write_flush(struct ata_port *ap, unsigned int reg,
u32 val)
{
ap->ops->scr_write(ap, reg, val);
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1249,6 +1249,7 @@
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA 0x0266
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2 0x0267
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE 0x036E
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA 0x036F
#define PCI_DEVICE_ID_NVIDIA_NVENET_12 0x0268
#define PCI_DEVICE_ID_NVIDIA_NVENET_13 0x0269
#define PCI_DEVICE_ID_NVIDIA_MCP51_AUDIO 0x026B
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
